IPV6_IPSEC_POLICY always visible again. This unbreaks some
third party user space applications.
PR: 114491
Reported by: sumikawa
Reviewed by: sumikawa
Approved by: re (hrs)
should finally fix fsx test case.
The printf's added here would be eventually turned into
assertions.
Submitted by: Mingyan Guo (mostly)
Approved by: re (tmpfs blanket)
new code and third party modules which try to depend on it.
- Initialize sched_lock in sched_4bsd.c.
- Declare sched_lock in sparc64 pmap.c and assert that we're compiling
with SCHED_4BSD to prevent accidental crashes from running ULE. This
is the sole remaining file outside of the scheduler that uses the
global sched_lock.
Approved by: re
- Solaris' setgroups(2) doesn't change process' effective gid, so set it
explicitly.
- POSIX doesn't define O_NOFOLLOW. FreeBSD returns EMLINK when target is
a symbolic link, but Solaris returns ELOOP then.
- Solaris doesn't define O_SHLOCK and O_EXLOCK flags.
Approved by: re (rwatson)
been in development for over 6 months as SCHED_SMP.
- Implement one spin lock per thread-queue. Threads assigned to a
run-queue point to this lock via td_lock.
- Improve the facility for assigning threads to CPUs now that sched_lock
contention no longer dominates scheduling decisions on larger SMP
machines.
- Re-write idle time stealing in an attempt to make it less damaging to
general performance. This is still disabled by default. See
kern.sched.steal_idle.
- Call the long-term load balancer from a callout rather than sched_clock()
so there are no locks held. This is disabled by default. See
kern.sched.balance.
- Parameterize many scheduling decisions via sysctls. Try to document
these via sysctl descriptions.
- General structural and naming cleanups.
- Document each function with comments.
Tested by: current@ amd64, x86, UP, SMP.
Approved by: re
require fewer blocking loops.
- Don't use atomic ops with 4BSD or on UP.
- Only use the blocking loop if ULE is compiled in.
- Use the correct memory barrier.
Discussed with: attilio, jhb, ssouhlal
Tested by: current@
Approved by: re
FreeBSD 6.2, but it didn't make it into RELENG_6_2.
Update the manual page to say "FreeBSD 6.3".
PR: docs/114429
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
MFC after: 3 days
Approved by: re (bmah)
- use proper tick gathering macro instead of ticks directly.
- Placed reasonable boundaries on sets that a user can do
that are converted to ticks from ms.
- Fix CMT_PF to always check to be sure CMT is on.
- Fix ticks use of CMT_PF.
- put back code to allow asconfs to be queued while INITs are in flight
and before the assoc is established.
- During window probes, an ack'd packet might be left with the window
probe mark on it causing it to be retransmitted. Change so that
the flight decrease macro clears the window_probe mark.
- Additional logging flight size/reading and ASOC LOG. This
is only enabled if you manually insert things into opt_sctp.h
since its a set of debug code only.
- Found an interesting SMP race in the way data was appended which
could cause a reader to lose a part of a message, had to
reorder when we marked the message was complete to after
the data was appended.
- bug in ADD-IP for the subset bound socket case when the peer has only
one address
- fix ASCONF implicit success/error handling case
- proper support of jails in Freebsd 6>
- copy out the timeval for the 64 bit sparc world on cookie-echo
alignment error crashes without this).
Approved by: re(Ken Smith)
general, when support was added to netstat for fetching data using sysctl,
no provision was left for fetching equivalent data from a core dump, and
in fact, netstat would _always_ fetch data from the live kernel using
sysctl even when -M was specified resulting in the user believing they
were getting data from coredumps when they actually weren't. Some specific
changes:
- Add a global 'live' variable that is true if netstat is running against
the live kernel and false if -M has been specified.
- Stop abusing the sysctl flag in the protocol tables to hold the protocol
number. Instead, the protocol is now its own field in the tables, and
it is passed as a separate parameter to the PCB and stat routines rather
than overloading the KVM offset parameter.
- Don't run PCB or stats functions who don't have a namelist offset if we
are being run against a crash dump (!live).
- For the inet and unix PCB routines, we generate the same buffer from KVM
that the sysctl usually generates complete with the header and trailer.
- Don't run bpf stats for !live (before it would just silently always run
live).
- kread() no longer trashes memory when opening the buffer if there is an
error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX.
- The multicast routing code doesn't fallback to kvm on live kernels if
the sysctl fails. Keeping this made the code rather hairy, and netstat
is already tied to the kernel ABI anyway (even when using sysctl's since
things like xinpcb contain an inpcb) so any kernels this is run against
that have the multicast routing stuff should have the sysctls.
