Add a check for NULL before strcmp on smbios information incase it is not populated
Differential Revision: https://reviews.freebsd.org/D2750
Reviewed by: ngie, jhb
Approved by: rpaulo
Sponsored by: ScaleEngine Inc.
https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/leds-gpio.txt
Without this booting the VSATV102 causes the blue "working" led to turn
off when the kernel starts up. With this the led (which is turned on by
the firmware) stays on since that's the default state specified in the FDT.
Expanded the meaning of the led_create_state state parameter in order
to implement support for "keep". The original values were:
== 0 Off
!= 0 On
The new values are:
== -1 don't change / keep current setting
== 0 Off
!= -1 && != 0 On
This should have no effect on acpi_asus_attach which only calls
led_create_state with state set to 1. Updated acpi_ibm_attach
in order to avoid surprises.
Differential Revision: https://reviews.freebsd.org/D2615
Submitted by: John Wehle
Reviewed by: gonzo, loos
directly accessed. Although this will work on some platforms, it can
throw an exception if the pointer is invalid and then panic the kernel.
Add a missing SYSCTL_IN() of "SCTP_BASE_STATS" structure.
MFC after: 3 days
Sponsored by: Mellanox Technologies
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
This should fix some Thinkpad specific problems such as
connecting to a headphone jack is not functional on X41.
Reviewed by: takawata
MFC after: 1 week
the PS/2 mouse controller. Thus, when acpi_ibm(4) claimed the mouse
device, the mouse would stop working. The one ACPI dump of an R40 that
I've looked at includes an HKEY device with the proper "IBM0068" ID, so
I'm not sure how the "IBM0057" ID could have helped at all.
MFC after: 1 week
Approved by: njl
- Add support for adjusting the fan speed if the fan control mode is manual
Documentation for the relevant embedded controller register was obtained from
http://www.thinkwiki.org/wiki/Patch_for_controlling_fan_speed
Tested on: R51 by Fabian Keil
T41p by markus
Requested by: many
Approved by: philip
MFC after: 1 week
- Initialize val_ec with the content of the volume EC register
for ACPI_IBM_METHOD_VOLUME and ACPI_IBM_METHOD_MUTE in acpi_ibm_sysctl_set()
if there is no CMOS handle present. This fixes setting volume and mute on
such models.
Submitted by: ru
Approved by: philip
- Restructured for easier extensibility and maintainability
- To be more uniform with the other ACPI extras drivers and to better reflect
their actual meaning, some sysctls were moved:
o brightness -> lcd_brightness
o keylight -> thinklight
o enable -> events
o misckey -> hotkey
o avail_mask -> availmask
o key_mask -> eventmask
- New "initialmask" sysctl, which holds the initial eventmask
- The "wlan" sysctl is now read-only, since writing to it didn't have
any effect
- The "version" sysctl was removed, since it seems to be the same (0x100)
on all models I have seen
- Support for more hotkeys by the "hotkey" sysctl
- Improved support of ACPI events. Disabled by default, since it unexpectedly
changes the behaviour of some keys. (on my T41p there are now 24 different
keypress events that get reported)
- write support for: volume, mute, lcd_brightness and thinklight
- led(4) interface for the thinklight [1]
- New sysctls "fan" and "fan_speed" to support reading of fan status and speed
- New sysctl "thermal" to support reading of up to 8 thermal sensors
Reviewed by: philip
Approved by: philip
Submitted by: simon [1]
Inspired by: The Linux ibm_acpi driver by Borislav Deianov
http://ibm-acpi.sourceforge.net/
The ThinkPad Button program (tpb) by Markus Braun
http://www.nongnu.org/tpb/
Thanks to: brueffer, dvl, njl, philip, simon, takawata and the many
testers from freebsd-acpi@ and freebsd-mobile@
