to profile outoing packets for a number of mbuf chain
related parameters
e.g. number of mbufs, wasted space.
probably will do with further work later.
Reviewed by: various
This one line change makes the following code found in many ethernet device drivers
(at least em, igb, ixgbe, and cxgb) gratuitous
case SIOCSIFADDR:
if (ifa->ifa_addr->sa_family == AF_INET) {
/*
* XXX
* Since resetting hardware takes a very long time
* and results in link renegotiation we only
* initialize the hardware only when it is absolutely
* required.
*/
ifp->if_flags |= IFF_UP;
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
EM_CORE_LOCK(adapter);
em_init_locked(adapter);
EM_CORE_UNLOCK(adapter);
}
arp_ifinit(ifp, ifa);
} else
error = ether_ioctl(ifp, command, data);
break;
for all network interfaces, not just ethernet-like ones.
Upgrade it to a louder WARNING and be explicit that the flag is obsolete.
Support for IFF_NEEDSGIANT will be removed in a few months (see arch@ for
details) and will not appear in 8.0.
Upgrade if_watchdog to a WARNING.
2) Alter packet flow inside dummynet: allow certain packets to bypass
dummynet scheduler. Benefits are:
- lower latency: if packet flow does not exceed pipe bandwidth, packets
will not be (up to tick) delayed (due to dummynet's scheduler granularity).
- lower overhead: if packet avoids dummynet scheduler it shouldn't reenter ip
stack later. Such packets can be fastforwarded.
- recursion (which can lead to kernel stack exhaution) eliminated. This fix
long existed panic, which can be triggered this way:
kldload dummynet
sysctl net.inet.ip.fw.one_pass=0
ipfw pipe 1 config bw 0
for i in `jot 30`; do ipfw add 1 pipe 1 icmp from any to any; done
ping -c 1 localhost
3) Three new sysctl nodes are added:
net.inet.ip.dummynet.io_pkt - packets passed to dummynet
net.inet.ip.dummynet.io_pkt_fast - packets avoided dummynet scheduler
net.inet.ip.dummynet.io_pkt_drop - packets dropped by dummynet
P.S. Above comments are true only for layer 3 packets. Layer 2 packet flow
is not changed yet.
MFC after: 3 month
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
queue so the output network card must support the same tagging mechanism as
how the frame was input (prepended Ethernet header tag or stripped HW mflag).
Now the vlan Ethernet header is _always_ stripped in ether_input and the mbuf
flagged, only only network cards with VLAN_HWTAGGING enabled would properly
re-tag any outgoing vlan frames.
If the outgoing interface does not support hardware tagging then readd the vlan
header to the front of the frame. Move the common vlan encapsulation in to
ether_vlanencap().
Reported by: Erik Osterholm, Jon Otterholm
MFC after: 1 week
framework for non-MPSAFE network protocols:
- Remove debug_mpsafenet variable, sysctl, and tunable.
- Remove NET_NEEDS_GIANT() and associate SYSINITSs used by it to force
debug.mpsafenet=0 if non-MPSAFE protocols are compiled into the kernel.
- Remove logic to automatically flag interrupt handlers as non-MPSAFE if
debug.mpsafenet is set for an INTR_TYPE_NET handler.
- Remove logic to automatically flag netisr handlers as non-MPSAFE if
debug.mpsafenet is set.
- Remove references in a few subsystems, including NFS and Cronyx drivers,
which keyed off debug_mpsafenet to determine various aspects of their own
locking behavior.
- Convert NET_LOCK_GIANT(), NET_UNLOCK_GIANT(), and NET_ASSERT_GIANT into
no-op's, as their entire behavior was determined by the value in
debug_mpsafenet.
- Alias NET_CALLOUT_MPSAFE to CALLOUT_MPSAFE.
Many remaining references to NET_.*_GIANT() and NET_CALLOUT_MPSAFE are still
present in subsystems, and will be removed in followup commits.
