SR-IOV devices usually use Alternative Routing ID (ARI).
In that case slot/device is always assumed to be 0 and
function/identifier is extended to 8 bits.
Fix interrupts delivery to VF IDs beyond 8 by using a correct
DevID if ARI is enabled.
Reviewed by: jhb, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5855
adds the new I-Data (Interleaved Data) message. This allows a user
to be able to have complete freedom from Head Of Line blocking that
was previously there due to the in-ability to send multiple large
messages without the TSN's being in sequence. The code as been
tested with Michaels various packet drill scripts as well as
inter-networking between the IETF's location in Argentina and Germany.
The SoCs I've tried the driver with include the following:
RT3050, RT5350, RT3662, RT3883, MT7620, MT7621, MT7688.
On boards, based on the above SoCs traffic is passing through correctly
and the boards survive a flood ping with very little or no drops (drops
may be caused elsewhere in my test setup, however).
One issue still remains and needs to be fixed in the future: if_rt does
not survive an ifconfig rt0 down/ifconfig rt0 up cycle.
This issue existed before this commit as well, however.
Reviewed by: ray
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5864
Suggested by: jhb
Reviewed by: Dexuan Cui <decui microsoft com>, Jun Su <junsu microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5850
It is needed by the hypervisor FreeBSD guest to allocate/free private
interrupt vectors.
Reviewed by: kib, jhb, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5849
FreeBSD doesn't specifically list this as a supported error, and in some
configurations/versions of FreeBSD, this test will segfault as the memory
address might be evaluated in userspace, instead of in kernel space like
in NetBSD.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
First of all sema_post() can't be called w/ spinlock, and the channel
message queue processing is not on hot code path, i.e. spinlock is not
necessary.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5812
Since atomic_thread_fence_seq_cst() will become compiler fence on UP kernel.
Reviewed by: kib, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5852
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
for bad packets are named ipf_fi_bad_*. An example of its use might be:
dtrace -n 'sdt:::ipf_fi_bad_* { stack(); }'
Reviewed by: Darren Reed <darrenr@reed.wattle.id.au>
Add support for 4k sector GELI encrypted partitions to the bootloader
This is the default created by the installer
Because the IV is different for each sector, and the XTS tweak carries forward you can not decrypt a partial sector if the starting offset is not 0
Make boot2 and the loader read in 4k aligned chunks
Reviewed by: ed, oshogbo
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D5820
This fixes a major performance regression when reading db files such as
the pw database during a 'pkg install'.
MFC after: 1 week
Tested by: bapt
Reviewed by: bapt
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5868
We're currently seeing how hard it would be to run CloudABI binaries on
operating systems cannot be modified easily (Windows, Mac OS X). The
idea is that we want to just run them without any sandboxing. Now
that CloudABI executables are PIE, this is already a bit easier, but TLS
is still problematic:
- CloudABI executables want to write to the %fs, which typically
requires extra system calls by the emulator every time it needs to
switch between CloudABI's and its own TLS.
- If CloudABI executables overwrite the %fs base unconditionally, it
also becomes harder for the emulator to store a backup of the old
value of %fs. To solve this, let's no longer overwrite %fs, but just
%fs:0.
As CloudABI's C library does not use a TCB, this space can now be used
by an emulator to keep track of its internal state. The executable can
now safely overwrite %fs:0, as long as it makes sure that the TCB is
copied over to the new TLS area.
Ensure that there is an initial TLS area set up when the process starts,
only containing a bogus TCB. We don't really care about its contents on
FreeBSD.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5836
Allow using DTRACE for performance analysis of userspace
applications - the function call stack can be captured.
This is almost an exact copy of AMD64 solution.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: emaste, gnn, jhibbits
Differential Revision: https://reviews.freebsd.org/D5779
Instead of providing a wrapper around device_delete_child() that the PCI
bus and child bus drivers must call explicitly, move the bulk of the logic
from pci_delete_child() into a bus_child_deleted() method
(pci_child_deleted()). This allows PCI devices to be safely deleted via
device_delete_child().
- Add a bus_child_deleted method to the ACPI PCI bus which clears the
device_t associated with the corresponding ACPI handle in addition to
the normal PCI bus cleanup.
- Change cardbus_detach_card to call device_delete_children() and move
CardBus-specific delete logic into a new cardbus_child_deleted() method.
- Use device_delete_child() instead of pci_delete_child() in the SRIOV code.
