Commit Graph

288 Commits

Author SHA1 Message Date
Andrey A. Chernov
702c5e7e17 ttyinput() fixes:
1) Preserve old buffer contents when input buffer overflows.

Old code clear buffer and rewrite it again, if !MAXBEL
(for MAXBEL it does right thing :-).
F.e. if you type too long string, last chars passed,
not first ones as expected.
Moreover, it flush output queue too in this case without any needs.

2) Don't do IXOFF, if IGNCR and c==\r, ignore completely.

3) If PARMRK is active and !ISTRIP and char == 0377
put yet one 0377 to distinguish it from parity mark sequence.
POSIX standard (thanx Bruce).

Reviewed by:
Submitted by:
Obtained from:
CVS:
1995-03-28 15:25:13 +00:00
Andrey A. Chernov
63cadaef19 Bug fixed:
parity/framing/break not completely ignored when IGN* is set
but cause output restarted.
CVS:
1995-03-28 11:09:35 +00:00
Bruce Evans
b5e8ce9f12 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) and most of the warnings from
`gcc -Wnested-externs'.  Fix all the bugs found.  There were no serious
ones.
1995-03-16 18:17:34 +00:00
Andrey A. Chernov
5d8619d1f2 Workaround IXOFF bug when output queue is full && RTS control is on 1995-02-28 23:21:33 +00:00
Paul Traina
8c5c37cd75 Incorporate bde's code-review comments.
(a) bring back ttselect, now that we have xxxdevtotty() it isn't dangerous.
(b) remove all of the wrappers that have been replaced by ttselect
(c) fix formatting in syscons.c and definition in syscons.h
(d) add cxdevtotty

NOT DONE:
(e) make pcvt work... it was already broken...when someone fixes pcvt to
	link properly, just rename get_pccons to xxxdevtotty and we're done
1995-02-28 00:21:11 +00:00
Ugen J.S. Antsilevich
0739a0dc6e same 1995-02-27 19:47:53 +00:00
Paul Traina
77f77631e7 (a) remove the pointer to each driver's tty structure array from cdevsw
(b) add a function callback vector to tty drivers that will return a pointer
    to a valid tty structure based upon a dev_t
(c) make syscons structures the same size whether or not APM is enabled so
    utilities don't crash if NAPM changes (and make the damn kernel compile!)
(d) rewrite /dev/snp ioctl interface so that it is device driver and i386
    independant
1995-02-25 20:09:44 +00:00
Andrey A. Chernov
81c427da32 Add releasing of input flow control into
ttyflush(FREAD)
1995-02-24 02:36:01 +00:00
Andrey A. Chernov
227b711d8e Add two IXOFF checks to not confuse with CRTS_IFLOW.
Now TS_TBLOCK used as general input flow flag
for both IXOFF and CRTS_IFLOW cases.
1995-02-23 03:02:38 +00:00
Andrey A. Chernov
d8947494e5 Revive hadrware input flow control
Submitted by: iverson@lionheart.com
1995-02-22 23:20:51 +00:00
Andrey A. Chernov
93a56d1fd1 Restore deleted in second time my & bde fixes.
UGEN STOP IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1995-02-15 22:25:51 +00:00
Ugen J.S. Antsilevich
964587caee More changes to support user calls.
It's 22:00  here,utility still to come(hopefully tomorrow
morning..)
1995-02-15 18:41:57 +00:00
Bruce Evans
23564ff8c3 Remove duplicated code from ttymalloc(). Disable ttyfree().
Restore fixes to flushing that were lost in the previous commit.

Clean up snoop changes.

Add my TODO list from 1.1.5.  The improvements in 1.1.5 should be "obtained"
first.
1995-02-15 16:00:56 +00:00
Ugen J.S. Antsilevich
dde8a05baa Here it came-the all-brand-new snoop device..
Users-beware..
It is tested and working for me but probably have some bugs i
didn't noticed so test it and reply...
It can:
 look at what's sent to the user from tty device
 snoop on pty's,vty's and serial tty's
It (still) can't:
 write to tty
 see what user types in local echo mode
It is probably bad styled and
 very dependant on tty_pty.c,sio.c and syscons.c
I would be really happy if another ppl would make their
changes because i am not sure this is the best snoop
we can have..but it is good..:)))))
1995-02-14 21:21:26 +00:00
Andrey A. Chernov
6d50a4a80f Purge queues in ttylclose(), if ttywflush() failed 1995-02-13 02:18:28 +00:00
Andrey A. Chernov
dee8849b8d Replace previous fix with less agressive, just return EIO
if ttywait can't drain queue.
1995-02-13 02:03:57 +00:00
Andrey A. Chernov
911b598f11 1. If some output still present at the end of ttywait, kill it.
2. Even if ttywait() fails, call ttyflush(FREAD) in ttywflush.
This two fixes guarantee that queues are empty after calling ttywflush()
in any case
1995-02-12 23:01:13 +00:00
Jordan K. Hubbard
3663f75c18 >32 PTY support
Submitted by: Heikki Suonsivu <hsu@cs.hut.fi>
1995-02-09 11:13:30 +00:00
Bruce Evans
a2d5fd1975 Disable bogus attempt to switch from the TS_ISOPEN state to the
TS_WOPEN state when CLOCAL is toggled from on to off while there
is no carrier.  There is no way back, and with sio there is no way
forward either (TS_ISOPEN will never be set again for the current
open).  This bug was observed in 1.1 and was fixed in 1.1.5.
1995-02-08 22:02:02 +00:00
Bruce Evans
c9c9e30a03 Increase the reserved clist space for the raw queue from 512 to TTYHOG.
This might help avoid tty buffer overflows on loaded systems.
1995-01-30 06:16:59 +00:00
Bruce Evans
4c5e4b09a7 Fix error handling for new TIOCSDRAINWAIT ioctl. 1995-01-06 14:56:42 +00:00
Andrey A. Chernov
33c38bd574 Fight against hanging modems: add timeout to ttywait.
Reviewed by: Bruce
1995-01-05 00:01:07 +00:00
Andrey A. Chernov
73a361245d Call d_stop in ttyflush not only for WRITE but for READ too
Obtained from: 1.1.5.1
1994-12-04 01:01:45 +00:00
Bruce Evans
d1a795a280 Fix cblock starvation bugs by reserving enough cblocks for minimal
operation of each clist.  Limit the growth of each clist.  Clists
can only grow larger than the reserved minimum if there are free
cblocks in a shared pool.  The size of this pool is now fixed
(this could be improved).  The reserved and maximum sizes are more
carefully allocated for slip and ppp, depending on the mtu.  A maximum
MTU of 16384 is now enforced for ppp.
1994-11-26 19:24:13 +00:00
Bruce Evans
ba77d4e47b Don't block for output in non-blocking mode if clists run out.
Remove an unnecessary test (if the output queue is above high water
then it is nonempty).
1994-11-26 18:54:25 +00:00
Bruce Evans
e8b7f39747 Return immediately from ttwrite() if the ttysleep()s that wait for
a clist return with an error.  There are some clist starvation/deadlock
bugs elsewhere and killing clist hogs didn't help because the breaks
only exited from the inner loops.
1994-11-01 22:23:29 +00:00
David Greenman
26305b211a Round down instead of up in 'kerninfo'/ctrl-T stats code. Incorrect output
can result otherwise.

Submitted by:	John Dyson
1994-10-23 06:18:13 +00:00
Andrey A. Chernov
61181d7df2 ttywait: check conditions again right after oproc
Obtained from: (I know, but can't say :-)
1994-10-15 17:59:02 +00:00
Poul-Henning Kamp
dcd01eb305 Cosmetics: added ()'s and fixed prinf-formats to make gcc silent. 1994-10-08 22:33:43 +00:00
David Greenman
824789192c Use tsleep() rather than sleep so that 'ps' is more informative about
the wait.
1994-10-06 21:07:04 +00:00
Andrey A. Chernov
d32198f15b Add VMIN/VTIME support
Obtained from:  scratch :-)
1994-10-03 01:12:18 +00:00
Poul-Henning Kamp
797f2d22f0 All of this is cosmetic. prototypes, #includes, printfs and so on. Makes
GCC a lot more silent.
1994-10-02 17:35:40 +00:00
David Greenman
9a500b2bcc Added support for TIOCSTAT ioctl. This allows shells that use raw/cbreak
tty modes to process a control-T and do the right thing.
1994-08-18 09:16:37 +00:00
David Greenman
3c4dd3568f Added $Id$ 1994-08-02 07:55:43 +00:00
David Greenman
9b970c5afa Allow for output processing routine to handle entire character buffer
and thus not require a sleep/wakeup.
Reviewed by:
Submitted by:
1994-08-01 10:42:26 +00:00
David Greenman
c16bf37e86 Added code to allocate and deallocate a number of cblocks on open/close of
a tty.
Note that this might  conflict with the collateral use of TS_WOPEN, but
for the moment I can find no problems associated with this. (TS_WOPEN
will likely go away in the future anyway). This should be looked at
again in the future (the potential problem is that the cblock pool
may either run out or accumulate too many cblocks).
1994-07-06 06:42:34 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Rodney W. Grimes
df8bae1de4 BSD 4.4 Lite Kernel Sources 1994-05-24 10:09:53 +00:00