Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
I was investigating libarchive test failures on CheriBSD and it turns out
we get a reproducible SIGBUS for test_archive_m5, etc. Debugging this shows
that libarchive and the tests disagree when it comes to the definition of
archive_md5_ctx: libarchive assumes it's the OpenSSL type whereas the test
use the libmd type. The latter is not necessarily aligned enough to store
a pointer (16 bytes for CHERI RISC-V), so we were crashing when storing
EVP_MD_CTX* to an 8-byte-aligned archive_md5_ctx.
To avoid problems like this in the future, factor out the common compiler
flags into a Makefile.inc and include that from the tests Makefile.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D26469
Note that old pkg will failed to build after this. A recent ports tree (one
providing pkg 1.12+) is required to build. Older already built pkg, should
continue working as expected
PR: 238797
Exp run by: antoine
Reviewed by: cem
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20752
Sync libarchive with vendor.
Relevant vendor changes:
Issue #795: XAR - do not try to add xattrs without an allocated name
PR #812: non-recursive option for extract and list
PR #958: support reading metadata from compressed files
PR #999: add --exclude-vcs option to bsdtar
Issue #1062: treat empty archives with a GNU volume header as valid
PR #1074: Handle ZIP files with trailing 0s in the extra fields
(Android APK archives)
PR #1109: Ignore padding in Zip extra field data (Android APK archives)
PR #1167: fix problems related to unreadable directories
Issue #1168: fix handling of strtol() and strtoul()
PR #1172: RAR5 - fix invalid window buffer read in E8E9 filter
PR #1174: ZIP reader - fix of MSZIP signature parsing
PR #1175: gzip filter - fix reading files larger than 4GB from memory
PR #1177: gzip filter - fix memory leak with repeated header reads
PR #1180: ZIP reader - add support for Info-ZIP Unicode Path Extra Field
PR #1181: RAR5 - fix merge_block() recursion
(OSS-Fuzz 12999, 13029, 13144, 13478, 13490)
PR #1183: fix memory leak when decompressing ZIP files with LZMA
PR #1184: fix RAR5 OSS-Fuzz issues 12466, 14490, 14491, 12817
OSS-Fuzz 12466: RAR5 - fix buffer overflow when parsing huffman tables
OSS-Fuzz 14490, 14491: RAR5 - fix bad shift-left operations
OSS-Fuzz 12817: RAR5 - handle a case with truncated huffman tables
PR #1186: RAR5 - fix invalid type used for dictionary size mask
(OSS-Fuzz 14537)
PR #1187: RAR5 - fix integer overflow (OSS-Fuzz 14555)
PR #1190: RAR5 - RAR5 don't try to unpack entries marked as directories
(OSS-Fuzz 14574)
PR #1196: RAR5 - fix a potential SIGSEGV on 32-bit builds
OSS-Fuzz 2582: RAR - fix use after free if there is an invalid entry
OSS-Fuzz 14331: RAR5 - fix maximum owner name length
OSS-Fuzz 13965: RAR5 - use unsigned int for volume number + range check
Additional RAR5 reader changes:
- support symlinks, hardlinks, file owner, file group, versioned files
- change ARCHIVE_FORMAT_RAR_V5 to 0x100000
- set correct mode for readonly directories
- support readonly, hidden and system Windows file attributes
MFC after: 2 weeks
Sync libarchive with vendor.
Relevant vendor changes:
PR #1085: Fix a null pointer dereference bug in zip writer
PR #1110: ZIP reader added support for XZ, LZMA, PPMD8 and BZIP2
decopmpression
PR #1116: Add support for 64-bit ar format
PR #1120: Fix a 7zip crash [1] and a ISO9660 infinite loop [2]
PR #1125: RAR5 reader - fix an invalid read and a memory leak
PR #1131: POSIX reader - do not fail when tree_current_lstat() fails
due to ENOENT [3]
PR #1134: Delete unnecessary null pointer checks before calls of free()
OSS-Fuzz 10843: Force intermediate to uint64_t to make UBSAN happy.
OSS-Fuzz 11011: Avoid buffer overflow in rar5 reader
PR: 233006 [3]
Security: CVE-2019-1000019 [1], CVE-2019-1000020 [2]
MFC after: 2 weeks
- breaks ports-mgmt/pkg build for mips64, powerpc64 and i386 for some users.