- Add a bus_child_deleted method to the OpenFirmware PCI bus drivers which
frees the OpenFirmware device info for each PCI device.
Reviewed by: imp
Tested on: amd64 (CardBus and PCI-e hotplug)
Differential Revision: https://reviews.freebsd.org/D5831
A-MSDU is another 11n aggregation mechanism where multiple ethernet
frames get LLC encapsulated (so they have a length field), padded,
and put in a single MPDU (802.11 MAC frame.) This means it gets sent
out as a single frame, with a single seqno, it's acked as one frame, etc.
It turns out that, hah, atheros fast frames is almost but not quite
like this, so I'm reusing all of the current superg/fast-frames stuff
in order to actually transmit A-MSDU. Yes, this means that A-MSDU
frames are also only aggregated two at a time, so it's not necessarily
a huge win, but it's better than nothing.
This doesn't do anything by default - the driver needs to say it does
A-MSDU as well as set the AMSDU software TX capability so this code path
gets exercised.
For now, the only driver that enables this is urtwn. I'll enable it
for rsu at some point soon.
Tested:
* Add an amsdu encap path to aggregate two frames, same as the
fast-frames path.
* Always do the superg init/teardown and node init/teardown stuff,
regardless of whether the nodes are doing fast-frames (the ATH
capability stuff.) That way we can reuse it for amsdu.
* Don't do AMSDU for multicast/broadcast and EAPOL frames.
* If we're doing A-MPDU, then don't bother doing FF/A-MSDU.
We can likely do both together, but I don't want to change
behaviour.
* Teach the fast frames approx txtime logic to support the 11n
rates. But, since we don't currently have a full "current rate"
support, assume it's HT20, long-gi, etc. That way we overshoot
on the TX time estimation, so we're always inside the requirements.
(And we only aggregate two frames for now, so we're not really
going to exceed that.)
* Drop the maximum FF age default down to 2ms, otherwise we end up
with some very annoyingly large latencies.
TODO:
* We only aggregate two ethernet frames, so I'm not checking the max
A-MSDU size. But when it comes time to support >2 frames, we should
obey that.
Tested:
* urtwn(4)
This appears to be implementation dependent but convenient and makes
our sed behave more like GNU sed.
Given that it is not the historic behavior, bump FreeBSD_version
should userland/ports somehow depend on it.
Obtained from: NetBSD (bin/49872)
Reviewed by: bdrewery
PR: 208554
Merge after: NEVER
We were setting an incorrect/undefined size and as it came out the st
struct was not really being used at all. This was actually a bug but
by sheer luck it had no visual effect.
CID: 1194320
Reviewed by: grehan
kern.features.linux: 1 meaning linux 32 bits binaries are supported
kern.features.linux64: 1 meaning linux 64 bits binaries are supported
The goal here is to help 3rd party applications (including ports) to determine
if the host do support linux emulation
Reviewed by: dchagin
MFC after: 1 week
Relnotes: yes
Differential Revision: D5830
The urtwn hardware transmits FF/A-MSDU just fine - it takes an 802.11
frame and will dutifully send the thing.
So:
* bump RX queue up from 1. Why's it 1? That's really silly.
* Add the "software A-MSDU" encap capability bit.
* bump the TX buffer size up so we can at least send A-MSDU frames.
* track active frames submitted to the NIC - we can't make assumptions
about how many are in flight in the NIC though. For 88E parts we
could use per-packet TX indication, but for R92 parts we can't.
So, just fake it somewhat.
* Kick the transmit queue when we finish reception; try to avoid stalls.
* Kick the FF queue a little more regularly.
A-MSDU TX won't happen until the net80211 side is done, but atheros
fast-frames support should now work.
Tested:
* urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R ; A-MSDU transmit.
* begin moving the 11n macros out of ieee80211_phy.c and
into a header so they can be used elsewhere.
* rename some of them into the IEEE80211_* namespace.
* convert HT_RC_2_MCS() to work with three-stream rates.
do software A-MSDU encapsulation.
Right now there's AMSDU TX/RX capability bits and they're mostly
unused, however I'd like to maintain those as the general configuration,
not also "please software encap AMSDU." For platforms that can do
A-MSDU in firmware (iwn, iwm, etc) then their init paths can read
this flag to configure A-MSDU.
ncq was not being inititialized properly but it was not actually
necessary either, so make the code smaller by removing it.
CID: 1248842
Reviewed by: grehan