Reviewed by: bz, jhb
Approved by: re (kensmith)
as to the type of the command argument: int -> u_long.
These types have different widths in the 64-bit world.
Add a note to UPDATING because the change breaks KBI
on 64-bit platforms.
Discussed on: -net, -current
Reviewed by: bms, ru
The name trunk is misused as the networking term trunk means carrying multiple
VLANs over a single connection. The IEEE standard for link aggregation (802.3
section 3) does not talk about 'trunk' at all while it is used throughout IEEE
802.1Q in describing vlans.
The lagg(4) driver provides link aggregation, failover and fault tolerance.
Discussed on: current@
tolerance. This driver allows aggregation of multiple network interfaces as
one virtual interface using a number of different protocols/algorithms.
failover - Sends traffic through the secondary port if the master becomes
inactive.
fec - Supports Cisco Fast EtherChannel.
lacp - Supports the IEEE 802.3ad Link Aggregation Control Protocol
(LACP) and the Marker Protocol.
loadbalance - Static loadbalancing using an outgoing hash.
roundrobin - Distributes outgoing traffic using a round-robin scheduler
through all active ports.
This code was obtained from OpenBSD and this also includes 802.3ad LACP support
from agr(4) in NetBSD.
Main points of this change:
* Drop frames immediately if the interface is not marked IFF_UP.
* Always trim off the frame checksum if present.
* Always use M_VLANTAG in preference to passing 802.1Q frames
to consumers.
* Use __func__ consistently for KASSERT().
* Use the M_PROMISC flag to detect situations where ether_input()
may reenter itself on the same call graph with the same mbuf which
was promiscuously received on behalf of subsystems such as
netgraph, carp, and vlan.
* 802.1P frames (that is, VLAN frames with an ID of 0) will now be
passed to layer 3 input paths.
* Deal with the special case for CARP in a sane way.
This is a significant rewrite of code on the critical path. Please report
any issues to me if they arise. Frames will now only pass through dummynet
if M_PROMISC is cleared, to avoid problems with re-entry.
The handling of CARP needs to be revisited architecturally. The M_PROMISC
flag may potentially be demoted to a link-layer flag only as it is in
NetBSD, where the idea originated.
Discussed on: net
Idea from: NetBSD
Reviewed by: yar
MFC after: 1 month
incoming packets have had their 802.1Q tags processed by the
hardware, resulting in them being stripped from the packets, and
placed on the mbuf. This fixes the processing of 802.1Q tags when
hardware offload of 802.1Q tags is enabled.
Add a pointer to the relevant PR for future reference. The whole comment
will be OK to remove as soon as the general solution is applied.
PR: kern/105943
The symptoms were that outgoing DHCP requests for diskless kernels
had the IP header corrupt. After long investigations, the source of
the problem was found in ether_output() - for SIMPLEX interfaces
and broadcast traffic, a copy of the packet is passed back to the kernel
through if_simloop(). However if_simloop() modifies the mbuf, while
the copy obtained through m_copym() is a readonly one.
The bug has been there forever, but it has been triggered only recently
by a change in sosend_dgram() which passed down mbufs with sufficient
space to prepend the header.
This fix is trivial - use m_dup() instead of m_copy() to create
the copy. As an alternative, we could try and modify if_simloop()
to play safely with readonly mbufs, but i don't think it is worthwhile
because 1) this is a relatively infrequent code path so we do not need
to worry too much about performance, and 2) the cost of doing an
extra m_pullup in if_simloop() is probably the same as doing the
copy of the cluster, anyways.
MFC after: 1 week
processing are forced to toggle this functionality when the card
is put in and out of promiscuous mode. The main reason for this
is because the hardware strips the VLAN tag, making it impossible
for the tag information to show up in network diagnostic tools like
tcpdump(1).
