The following repo-copies were made (by Mark Murray):
sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c
sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h
share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
copy of Ethernet address.
- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.
causes them to be recreated (if needed) early, when doing "make
depend" here, before generating headers that depend on them.
This should fix breakages often seen while doing incremental
(NO_CLEAN) cross-builds.
Introduce /etc/rc.d/bluetooth script to start/stop Bluetooth devices. It
will be called from devd(8) in response to device arrival/departure events.
It is also possible to call it by hand to start/stop particular device
without unplugging it.
Introduce generic way to set configuration parameters for Bluetooth devices.
By default /etc/rc.d/bluetooth script has hardwired defaults compatible
with old rc.bluetooth from /usr/share/netgraph/bluetooth/examples. These
can be overridden using /etc/defaults/bluetooth.device.conf file (system
wide defaults). Finally, there could be another device specific override
file located in /etc/bluetooth/$device.conf (where $device is ubt0, btccc0
etc.)
The list of configuration parameters and their meaning described in the
/etc/defaults/bluetooth.device.conf file. Even though Bluetooth device
configuration files are not shell scripts, they must follow basic sh(1) syntax.
The bluetooth.device.conf(5) and handbook update will follow shortly.
Inspired by: Panagiotis Astithas ( past at ebs dot gr )
Reviewed by: brooks, yar
MFC after: 1 week
polynomial for __kernel_tanf(). The old one was the double-precision
polynomial with coefficients truncated to float. Truncation is not
a good way to convert minimax polynomials to lower precision. Optimize
for efficiency and use the lowest-degree polynomial that gives a
relative error of less than 1 ulp. It has degree 13 instead of 27,
and happens to be 2.5 times more accurate (in infinite precision) than
the old polynomial (the maximum error is 0.017 ulps instead of 0.041
ulps).
Unlike for cosf and sinf, the old accuracy was close to being inadequate
-- the polynomial for double precision has a max error of 0.014 ulps
and nearly this small an error is needed. The new accuracy is also a
bit small, but exhaustive checking shows that even the old accuracy
was enough. The increased accuracy reduces the maximum relative error
in the final result on amd64 -O1 from 0.9588 ulps to 0.9044 ulps.
socket file descriptor garbage collection code, which is intended to
detect and clear cycles of orphaned file descriptors that are "in-flight"
in a socket when that socket is closed before they are received. The
algorithm present was both run at poor times (resulting in recursion and
reentrance), and also buggy in the presence of parallelism. In order to
fix these problems, make the following changes:
- When there are in-flight sockets and a UNIX domain socket is destroyed,
asynchronously schedule the garbage collector, rather than running it
synchronously in the current context. This avoids lock order issues
when the garbage collection code reenters the UNIX domain socket code,
avoiding lock order reversals, deadlocks, etc. Run the code
asynchronously in a task queue.
- In the garbage collector, when skipping file descriptors that have
entered a closing state (i.e., have f_count == 0), re-test the FDEFER
flag, and decrement unp_defer. As file descriptors can now transition
to a closed state, while the garbage collector is running, it is no
longer the case that unp_defer will remain an accurate count of
deferred sockets in the mark portion of the GC algorithm. Otherwise,
the garbage collector will loop waiting waiting for unp_defer to reach
zero, which it will never do as it is skipping file descriptors that
were marked in an earlier pass, but now closed.
- Acquire the UNIX domain socket subsystem lock in unp_discard() when
modifying the unp_rights counter, or a read/write race is risked with
other threads also manipulating the counter.
While here:
- Remove #if 0'd code regarding acquiring the socket buffer sleep lock in
the garbage collector, this is not required as we are able to use the
socket buffer receive lock to protect scanning the receive buffer for
in-flight file descriptors on the socket buffer.
- Annotate that the description of the garbage collector implementation
is increasingly inaccurate and needs to be updated.
- Add counters of the number of deferred garbage collections and recycled
file descriptors. This will be removed and is here temporarily for
debugging purposes.
With these changes in place, the unp_passfd regression test now appears
to be passed consistently on UP and SMP systems for extended runs,
whereas before it hung quickly or panicked, depending on which bug was
triggered.
Reported by: Philip Kizer <pckizer at nostrum dot com>
MFC after: 2 weeks
Use . instead of ${.OBJDIR}.
Move DEFSDIR and BMIBSDIR under the resp. .if clauses so that they
get defined only if DEFS and BMIBS are defined.
Submitted by: ru
state about each open file, and identify the first process in the process
table that references the file. This is helpful in debugging leaks of
file descriptors.
MFC after: 1 week
> > There is no need to explicitly add "status" to $extra_commands in
> > the /etc/rc.d/pf script as it is implicitly added by /etc/rc.subr's
> > run_rc_command() because of the existing $pf_program.
> >
> > Submitted by: Christoph Schug <chris@schug.net>
...because as yar@ points out: "[...] you were relying on evil
side-effects of the variable being named *_program. hose side-effect
have been eliminated since rc.subr rev. 1.42. [...] The point is that
the default "status" method is for rc.d scripts that handle startup and
shutdown of conventional daemons, and not for custom tasks like the pf
case."
The change is still valid in RELENG_6 (and still doesn't have to be
backed out) as long as rc.subr:r1.42 is not MFC'ed to RELENG_6, too.
into the contrib directory are still necessary for some of the Makefiles,
because the C-sources there use non-canonical includes ("" includes) to get
at the header files.
use in-tree as well as for 3rd party modules. This file is more or less
what was in usr.sbin/bsnmpd/modules/Makefile.inc with some modifications
and omissions. Usage examples can be found under usr.sbin/bsnmpd/modules/*.
Idea by: phk
The PR and patch have the details. The ultimate fix requires architectural
changes and clarifications to the VFS API, but this will prevent the system
from panicking when someone does "ls /dev" while running in a shell under the
linuxulator.
This issue affects HEAD and RELENG_6 only.
PR: 88249
Submitted by: "Devon H. O'Dell" <dodell@ixsystems.com>
MFC after: 3 days
with the file descriptor. When a file descriptor is closed as a result
of garbage collecting a UNIX domain socket, the file descriptor will
not have any associated thread, so the logic to identify advisory locks
held by that thread is not appropriate. Check the thread for NULL to
avoid this scenario. Expand an existing comment to say a bit more about
this.
MFC after: 1 week
thread context. While it doesn't matter too much at the moment, in
the future we could be back in the same boat if/when more restrictions
are placed (or enforced) in a SWI.
Suggested by: njl, bde, jhb, scottl
overruns and number of watchdog timeouts.
- Do not log(9) RX overrun events, since this pessimizes
things under load [1].
- Do not increase if->if_oerrors in em_watchdog(), since
this leads to counter slipping back, when if->if_oerrors
is recalculated in em_update_stats_counters(). Instead
increase watchdog counter in em_watchdog() and take it
into account in em_update_stats_counters().
Submitted by: ade [1]
