RSTP provides faster spanning tree convergence, the protocol will exchange
information with neighboring switches to quickly transition to forwarding
without creating loops. The code will default to RSTP mode but will downgrade
any port connected to a legacy STP network so is fully backward compatible.
Reviewed by: syrinx
Tested by: syrinx
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.
Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.
Reviewed by: bde (with contributions)
Tested by: emax, marius
MFC after: 1 week
packets. Reimplement this correctly and use a sysctl that defaults to off so
the user doesnt get any suprises if ipfw blocks the ARP packet.
MFC after: 3 days
m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.
Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:
m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */
m->m_flags |= M_VLANTAG;
to mark the packet m with the specified VLAN tag.
On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:
if (m->m_flags & M_VLANTAG) {
... = m->m_pkthdr.ether_vtag; /* htons()? */
... pass tag to hardware ...
}
VLAN tags are stored in host byte order. Byte swapping may be necessary.
(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)
Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag
memory allocation have to be done.
Reviewed by: thompsa, yar
Sponsored by: TCP/IP Optimization Fundraise 2005
o add IFCAP_TSO[46] for drivers to announce this capability for IPv4 and IPv6
o add CSUM_TSO flag to mbuf pkthdr csum_flags field
o add tso_segsz field to mbuf pkthdr
o enhance ip_output() packet length check to allow for large TSO packets
o extend tcp_maxmtu[46]() with a flag pointer to pass interface capabilities
o adjust all callers of tcp_maxmtu[46]() accordingly
Discussed on: -current, -net
Sponsored by: TCP/IP Optimization Fundraise 2005
and skip over the normal IP processing.
Add a supporting function ifa_ifwithbroadaddr() to verify and validate the
supplied subnet broadcast address.
PR: kern/99558
Tested by: Andrey V. Elsukov <bu7cher-at-yandex.ru>
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
by restoring the ifv_proto field in the vlan softc and putting it to use
this time. It's a good companion for ifv_encaplen, which has already been
used throughout this driver.
before tagging them. This can help to work around brain-damage in some
switches that fail to pad a frame after untagging it if its length drops
below the minimum. This option is blessed by IEEE Std 802.1Q (2003 Ed.),
paragraph C.4.4.3.b. It's controlled by sysctl net.link.vlan.soft_pad.
Idea by: az
MFC after: 1 week
Two almost identical patches based on the if_tap work were submitted
via GNATS; I started out with the patch in 100796 from David Gilbert,
but could have easily started with the patch from Vilmos Nebehaj which
I found only later.
MFC after: 1 week
PR: 93976, 100796
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.
Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.
interface, do not just assign -1 to tag because it breaks the logic of
the code to follow. The better way is to handle this case as an unsupported
protocol and return unless INVARIANTS is in effect and we can panic.
Panic is good there because the scenario can happen only because of a
coding error elsewhere.
We also should show the interface name in the panic message for easier
debugging of the problem, should it ever emerge.
Submitted by: qingli (initially)
as it tried to solve:
- it smuggled hidden 802.1q details into otherwise protocol-neutral code;
- it put an important code consistency check under DEBUG, which was never
defined by anyone but a developer hacking this file for the moment;
- lastly, the former bcopy() call had been correct as long as the "dead"
code was there.
(A new version of the fix for tag of -1 to come in the next commit.)
Agreed by: qingli
vlan tag processing, the code will use bcopy() to remove the vlan
tag field but the code copies 2 bytes too many, which essentially
overwrites the protocol type field.
Also, a tag value of -1 is generated for unrecognized interface type,
which would cause an invalid memory access in the vlans[] array.
In addition, removed a line of dead code and its associated comments.
Reviewed by: sam
take a timeval indicating when the packet was captured. Move
microtime() to the calling functions and grab the timestamp as soon
as we know that we're going to call catchpacket at least once.
This means that we call microtime() once per matched packet, as
opposed to once per matched packet per bpf listener. It also means
that we return the same timestamp to all bpf listeners, rather than
slightly different ones.
It would be more accurate to call microtime() even earlier for all
packets, as you have to grab (1+#listener) locks before you can
determine if the packet will be logged. You could always grab a
timestamp before the locks, but microtime() can be costly, so this
didn't seem like a good idea.