- Don't try to dig around in the kernel linker in the netgraph PCB routine
for core dumps.
Other notes:
- sctp's PCB routine only works on live kernels, it looked rather
complicated to generate all the same stuff via KVM. Someone can always
add it later if desired though.
- Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered.
- Use sysctlbyname() everywhere rather than hardcoded mib values.
MFC after: 1 week
Approved by: re (rwatson)
config info. from device.hints. Some machines have ipmi controllers
that do not have attachment info in either PCI, SMBIOS or ACPI.
This idea was hacked together by me and then done properly by
jhb.
Submitted by: jhb
Reviewed by: jhb (man page)
Approved by: re (Ken Smith)
MFC after: 1 week
The SDM states that writing to ar.bspstore invalidates the ar.rnat
register as a side-effect. This was interpreted as "bits in the
ar.rnat register that correspond to registers whose value is on
the stack are undefined'. Since we keep the kernel stack NaT-
aligned with the user stack (i.e. the lower 9 bits of the backing
store pointer remain unchanged when we switch to the kernel stack)
bits that need preserving would be preserved.
That interpretation is questionable. So, now, the interpretation
is more absolute: ar.rnat is undefined after writing to ar.bspstore.
As such, we write the saved value of ar.rnat back to ar.rnat after
writing to ar.bspstore.
Discussed with: christian.kandeler@hob.de
Approved by: re (kensmith)
itself. It needs mmap(2), which now needs getosreldate(3) and
which in turn uses a global variable to cache the result. This
cannot be done before linking is done.
See also: ../sparc64/reloc.c:1.15
Approved by: re (kensmith)
couldn't allocate more memory for a string. Change
this so it returns NULL in that case, and update
all of its callers to handle the error. Some of
those callers can now return errors back to the
client instead of calling exit(3).
Approved by: re (bmah)
- Keep last transaction label for each destination.
- If the next label is not free, just give up.
- This should reduce CPU load for TX on if_fwip under heavy load.
Approved by: re (hrs)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
vm_phys_free_pages(). Rename vm_phys_alloc_pages_locked() to
vm_phys_alloc_pages() and vm_phys_free_pages_locked() to
vm_phys_free_pages(). Add comments regarding the need for the free page
queues lock to be held by callers to these functions. No functional
changes.
Approved by: re (hrs)
if there was more than one. In particular, this simplifies
test_tar_filenames.c, which has a tendency to be very noisy otherwise.
Approved by: re (blanket, libarchive testing)
- CMT_PF states added (w/sysctl to turn the PF version on)
- sctp_input.c had a missing incr of cookie case when the
auth was bad. This meant a free was called without an
increment to refcnt, added increment like rest of code.
- There was a case, unlikely, when the scope of the destination
changed (this is a TSNH case). In that case, it would not free
the alloc'ed asoc (in sctp_input.c).
- When listed addresses found a colliding cookie/Init, then
the collided upon tcb was not unlocked in sctp_pcb.c
- Add error checking on arguments of sctp_sendx(3) to prevent it from
referencing a NULL pointer.
- Fix an error return of sctp_sendx(3), it was returing
ENOMEM not -1.
- Get assoc id was changed to use the sanctified socket api
method for getting a assoc id (PEER_ADDR_INFO instead of
PEER_ADDR_PARAMS).
- Fix it so a peeled off socket will get a proper error return
if it trys to send to a different address then it is connected to.
- Fix so that select_a_stream can avoid an endless loop that
could hang a caller.
- time_entered (state set time) was not being set in all cases
to the time we went established.
Approved by: re(ken smith)
This adds a function to agp.c to set the aperture resource ID if it's
not the usual AGP_APBASE. Previously, agp.c had been assuming
AGP_APBASE, which resulted in incorrect agp_info, and contortions by
agp_i810.c to work around it.
This also adds functions to agp.c for default AGP_GET_APERTURE() and
AGP_SET_APERTURE(), which return the aperture resource size and disallow
aperture size changes. Moving to these for our AGP drivers will likely
result in stability improvements. This should fix 855-class aperture
size detection.
Additionally, refuse to attach agp_i810 when some RAM is above 4GB and
the GART can't reference memory that high. This should be very rare.
The correct solution would be bus_dma conversion for agp, which is
beyond the scope of this change. Other AGP drivers could likely use
this change as well.
G33/Q35/Q33 AGP support is also included, but disconnected by default
due to lack of testing.
PR: kern/109724 (855 aperture issue)
Submitted by: FUJIMOTO Kou<fujimoto@j.dendai.ac.jp>
Approved by: re (hrs)
