1054 Commits

Author SHA1 Message Date
remko
0b350b7aac Detect ATA controllers in the Macbook3.
PR:		118135
Submitted by:	ed
Approved by:	imp (mentor, implicit)
MFC after:	1 week
2008-07-10 21:36:53 +00:00
remko
c490da6d26 Driver failed to allocate MMIO resources. Attached patch adds a fallback path.
It uses generic IDE facilities if sii-specific allocations failed

PR:		125421
Submitted by:	Andrey V. Elsukov <bu7cher at yandex dot ru>
Approved by:	imp (mentor, implicit)
MFC after:	1 week
2008-07-09 15:10:53 +00:00
remko
3787712497 Add new device id for ICH8M, which supports greater than UDMA33 mode
when it worked as generic IDE.

PR:			125422
Submitted by:		Andrey V. Elsukov <bu7cher at yandex dot ru>
Approved by:		imp (mentor, implicit)
MFC after:		1 week
2008-07-09 15:07:53 +00:00
remko
7e3a416f52 Add support for the ICH9 in non AHCI mode (RAID mode).
Submitted by:	Andrey V. Elsukov <bu7cher at yandex dot ru>
Tested by:	Vitalij L. Fadeev <fvl at mail dot ru>
Approved by:	imp (mentor, implicit)
MFC after:	1 week
2008-07-09 15:06:41 +00:00
sos
622e89669b Wait up to 1S for the TFD data to signal un-busy before fetching the signature.
This at least helps a few slow devices out there.

Submitted by:	Andrey V. Elsukov
2008-06-11 08:48:25 +00:00
sos
6fdb33f67f Rearrange how to call dma.alloc() so that we have resources alloc'd when need but also late enough to know how many to create. 2008-06-11 06:44:58 +00:00
sos
449e5df4dc Dont call ata_start() when ata_reinit fails in the ioctl path. 2008-05-26 08:58:48 +00:00
grehan
1bdc8efe15 Fix panic and breakage for non-DMA ATA devices e.g. powermac macio cells.
Handle cases where dma function pointers may be NULL, and where
the max_iosize can't be derived from a DMA data structure. For
the latter, revert to the prior behaviour of using DFLTPHYS for
the max i/o size when there is no other data.

Reviewed by:		marcel
No objection by:	sos
2008-05-08 17:55:44 +00:00
sos
ca37ae1f06 Add HW level support for the Adaptec 1420SA controller. 2008-04-21 10:51:38 +00:00
sos
49fded62ac Unload DMA slot on device timeouts. 2008-04-21 10:35:19 +00:00
sos
78988be519 Do not enable FIS based PM switching, even if not used some controllers barf. 2008-04-21 10:34:31 +00:00
bz
24c28f2576 devclass_get_maxunit() returns n+1 with n starting at 0.
So if we have channel 0..3  devclass_get_maxunit is 4.

It's never been a problem as devclass_get_device() has
catched a possibly bad input.

Discussed with:	scottl
2008-04-20 17:45:32 +00:00
sos
9ecfa6893d Fix the breakage that caused AHCI devices to vanish. Editor droppings :(
Put the ATAPI device numbering back to the old ways.
2008-04-18 15:15:04 +00:00
sos
a318b86b07 Alloc two DMA slots pr default, silly me forgot that slaves still exists. 2008-04-17 18:11:47 +00:00
sos
b11f9dd52a Go back to preallocating everything possible on init.
This avoids calling busdma in the request processing path which caused a traumatic performance degradation.
Allocation has be postponed to after we know how many devices we possible can have on portmulitpliers to save some space.
2008-04-17 12:29:35 +00:00
sos
48d8d5e84e Fix problem with slave devices.
Fix or rather bring ENOMEM problems back to the state it was before.
Temporarily disable PortMultipliers on AHCI devices.
2008-04-14 18:34:24 +00:00
sos
a3d2be176f Fix identify of slave devices. 2008-04-13 16:05:34 +00:00
sos
c7e894e8b0 Dont call hw.status recursively.
Spotted by: Marcel Moolenaar
2008-04-12 17:21:22 +00:00
sos
f08ca2fe36 Fix badly placed '{'
Dont leak requests on busdma failure (not that we'd get anywhere anyhow).