(I guess most ethernet interfaces will have a bpf listener these
days because of dhclient. That means that we could be doing two bpf
locks on most packets going through the interface.)
PR: 71711
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abort is now a
notification of close also, and no longer detaches. pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket. This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.
This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree(). With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.
Reviewed by: gnn
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)
Reviewed by: arch@
already locked. The reason to do this is to avoid two lock+unlock operations
in a row. We need the lock here to serialize access to bd_pid for stats
collection purposes.
Drop the locks all together on detach, as they will be picked up by
knlist_remove.
This should fix a failed locking assertion when kqueue is being used with bpf
descriptors.
Discussed with: jmg
except in places dealing with ifaddr creation or destruction; and
in such special places incomplete ifaddrs should never be linked
to system-wide data structures. Therefore we can eliminate all the
superfluous checks for "ifa->ifa_addr != NULL" and get ready
to the system crashing honestly instead of masking possible bugs.
Suggested by: glebius, jhb, ru
Previously, another thread could get a pointer to the
interface by scanning the system-wide list and sleep
on the global vlan mutex held by vlan_unconfig().
The interface was gone by the time the other thread
woke up.
In order to be able to call vlan_unconfig() on a detached
interface, remove the purely cosmetic bzero'ing of IF_LLADDR
from the function because a detached interface has no addresses.
Noticed by: a stress-testing script by maxim
Reviewed by: glebius
tested and then set. [1]
Reorganise things to eliminate this, we now ensure that enc0 can not be
destroyed which as the benefit of no longer needing to lock in
ipsec_filter and ipsec_bpf. The cloner will create one interface during the
init so we can guarantee that encif will be valid before any SPD entries are
added to ipsec.
Spotted by: glebius [1]
encryption. There are two functions, a bpf tap which has a basic header with
the SPI number which our current tcpdump knows how to display, and handoff to
pfil(9) for packet filtering.
Obtained from: OpenBSD
Based on: kern/94829
No objections: arch, net
MFC after: 1 month
departing trunk so that we don't get into trouble later
by dereferencing a stale pointer to dead trunk's things.
Prodded by: oleg
Sponsored by: RiNet (Cronyx Plus LLC)
MFC after: 1 week
list.
- First remove from global list, then start destroying.
PR: kern/97679
Submitted by: Alex Lyashkov <shadow itt.net.ru>
Reviewed by: rwatson, brooks
order to - for example - apply firewall rules to a whole group of
interfaces. This is required for importing pf from OpenBSD 3.9
Obtained from: OpenBSD (with changes)
Discussed on: -net (back in April)
pointer to a zeroed, statically allocated bpf_if structure. This way the
LIST_EMPTY() macro will always return true. This allows us to remove the
additional unconditional memory reference for each packet in the fast path.
Discussed with: sam
255.255.255.0, and a default route with gateway x.x.x.1. Now if
the address mask is changed to something more specific, e.g.,
255.255.255.128, then after the mask change the default gateway
is no longer reachable.
Since the default route is still present in the routing table,
when the output code tries to resolve the address of the default
gateway in function rt_check(), again, the default route will be
returned by rtalloc1(). Because the lock is currently held on the
rtentry structure, one more attempt to hold the lock will trigger
a crash due to "lock recursed on non-recursive mutex ..."
This is a general problem. The fix checks for the above condition
so that an existing route entry is not mistaken for a new cloned
route. Approriately, an ENETUNREACH error is returned back to the
caller
Approved by: andre
resulting in some build failures. Instead, to fix the problem of bpf not
being present, check the pointer before dereferencing it.
This is a temporary bandaid until we can decide on how we want to handle
the bpf code not being present. This will be fixed shortly.
(1) bpf peer attaches to interface netif0
(2) Packet is received by netif0
(3) ifp->if_bpf pointer is checked and handed off to bpf
(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
initialized to NULL.
(5) ifp->if_bpf is dereferenced by bpf machinery
(6) Kaboom
This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.
Summary of changes:
- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
bpf interface structure. Once this is done, ifp->if_bpf should never be
NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
a lockless read bpf peer list associated with the interface. It should
be noted that the bpf code will pickup the bpf_interface lock before adding
or removing bpf peers. This should serialize the access to the bpf descriptor
list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present
Now what happens is:
(1) Packet is received by netif0
(2) Check to see if bpf descriptor list is empty
(3) Pickup the bpf interface lock
(4) Hand packet off to process
From the attach/detach side:
(1) Pickup the bpf interface lock
(2) Add/remove from bpf descriptor list
Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).