--- pkg-static ---
/usr/lib/liblzma.a(stream_encoder_mt.o): In function `mythread_cond_init':
/usr/local/poudriere/jails/ppc64/usr/src/contrib/xz/src/common/mythread.h:230:
undefined reference to `pthread_condattr_init'
Reported by: jhibbits zeising
Sync libarchive with vendor
Relevant vendor changes:
PR #1013: Add missing h_base offset when performing absolute seeks in
xar decompression
PR #1061: Add support for extraction of RAR v5 archives
PR #1066: Fix out of bounds read on empty string filename for gnutar, pax
and v7tar
PR #1067: Fix temporary file path buffer overflow in tests
IS #1068: Correctly process and verify integer arguments passed to
bsdcpio and bsdtar
PR #1070: Don't default XAR entry atime/mtime to the current time
MFC after: 1 month
Sync libarchive with vendor.
Relevant vendor changes:
PR #905: Support for Zstandard read and write filters
PR #922: Avoid overflow when reading corrupt cpio archive
Issue #935: heap-based buffer overflow in xml_data (CVE-2017-14166)
OSS-Fuzz 2936: Place a limit on the mtree line length
OSS-Fuzz 2394: Ensure that the ZIP AES extension header is large enough
OSS-Fuzz 573: Read off-by-one error in RAR archives (CVE-2017-14502)
MFC after: 1 week
Security: CVE-2017-14166, CVE-2017-14502
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
Sync libarchive with vendor
Vendor changes (FreeBSD-related):
- constify variables in several places
- unify platform ACL code in a single source file
- fix unused variable if compiling on FreeBSD without NFSv4 ACL support
MFC after: 3 days
X-MFC-with: 315636, 315876
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
Update libarchive to 3.2.0
New features:
- new bsdcat command-line utility
- LZ4 compression (in src only via external utility from ports)
- Warc format support
- 'Raw' format writer
- Zip: Support archives >4GB, entries >4GB
- Zip: Support encrypting and decrypting entries
- Zip: Support experimental streaming extension
- Identify encrypted entries in several formats
- New --clear-nochange-flags option to bsdtar tries to remove noschg and
similar flags before deleting files
- New --ignore-zeros option to bsdtar to handle concatenated tar archives
- Use multi-threaded LZMA decompression if liblzma supports it
- Expose version info for libraries used by libarchive
Patched files (fixed compiler warnings):
contrib/libarchive/cat/bsdcat.c (vendor PR #702)
contrib/libarchive/cat/bsdcat.h (vendor PR #702)
contrib/libarchive/libarchive/archive_read_support_format_mtree.c (PR #701)
contrib/libarchive/libarchive_fe/err.c (vendor PR #703)
MFC after: 1 month
Relnotes: yes
the FreeBSD test suite
functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.
A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)
As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
We want to ensure we always use libarchive from ports in the ports tree.
It simplifies ports maintainance and anyway libarchive.pc was not reflecting the
different way libarchive can be built in base
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
Update libarchive to 3.1.2
Some of new features:
- support for lrzip and grzip compression
- support for writing tar v7 format
- b64encode and uuencode filters
- support for __MACOSX directory in Zip archives
- support for lzop compresion (external utility)
Some of new features:
- New readers: RAR, LHA/LZH, CAB reader, 7-Zip
- New writers: ISO9660, XAR
- Improvements to many formats, especially including ISO9660 and Zip
- Stackable write filters to write, e.g., tar.gz.uu in a single pass
- Exploit seekable input; new "seekable" Zip reader can exploit the Zip
Central Directory when it's available; the old "streamable" Zip reader
is still fully supported for cases where seeking is not possible.
Full release notes available at:
https://github.com/libarchive/libarchive/wiki/ReleaseNotes
[mixing the two can be quite bad -- they define the same context structures,
but with differing structure members (and sizes)]
Update the hash function support comments, and update config_freebsd.h
to match.
Approved by: kientzle
Adjust dependencies for programs using libarchive
Add xz and linkage against liblzma to rescue system
Approved by: kientzle, delphij (mentor)
MFC after: 2 weeks
Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and
lower it when needed.
I'm setting WARNS?=0 for secure/. It seems secure/ includes the
Makefile.inc provided by lib/. I'm not going to touch that directory.
Most of the code there is contributed anyway.
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
Unfortunately, liblzma itself is GPLed, so unlikely to become part of
the FreeBSD base system.
However, the core lzma compression/decompression code is public
domain, so it should be feasible for someone to create a compatible
library without the GPL strings.