Reported by: antoine@
2008-04-11 22:56:27 +00:00
sos
e7012ad330 Fix the brokenness in the former commit, sorry for the mess.
The problem is that the PM support is part of a much larger WIP here, but due to popular demand I decided to get some of it imported.

Also I forgot the mention:

HW sponsored by: Vitsch Electronics / VEHosting
2008-04-11 11:30:27 +00:00
sos
071467d40e Fix clearing of nVidia interrupts. 2008-04-10 20:40:25 +00:00
sos
34ad230814 Add experimental support for SATA Port Multipliers
Support is working on the Silicon Image SiI3124/3132.
Support is working on some AHCI chips but far from all.

Remember this is WIP, so test reports and (constructive) suggestions are welcome!
2008-04-10 13:05:05 +00:00
sos
f997b9d36a Unbreak the last commit.
Changes from the PM WIP sneaked in and caused compile errors.
2008-03-20 21:21:31 +00:00
sos
c69ad0290e Fix Problem with Intel Matrix RAID.
Fix from PR/121899.
2008-03-20 11:54:26 +00:00
phk
916647a52a Add a "spindown" facility to ata-disks: If no requests have been received
for a configurable number of seconds, spin the disk down.  Spin it back
up on the next request.

Notice that the timeout is only armed by a request, so to spin down a
disk you may have to do:

	atacontrol spindown ad10 5
	dd if=/dev/ad10 of=/dev/null count=1

To disable spindown, set timeout to zero:

	atacontrol spindown ad10 0

In order to debug any trouble caused, this code is somewhat noisy on the
console.

Enabling spindown on a disk containing / or /var/log/messages is not
going to do anything sensible.

Spinning a disk up and down all the time will wear it out, use sensibly.

Approved by:	sos
2008-03-17 10:33:23 +00:00
sos
80685d23d6 Add proper support for the SATA/AHCI part of IXP[67]00 2008-03-07 09:29:19 +00:00
phk
34e034ebc6 If the disk reports that it support the Compact Flash Association command
set, announce BIO_DELETE capability and issue ATA_CFA_ERASE when we get one.

Once we issue more BIO_DELETE, this will improve lifetime, and
possibly write speed of Flash based devices which have usable flash
adaptation layers.

For now, about the only usage is the newfs(1) -E flag.

Approved by:	sos
2008-01-02 20:33:54 +00:00
phk
340db3aed4 Follow the current fashion of gratuitously stomping into other
peoples code with irrelevant changes[1]:

Use bus_{read|write_*() instead of bus_space_{read|write}_*() for
purely stylistic reasons.

Due to compiler optimizations and inlining, this is for all practical
purposes without effect in the compiled code.

[1] NB: Approved by:	sos
2008-01-02 20:31:14 +00:00
sos
cd8dd509e5 Implement a workaround of the datacorruption problem on serverworks HT1000 chipsets.
The HT1000 DMA engine seems to not always like 64K transfers and sometimes barfs data all over memory leading to instant chrash and burn.
Also fix 48bit adressing issues, apparently newer chips needs 16bit writes and not the usual fifo thing.

HW donated by: Travis Mikalson at TerraNovaNet
2007-12-13 11:47:36 +00:00
sos
9bc486376b Fix speed report on Intel SATA chips in compat mode.
Fix broken detect of JMicron 368.
2007-12-07 13:14:31 +00:00
sos
1727174689 Use device_set_desc_copy in the generic ident as its used on a temp buffer. 2007-11-26 19:08:08 +00:00
sos
9d7c423748 Add preliminary SATA ATAPI support for sii 3132/3124 chips. 2007-11-23 08:17:14 +00:00
kevlo
1fc52ebb1e Fix KASSERT messages. 2007-11-20 04:52:19 +00:00
sos
2350167451 Dont fumble the ivars on reinit, avoids panic on suspend/resume om some systems that looses thier devices.
Patch by: jhb@
2007-11-19 21:11:26 +00:00
sos
d1d1db8b70 Try to workaound silicon bugs in Promise gen2 (ie TX4) chips
Initial patch by Alexander Sabourenkov who found it in Promise's own driver.