[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
not we have any bpf peers that might be interested in receiving packets.
In collaboration with: sam@
MFC after: 1 month
result, raw_uabort() now needs to call raw_detach() directly. As
raw_uabort() is never called, and raw_disconnect() is probably not ever
actually called in practice, this is likely not a functional change, but
improves congruence between protocols, and avoids a NULL raw cb pointer
after disconnect, which could result in a panic.
MFC after: 1 month
notification so all interfaces including pseudo are reported. When netif
creates the clones at startup devctl_disable has not been turned off yet so the
interfaces will not be initialised twice, enforce this by adding an explicit
order between rc.d/netif and rc.d/devd.
This change allows actions to taken in userland when an interface is cloned
and the pseudo interface will be automatically configured if a ifconfig_<int>=""
line exists in rc.conf.
Reviewed by: brooks
No objections on: net
for IOCTLs where casting data to intptr_t * isn't the right thing to do
as _IO() isn't used for them but _IOR(..., int)/_IOW(..., int) are (i.e.
for all IOCTLs except VMIO_SIOCSIFFLAGS), fixing tap(4) on big-endian
LP64 machines.
PR: sparc64/98084
OK'ed by: emax
MFC after: 1 week
actually destroyed. Also move call to knlist_init() into tapcreate(). This
should fix panic described in kern/95357.
PR: kern/95357
No response from: freebsd-current@
MFC after: 3 days
gateways which are unreachable except through the default router. For
example, assuming there is a default route configured, and inserting
a route
"route add 64.102.54.0/24 60.80.1.1"
is currently allowed even when 60.80.1.1 is only reachable through
the default route. However, an error is thrown when this route is
utilized, say,
"ping 64.102.54.1" will return an error
This type of route insertion should be disallowed becasue:
1) Let's say that somehow our code allowed this packet to flow to
the default router, and the default router knows the next hop is
60.80.1.1, then the question is why bother inserting this route in
the 1st place, just simply use the default route.
2) Since we're not talking about source routing here, the default
router could very well choose a different path than using 60.80.1.1
for the next hop, again it defeats the purpose of adding this route.
Reviewed by: ru, gnn, bz
Approved by: andre
destination. These checks are needed so we do not install
a route looking like this:
(0) 192.0.2.200 UH tun0 =>
When removing this route the kernel will start to walk
the address space which looks like a hang on 64bit platforms
because it'll take ages while on 32bit you should see a panic
when kernel debugging options are turned on.
The problem is in rtrequest1:
if (netmask) {
rt_maskedcopy(dst, ndst, netmask);
} else
bcopy(dst, ndst, dst->sa_len);
In both cases the len might be 0 if the application forgot to
set it. If so ndst will be all-zero leading to above
mentioned strange routes.
This is an application error but we must not fail/hang/panic
because of this.
Looks ok: gnn
No objections: net@ (silence)
MFC after: 8 weeks
The packet filter may reassemble the ip fragments and return a packet that is
larger than the MTU of the sending interface. There is no check for DF or icmp
replies as we can only get a large packet to fragment by reassembling a
previous fragment, and this only happens after a call to pfil(9).
Obtained from: OpenBSD (mostly)
Glanced at by: mlaier
MFC after: 1 month
protocols invoke after allocating a PCB, so so_pcb should be non-NULL.
It is only used by the two IPSEC implementations, so I didn't hit it in
my testing.
Reported by: pjd
MFC after: 3 months
the so_pcb pointer on the socket is always non-NULL. This eliminates
countless unnecessary error checks, replacing them with assertions.
MFC after: 3 months
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.
soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.
Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.
In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.
netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.
MFC after: 3 months
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.
This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.
MFC after: 3 months
details see PR kern/94448.
PR: kern/94448
Original patch: Eygene A. Ryabinkin <rea-fbsd at rea dot mbslab dot kiae dot ru>Final patch: thompsa@
Tested by: thompsa@, Eygene A. Ryabinkin
MFC after: 7 days
K&R style function declarations with ANSI style. Also fix endian bugs
accessing ioctl arguments that are passed by value.