This change introduces ether_vlan_mtap(), which is called if the
mbuf has M_VLANTAG set. VLAN information is extracted from the
mbuf and inserted into a stack allocated ether vlan header which
is then inserted through the bpf machinery via bpf_mtap2(). The
original mbuf's data pointer and lengths are temporarily adjusted
to eliminate the original Ethernet header for the duration of the
tap operation. This should have no long term effects on the mbuf.
Also, define a new macro, ETHER_BPF_MTAP which should be used
by drivers which support hardware offload of VLAN tag processing.
The fixes for the relevant drivers will follow shortly.
Discussed with: rwatson, andre, jhb (and others)
Much feedback from: sam, ru
MFC after: 1 month [1]
[1] The version that is eventually MFCed will be somewhat
different then this, as there has been significant work
done to the VLAN code in HEAD.
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
re-organizing the monitor return logic. We perform interface monitoring
checks after we have determined if the CRC is still on the packet, if
it is, m_adj() is called which will adjust the packet length. This
ensures that we are not including CRC lengths in the byte counters for
each packet.
Discussed with: andre, glebius
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.
The most important changes:
o Instead of global linked list of all vlan softc use a per-trunk
hash. The size of hash is dynamically adjusted, depending on
number of entries. This changes struct ifnet, replacing counter
of vlans with a pointer to trunk structure. This change is an
improvement for setups with big number of VLANs, several interfaces
and several CPUs. It is a small regression for a setup with a single
VLAN interface.
An alternative to dynamic hash is a per-trunk static array with
4096 entries, which is a compile time option - VLAN_ARRAY. In my
experiments the array is not an improvement, probably because such
a big trunk structure doesn't fit into CPU cache.
o Introduce an UMA zone for VLAN tags. Since drivers depend on it,
the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
This change is a big improvement for any setup utilizing vlan(4).
o Use rwlock(9) instead of mutex(9) for locking. We are the first
ones to do this! :)
o Some drivers can do hardware VLAN tagging + hardware checksum
offloading. Add an infrastructure for this. Whenever vlan(4) is
attached to a parent or parent configuration is changed, the flags
on vlan(4) interface are updated.
In collaboration with: yar, thompsa
In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
may have changed by m_pullup() during fastforward processing.
While this is a bug it is actually never triggered in real world
situations and it is not remotely exploitable.
Found by: Coverity Prevent(tm)
Coverity ID: CID780
Sponsored by: TCP/IP Optimization Fundraise 2005
span ports when they disappear. The span port does not have a pointer to the
softc so revert r1.31 and bring back the softc linked-list.
MFC after: 2 weeks
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
copy of Ethernet address.
- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.
- move the function pointer definitions to if_bridgevar.h
- move most of the logic to the new BRIDGE_INPUT and BRIDGE_OUTPUT macros
- remove unneeded functions from if_bridgevar.h and sort a little.
Use bridge_ifdetach() to notify the bridge that a member has been detached. The
bridge can then remove it from its interface list and not try to send out via a
dead pointer.
http://lists.freebsd.org/pipermail/cvs-src/2004-October/033496.html
The same problem applies to if_bridge(4), too.
- Copy-and-paste the if_bridge(4) related block from
if_ethersubr.c to ng_ether.c
- Add XXXs, so that copy-and-paste would be noticed by
any future editors of this code.
- Also add XXXs near if_bridge(4) declarations.
Silence from: thompsa
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
assigned to the interface.
IPv6 auto-configuration is disabled. An IPv6 link-local address has a
link-local scope within one link, the spec is unclear for the bridge case and
it may cause scope violation.
An address can be assigned in the usual way;
ifconfig bridge0 inet6 xxxx:...
Tested by: bmah
Reviewed by: ume (netinet6)
Approved by: mlaier (mentor)
MFC after: 1 week
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
ifp->if_resolvemulti(), do so with M_NOWAIT rather than M_WAITOK, so
that a mutex can be held over the call. In the FDDI code, add a
missing M_ZERO. Consumers are already aware that if_resolvemulti()
can fail.
MFC after: 1 week