Further fixes and sanity checks by yours truely.
2007-11-19 20:47:31 +00:00
sos
24ced90f97 Fix the problem with certain ATAPI commands on AHCI devices.
Revert the probe in atapi-cd.c to the old usage now its fixed on AHCI.
THis change also fixes using virtual CD's om fx parallels.

Still leaves the GEOM problem of telling media vs device access apart in the access function.
2007-11-19 18:05:48 +00:00
sos
0422421099 Add generic support for chipsets that say they support AHCI. This should catch new chipsets that we dont know but that we should support.
Add a few new PCI id's.
Misc cleanups.
2007-11-18 14:44:52 +00:00
sos
4e65ee2c1d Fix the signature matching code on AHCI controllers.
Add SATA ATAPI support for AHCI controllers.
2007-10-26 09:01:06 +00:00
sos
8a3367a3b4 Update the way we get the mode pages on probe. 2007-10-26 08:59:23 +00:00
sos
07eb0a925e Fix treating some modern chips (mem mapped) as legacy devices. 2007-10-26 08:57:08 +00:00
delphij
afb9b9ad44 Add PCI ID for ICH9 AHCI w/ two adapters.
Tested by:	Abdullah Ibn Hamad Al-Marri <almarrie gmail com>
Approved by:	sos
Approved by:	re (kensmith)
2007-10-09 20:15:09 +00:00
sos
4a797d19e2 Add support for the VIA 8237S
Fix the LBA28/LBA48 crossover bug.

Approved by: re@
2007-10-04 19:17:16 +00:00
phk
dc63751776 Recognize the CS5536 support chip for the AMD Geode LX CPU to enable
UDMA modes.

Please notice that Soekris NET5501 bios versions before 1.32f has a bug
that prevents this from working.

Approved by:	re (gnn)
MFC:		2 weeks
2007-10-04 06:21:54 +00:00
simon
afe3e15299 Add PCI IDs for Intel ICH9.
PR:		kern/114473
Submitted by:	Michael Fuckner <michael@fuckner.net>
MFC after:	2 weeks
OK'ed by:	sos
Approved by:	re (bmah)
2007-09-10 19:16:39 +00:00
jhb
47d488244c Expand the data structure returned by the ATA RAID status ioctl to include
detailed status on each of the backing subdisks.  This allows userland
to see which subdisks are online, failed, missing, or a hot spare.

MFC after:	1 week
Approved by:	re (bmah)
Reviewed by:	sos
2007-08-13 18:46:31 +00:00
remko
62b8a82dc4 Add Viking Interworks 256MB as an ata device; this might give
some false positives but at this moment it is better to add
support then to dont have it at all (comment from Soren).

PR:		kern/111516
Submitted by:	Thomas Nystrom <thn at saeab dot se>
Approved by:	re (kensmith)
Approved by:	imp (mentor)
OK'ed by:	sos (With the comment noted above about false
		positives).
2007-06-26 22:13:43 +00:00
sos
89f565f779 Add support for the nVidia MCP61 series chipset.
Approved by: re (mux@)
2007-06-25 08:21:21 +00:00
imp
fc8857ae2a Include usb_port.h
Approved by: re@ (blanket and/or cleanup commit approval)
2007-06-23 21:52:05 +00:00
scottl
ff584e70fa Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
bms
9156605d19 Do not attempt to enable AHCI mode on ALi SATA controllers other
than the 5288.

It is not correctly implemented in earlier silicon, and the BIOS often
lies about AHCI capability on platforms where these chips are deployed.
With this change I am able to boot FreeBSD on the ASUS Vintage AH-1
barebones system.

Approved by:	sos
2007-06-13 17:44:49 +00:00