PR: kern/93897
Submitted by: Vilmos Nebehaj < vili at huwico dot hu >
MFC after: 1 week
applications.
Open[BGP|OSPF]D make use of this to determine the link status of
interfaces to make the right routing descisions.
Obtained from: OpenBSD
MFC after: 3 days
- Allow RTM_CHANGE to change a number of route flags as specified by
RTF_FMASK.
- The unused rtm_use field in struct rt_msghdr is redesignated as
rtm_fmask field to communicate route flag changes in RTM_CHANGE
messages from userland. The use count of a route was moved to
rtm_rmx a long time ago. For source code compatibility reasons
a define of rtm_use to rtm_fmask is provided.
These changes faciliate running of multiple cooperating routing
daemons at the same time without causing undesired interference.
Open[BGP|OSPF]D make use of these features to have IGP routes
override EGP ones.
Obtained from: OpenBSD (claudio@)
MFC after: 3 days
will remain in the disabled state until another link event happens in the
future (if at all). Add a timer to periodically check the interface state and
recover.
Reported by: Nik Lam <freebsdnik j2d.lam.net.au>
MFC after: 3 days
re-organizing the monitor return logic. We perform interface monitoring
checks after we have determined if the CRC is still on the packet, if
it is, m_adj() is called which will adjust the packet length. This
ensures that we are not including CRC lengths in the byte counters for
each packet.
Discussed with: andre, glebius
that we might have address collisions, so make sure that this hardware address
isn't already in use on another bridge.
Submitted by: csjp
MFC after: 1 month
destination interface as a member of our bridge or this is a unicast packet,
push it through the bpf(4) machinery.
For broadcast or multicast packets, don't bother with the bpf(4) because it will
be re-injected into ether_input. We do this before we pass the packets through
the pfil(9) framework, as it is possible that pfil(9) will drop the packet or
possibly modify it, making it very difficult to debug firewall issues on the
bridge.
Further, implemented IFF_MONITOR for bridge interfaces. This does much the same
thing that it does for regular network interfaces: it pushes the packet to any
bpf(4) peers and then returns. This bypasses all of the bridge machinery,
saving mutex acquisitions, list traversals, and other operations performed by
the bridging code.
This change to the bridging code is useful in situations where individuals use a
bridge to multiplex RX/TX signals from two interfaces, as is required by some
network taps for de-multiplexing links and transmitting the RX/TX signals
out through two separate interfaces. This behaviour is quite common for network
taps monitoring links, especially for certain manufacturers.
Reviewed by: thompsa
MFC after: 1 month
Sponsored by: Seccuris Labs
- use the cu_bridge_id rather than the cu_rootid for the bridge address [1]
- the memcmp return value is not signed so the wrong interface may have been
selected
- fix up the calculation of sc_bridge_id
PR: kern/93909 [1]
MFC after: 3 days
and want to have crypto support loaded as KLD. By moving zlib to separate
module and adding MODULE_DEPEND directives, it is possible to use such
configuration without complication. Otherwise, since IPSEC is linked with
zlib (just like crypto.ko) you'll get following error:
interface zlib.1 already present in the KLD 'kernel'!
Approved by: cognet (mentor)
zero in this case.) A kernel driver has IFF_DRV_RUNNING
at its full disposal while IFF_UP may be toggled only by
humans or their daemonic deputies from the userland.
MFC after: 3 days
did not stop at the right node. Change the backtracking check from
smaller-than to smaller-or-equal to prevent this from happening.
While here fix one additional problem where the insertion of the
default route traversed the entire tree.
PR: kern/38752
Submitted by: qingli (before I became committer)
Reviewed by: andre
MFC after: 3 days
filtering mechanisms to use the new rwlock(9) locking API:
- Drop the variables stored in the phil_head structure which were specific to
conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
hooks to be ran, and returns if not. This check is already performed by the
IP stacks when they call:
if (!PFIL_HOOKED(ph))
goto skip_hooks;
- Drop in assertion which makes sure that the number of hooks never drops
below 0 for good measure. This in theory should never happen, and if it
does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
API instead of our home rolled version
- Convert the inlined functions to macros
Reviewed by: mlaier, andre, glebius
Thanks to: jhb for the new locking API
- code expects memcmp() to return a signed value, our memcmp() returns 0 if
args are equal and > 0 if not.
