update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
r272959 broke compatibility with mfsBSD that stores the default network
config file in /etc/rc.conf.d/network. In order to fix that load the network
config file from netif also.
This change implements a notification (via devctl) to userland when
the kernel produces coredumps after a process has crashed.
devd can then run a specific command to produce a human readable crash
report. The command is most usually a helper that runs gdb/lldb
commands on the file/coredump pair. It's possible to use this
functionality for implementing automatic generation of crash reports.
devd(8) will be notified of the full path of the binary that crashed and
the full path of the coredump file.
This was a discrepancy between ^/projects/building-blocks and ^/head that I
didn't resolve before committing the change to ^/head
Pointyhat to: me
Reported by: jhb
MFC after: 20 days
X-MFC with: r278249
Sponsored by: EMC / Isilon Storage Division
build/install without disrupting other dependent services (see r278249, et
al):
- MK_LOCATE
- MK_MAN
- MK_NLS
- MK_OPENSSL
- MK_PKGBOOTSTRAP
- MK_SENDMAIL
Additional flags need to be handled in etc/Makefile, but it requires
refactoring the relevant scripts in etc/rc.d/*
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
and IPv6 rules in a single table. ipf -6 -Fa will flush the whole table,
including IPv4 rules. This patch removes the redundant ipf -I -6 -Fa
statement.
PR: 188318
MFC after: 2 weeks
https://wiki.freebsd.org/ReproducibleBuilds
The contrib/sendmail change will be made in the upstream source for a
future sendmail release.
Reviewed by: des
MFC after: 3 days
It tests that all FIBs get a static IPv6 loopback route.
Submitted by: asomers
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1048456 on 2014/03/13
1114523 on 2015/01/23
Up to 7 archives of the log will be kept (just for consistency with the other
log rotation rules)
PR: 196788
MFC after: 1 week
Reviewed by: hselasky
Sponsored by: EMC / Isilon Storage Division
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
periodic(8) run, taken from uname(1) '-U' and '-K'
flags.
Reviewed by: allanjude, dvl
Differential Revision: https://reviews.freebsd.org/D1541
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
contains the libraries for Address Sanitizer (asan), Undefined Behavior
Sanitizer (ubsan) and Profile Guided Optimization.
ASan is a fast memory error detector. It can detect the following types
of bugs:
Out-of-bounds accesses to heap, stack and globals
Use-after-free
Use-after-return (to some extent)
Double-free, invalid free
Memory leaks (experimental)
Typical slowdown introduced by AddressSanitizer is 2x.
UBSan is a fast and compatible undefined behavior checker. It enables a
number of undefined behavior checks that have small runtime cost and no
impact on address space layout or ABI.
PLEASE NOTE: the sanitizers still have some rough edges on FreeBSD,
particularly on i386. These will hopefully be smoothed out in the
coming time.
Differential Revision: https://reviews.freebsd.org/D1505
- Fix depend target by removing a space after an "-I" inclusion option.
- Fix some minor compile issues in the "osmtest" utility.
MFC after: 3 days
PR: 196580
Sponsored by: Mellanox Technologies
The SAMPLE message and notes where tab seperated for some parts and hence
displayed incorrectly unless tabstop was set to 8. Switch to spaces to it
displays correctly independent of the tabstop setting.
Sponsored by: Multiplay
The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
MFC after: 2 weeks
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
drives or flash keys. It can be enabled by uncommenting a single entry
in default /etc/auto_master. It can also be easily modified to use
fuse-based filesystems instead of in-kernel ones.
There is still one deficiency - the mountpoints are permanent, they
don't disappear when user removes the media. Fixing it needs some
autofs changes.
Differential Revision: https://reviews.freebsd.org/D1210
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
service does not run in jails, it was necessary to change it to something
else when jailed, and NETWORKING was arbitrarily chosen. The divider was
later moved to FILESYSTEMS when it was introduced, but the logic to change
it to NETWORKING when jailed remained. Remove it, as it no longer serves
any purpose.
PR: 194975
MFC after: 1 week
mrouted has been available in ports for the last 8 years as net/mrouted . An
equivalent rc.d script has been present in the port.
Remove all corresponding variables from etc/defaults/rc.conf
Relnotes: yes
- FreeBSD hasn't packaged X11 with the distro since 8.x
- X.org hasn't required xorg.conf [in /etc/X11] for some time now
- X.org should work with ${LOCALBASE}/etc/X11
- This path should be included in the X.org package manifest
- bootparamd
- bootpd
- finger/fingerd
- ftp/ftpd
- hastctl/hastd
- iscsid, et al
- rbootd
- talk/talkd
- tcpd, et al
- tftp/tftpd
Add src.conf entries for the various components and do a best effort
at adding components to tools/build/mk/OptionalObsoleteFiles.inc
