Passing a count of zero on i386 and amd64 for [I386|AMD64]_BUS_SPACE_MEM
causes a crash/hang since the 'loop' instruction decrements the counter
before checking if it's zero.
PR: kern/80980
Discussed with: jhb
functions, they are unused. Remove 'user' from npxgetuserregs()
etc. names.
For {npx,fpu}{get,set}regs(), always use pcb->pcb_user_save for FPU
context storage. This eliminates the need for ugly copying with
overwrite of the newly added and reserved fields in ucontext on i386
to satisfy alignment requirements for fpusave() and fpurstor().
pc98 version was copied from i386.
Suggested and reviewed by: bde
Tested by: pho (i386 and amd64)
MFC after: 1 week
assembly instruction "movw %rcx,2(%rax)" to "movw %cx,2(%rax)", since
the intent was to move 16 bits of data, in this case.
Found by: clang
Reviewed by: kib
Flushing TLBs is required to ensure cache coherency according to the AMD64
architecture manual. Flushing caches is only required when changing from a
cacheable memory type (WB, WP, or WT) to an uncacheable type (WC, UC, or
UC-). Since this function is only used once per processor during startup,
there is no need to take any shortcuts.
- Leave PAT indices 0-3 at the default of WB, WT, UC-, and UC. Program 5 as
WP (from default WT) and 6 as WC (from default UC-). Leave 4 and 7 at the
default of WB and UC. This is to avoid transition from a cacheable memory
type to an uncacheable type to minimize possible cache incoherency. Since
we perform flushing caches and TLBs now, this change may not be necessary
any more but we do not want to take any chances.
- Remove Apple hardware specific quirks. With the above changes, it seems
this hack is no longer needed.
- Improve pmap_cache_bits() with an array to map PAT memory type to index.
This array is initialized early from pmap_init_pat(), so that we do not need
to handle special cases in the function any more. Now this function is
identical on both amd64 and i386.
Reviewed by: jhb
Tested by: RM (reuf_m at hotmail dot com)
Ryszard Czekaj (rychoo at freeshell dot net)
army.of.root (army dot of dot root at googlemail dot com)
MFC after: 3 days
These MSRs can be used to determine actual (average) performance as
compared to a maximum defined performance.
Availability of these MSRs is indicated by bit0 in CPUID.6.ECX on both
Intel and AMD processors.
MFC after: 5 days
It seems that this MSR has been available in a range of AMD processors
families for quite a while now.
Note1: not all AMD MSRs that are found in amd64 specialreg.h are also in
the i386 version.
Note2: perhaps some additional name component is needed to distinguish
AMD-specific MSRs.
MFC after: 5 days
no noticeable change because we enable caches before we enter here for both
BSP and AP cases. Remove another pointless optimization for CR4.PGE bit
while I am here.
code but probably it only worked by chance because modifying CR4.PGE bit
causes invlidation of entire TLBs. Since these are very rare events, this
micro-optimization seems useless.
Reviewed by: jhb
The ports/Mk/bsd.port.mk uses sys/param.h to fetch osrel, and cannot
grok several constants with the prefix.
Reported and tested by: swell.k gmail com
MFC after: 1 week
After KVA space was increased to 512GB on amd64 it became impractical
to use PTEs as entries in the minidump map of dumped pages, because size
of that map alone would already be 1GB.
Instead, we now use PDEs as page map entries and employ two stage lookup
in libkvm: virtual address -> PDE -> PTE -> physical address. PTEs are
now dumped as regular pages. Fixed page map size now is 2MB.
libkvm keeps support for accessing amd64 minidumps of version 1.
Support for 1GB pages is added.
Many thanks to Alan Cox for his guidance, numerous reviews, suggestions,
enhancments and corrections.
Reviewed by: alc [kernel part]
MFC after: 15 days
contents of the ones that were not empty were stale and unused.
- Now that <machine/mutex.h> no longer exists, there is no need to allow it
to override various helper macros in <sys/mutex.h>.
- Rename various helper macros for low-level operations on mutexes to live
in the _mtx_* or __mtx_* namespaces. While here, change the names to more
closely match the real API functions they are backing.
- Drop support for including <sys/mutex.h> in assembly source files.
Suggested by: bde (1, 2)
work properly with single-stepping in a kernel debugger. Specifically,
these routines have always disabled interrupts before increasing the nesting
count and restored the prior state of interrupts after decreasing the nesting
count to avoid problems with a nested interrupt not disabling interrupts
when acquiring a spin lock. However, trap interrupts for single-stepping
can still occur even when interrupts are disabled. Now the saved state of
interrupts is not saved in the thread until after interrupts have been
disabled and the nesting count has been increased. Similarly, the saved
state from the thread cannot be read once the nesting count has been
decreased to zero. To fix this, use temporary variables to store interrupt
state and shuffle it between the thread's MD area and the appropriate
registers.
In cooperation with: bde
MFC after: 1 month
This could lead to a division by zero if hardware is multi-core and/or
multi-threaded, but for some (quite unusual) reason FreeBSD sees only
one logical processor. This could happen, for example, if neither MADT
nor MP Table are presented by BIOS.
Also:
- assert in topo_probe_0x4 that BSP is accounted for
- neither cpu_cores nor cpu_logical should be zero after successful
probing, so either being zero is an indication of failed probing
Reported by: vwe, Dan Allen <danallen46@airwired.net>
Tested by: Dan Allen <danallen46@airwired.net>
MFC after: 3 days
when routing interrupts instead of cpu_apic_ids[0] since cpu_apic_ids[]
is only populated for multiple-CPU machines. This also matches what the
code does when SMP is not enabled.
PR: bin/151616
Tested by: "Damian S. Kolodziejczyk" damkol | gmail
Submitted by: avg
MFC after: 1 week
physical page mapping should span two or more MTRRs of different types.
Add a pmap function, pmap_demote_DMAP(), by which the MTRR module can
ensure that the direct map region doesn't have such a mapping.
[2] Fix a couple of nearby style errors in amd64_mrset().
[3] Re-enable the use of 1GB page mappings for implementing the direct
map. (See also r197580 and r213897.)
Tested by: kib@ on a Westmere-family processor [3]
MFC after: 3 weeks
use pmap_extract() rather than pmap_kextract() on direct map addresses.
Thus, pmap_extract() needs to be able to deal with 1GB page mappings if
we are to use 1GB page mappings for the direct map. (See r197580.)
kernel of exactly the same __FreeBSD_version as the headers module was
compiled against.
Mark our in-tree ABI emulators with DECLARE_MODULE_TIED. The modules
use kernel interfaces that the Release Engineering Team feel are not
stable enough to guarantee they will not change during the life cycle
of a STABLE branch. In particular, the layout of struct sysentvec is
declared to be not part of the STABLE KBI.
Discussed with: bz, rwatson
Approved by: re (bz, kensmith)
MFC after: 2 weeks