- It's possible to hijack interface for static entry. If bridge recieves
packet from interface marked as learning it will replace the bridge_rtnode
entry for the source address even if such entry marked as static.
Submitted by: Gleb Kurtsov <k-gleb yandex.ru>
MFC after: 3 days
beginning and simply refuse to attach to a parent without either
flag.
Our network stack cannot handle well IFF_BROADCAST or IFF_MULTICAST
on an interface changing on the fly. E.g., IP will or won't assign
a broadcast address to an interface and join the all-hosts multicast
group on it depending on its IFF_BROADCAST and IFF_MULTICAST settings.
Should the flags alter later, IP will miss the change and keep using
bogus settings. This can lead to evil things like supplying an
invalid broadcast address or trying to leave a multicast group that
hasn't been joined. So just avoid touching the flags since an
interface was created. This has no practical purpose.
Discussed with: -net, glebius, oleg
MFC after: 1 week
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.
The most important changes:
o Instead of global linked list of all vlan softc use a per-trunk
hash. The size of hash is dynamically adjusted, depending on
number of entries. This changes struct ifnet, replacing counter
of vlans with a pointer to trunk structure. This change is an
improvement for setups with big number of VLANs, several interfaces
and several CPUs. It is a small regression for a setup with a single
VLAN interface.
An alternative to dynamic hash is a per-trunk static array with
4096 entries, which is a compile time option - VLAN_ARRAY. In my
experiments the array is not an improvement, probably because such
a big trunk structure doesn't fit into CPU cache.
o Introduce an UMA zone for VLAN tags. Since drivers depend on it,
the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
This change is a big improvement for any setup utilizing vlan(4).
o Use rwlock(9) instead of mutex(9) for locking. We are the first
ones to do this! :)
o Some drivers can do hardware VLAN tagging + hardware checksum
offloading. Add an infrastructure for this. Whenever vlan(4) is
attached to a parent or parent configuration is changed, the flags
on vlan(4) interface are updated.
In collaboration with: yar, thompsa
In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
however IPv4-in-IPv4 tunnels are now stable on SMP. Details:
- Add per-softc mutex.
- Hold the mutex on output.
The main problem was the rtentry, placed in softc. It could be
freed by ip_output(). Meanwhile, another thread being in
in_gif_output() can read and write this rtentry.
Reported by: many
Tested by: Alexander Shiryaev <aixp mail.ru>
Vararg functions have a different calling convention than regular
functions on amd64. Casting a varag function to a regular one to
match the function pointer declaration will hide the varargs from
the caller and we will end up with an incorrectly setup stack.
Entirely remove the varargs from these functions and change the
functions to match the declaration of the function pointers.
Remove the now unnecessary casts.
Lots of explanations and help from: peter
Reviewed by: peter
PR: amd64/89261
MFC after: 6 days
may have changed by m_pullup() during fastforward processing.
While this is a bug it is actually never triggered in real world
situations and it is not remotely exploitable.
Found by: Coverity Prevent(tm)
Coverity ID: CID780
Sponsored by: TCP/IP Optimization Fundraise 2005
restored when its removed from the bridge.
At the moment we only clear IFCAP_TXCSUM. Since a locally generated packet on
the bridge may be sent out any one or more interfaces it cant be assumed that
every card does hardware csums. Most bridges don't generate a lot of traffic
themselves so turning off offloading won't hurt, bridged packets are
unaffected.
Tested by: Bruce Walker (bmw borderware.com)
MFC after: 5 days
ef_clone(); we were testing the original ifnet, not the one allocated.
When aborting ef_clone() due to if_alloc() failing, free the allocated
efnet structure rather than leaking it.
Noticed by: Coverity Prevent analysis tool
MFC after: 3 days
SLIST_FOREACH_SAFE() rather than SLIST_FOREACH(), as elements are
freed on each iteration of the loop. This prevents use-after-free.
Noticed by: Coverity Prevent analysis tool
MFC after: 3 days
attempted to cast a struct ifnet to a struct fw_com which resulted in
data corruption.
PR: kern/91307
Submitted by: Alex Semenyaka <alex at semenyaka do ru>
MFC After: 6 days
