Remove all variations of rtrequest <rtrequest1_fib, rtrequest_fib,
in6_rtrequest, rtrequest_fib> and their uses and switch to
to rib_action(). This is part of the new routing KPI.
Submitted by: Neel Chauhan <neel AT neelc DOT org>
Differential Revision: https://reviews.freebsd.org/D25546
Old subscription model allowed only single customer.
Switch inet6 to the new subscription api and eliminate the old model.
Differential Revision: https://reviews.freebsd.org/D25615
Currently the only reason of refcounting rtentries is the need to report
the rtable operation details immediately after the execution.
Delaying rtentry reclamation allows to stop refcounting and simplify the code.
Additionally, this change allows to reimplement rib_lookup_info(), which
is used by some of the customers to get the matching prefix along
with nexthops, in more efficient way.
The change keeps per-vnet rtzone uma zone. It adds nh_vnet field to
nhop_priv to be able to reliably set curvnet even during vnet teardown.
Rest of the reference counting code will be removed in the D24867 .
Differential Revision: https://reviews.freebsd.org/D24866
If the neighbor entry for an IPv6 TCP session using unmapped
mbufs times out, IPv6 will send an icmp6 dest. unreachable
message. In doing this, it will try to do a software checksum
on the reflected packet. If this is a TCP session using unmapped
mbufs, then there will be a kernel panic.
To fix this, just free packets with unmapped mbufs, rather
than sending the icmp.
Reviewed by: np, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24821
With the upcoming multipath changes described in D24141,
rt->rt_nhop can potentially point to a nexthop group instead of
an individual nhop.
To simplify caller handling of such cases, change ifa_rtrequest() callback
to pass changed nhop directly.
Differential Revision: https://reviews.freebsd.org/D24604
Nexthop objects implementation, defined in r359823,
introduced sys/net/route directory intended to hold all
routing-related code. Move recently-introduced route_temporal.c and
private route_var.h header there.
Differential Revision: https://reviews.freebsd.org/D24597
One of the goals of the new routing KPI defined in r359823
is to entirely hide`struct rtentry` from the consumers.
It will allow to improve routing subsystem internals and deliver
features much faster.
This is one of the last changes, effectively moving struct rtentry
definition to a net/route_var.h header, internal to the routing subsystem.
Differential Revision: https://reviews.freebsd.org/D24580
One of the goals of the new routing KPI defined in r359823 is to entirely
hide`struct rtentry` from the consumers. It will allow to improve routing
subsystem internals and deliver more features much faster.
This commit is mostly mechanical change to eliminate direct struct rtentry
field accesses.
The only notable difference is AF_LINK gateway encoding.
AF_LINK gw is used in routing stack for operations with interface routes
and host loopback routes.
In the former case it indicates _some_ non-NULL gateway, as the interface
is the same as in rt_ifp in kernel and rtm_ifindex in rtsock reporting.
In the latter case the interface index inside gateway was used by the IPv6
datapath to verify address scope for link-local interfaces.
Kernel uses struct sockaddr_dl for this type of gateway. This structure
allows for specifying rich interface data, such as mac address and interface
name. However, this results in relatively large structure size - 52 bytes.
Routing stack fils in only 2 fields - sdl_index and sdl_type, which reside
in the first 8 bytes of the structure.
In the new KPI, struct nhop_object tries to be cache-efficient, hence
embodies gateway address inside the structure. In the AF_LINK case it
stores stortened version of the structure - struct sockaddr_dl_short,
which occupies 16 bytes. After D24340 changes, the data inside AF_LINK
gateway will not be used in the kernel at all, leaving rtsock as the only
potential concern.
The difference in rtsock reporting:
(old)
got message of size 240 on Thu Apr 16 03:12:13 2020
RTM_ADD: Add Route: len 240, pid: 0, seq 0, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 link#5 255.255.255.0
(new)
got message of size 200 on Sun Apr 19 09:46:32 2020
RTM_ADD: Add Route: len 200, pid: 0, seq 0, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 link#5 255.255.255.0
Note 40 bytes different (52-16 + alignment).
However, gateway is still a valid AF_LINK gateway with proper data filled in.
It is worth noting that these particular messages (interface routes) are mostly
ignored by routing daemons:
* bird/quagga/frr uses RTM_NEWADDR and ignores prefix route addition messages.
* quagga/frr ignores routes without gateway
More detailed overview on how rtsock messages are used by the
routing daemons to reconstruct the kernel view, can be found in D22974.
Differential Revision: https://reviews.freebsd.org/D24519
One of the goals of the new routing KPI defined in r359823 is to
entirely hide`struct rtentry` from the consumers. It will allow to
improve routing subsystem internals and deliver more features much faster.
This change is one of the ongoing changes to eliminate direct
struct rtentry field accesses.
Additionally, with the followup multipath changes, single rtentry can point
to multiple nexthops.
With that in mind, convert rti_filter callback used when traversing the
routing table to accept pair (rt, nhop) instead of nexthop.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24440
Move the SYSCTL_DECL to the top of the file. Move the sysctl function
before SYSCTL_PROC so that we don't need an extra function declaration in
the middle of the file.
No functional changes.
MFC after: 3 weeks
Sponsored by: Netflix
Burn bridges and replace the last two calls of defrouter_select() with
defrouter_select_fib(). That allows us to retire defrouter_select()
and make it more clear in the calling code that it applies to all FIBs.
Sponsored by: Netflix
We are taking the same actions in both cases of the branch inside the block.
Simplify that code as the extra branch is not needed.
MFC after: 3 weeks
Sponsored by: Netflix
Move the nd_defrouter along with the sysctl handler from nd6.c to
nd6_rtr.c and make the variable file static. Provide (temporary)
new accessor functions for code manipulating nd_defrouter from nd6.c,
and stop exporting functions no longer needed outside nd6_rtr.c.
This also shuffles a few functions around in nd6_rtr.c without
functional changes.
Given all nd_defrouter logic is now in one place we can tidy up the
code, locking and, and other open items.
MFC after: 3 weeks
X-MFC: keep exporting the functions
Sponsored by: Netflix
call into leaf functions that require epoch. Since the function is already
run in non-sleepable context, it should be safe to cover it whole with epoch.
Reported by: syzcaller
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.
However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.
Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.
On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().
This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.
Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.
This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.
Reviewed by: gallatin, hselasky, cy, adrian, kristof
Differential Revision: https://reviews.freebsd.org/D19111
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
stf(4) interfaces are not multicast-capable so they can't perform DAD.
They also did not set IFF_DRV_RUNNING when an address was assigned, so
the logic in nd6_timer() would periodically flag such an address as
tentative, resulting in interface flapping.
Fix the problem by setting IFF_DRV_RUNNING when an address is assigned,
and do some related cleanup:
- In in6if_do_dad(), remove a redundant check for !UP || !RUNNING.
There is only one caller in the tree, and it only looks at whether
the return value is non-zero.
- Have in6if_do_dad() return false if the interface is not
multicast-capable.
- Set ND6_IFF_NO_DAD when an address is assigned to an stf(4) interface
and the interface goes UP as a result. Note that this is not
sufficient to fix the problem because the new address is marked as
tentative and DAD is started before in6_ifattach() is called.
However, setting no_dad is formally correct.
- Change nd6_timer() to not flag addresses as tentative if no_dad is
set.
This is based on a patch from Viktor Dukhovni.
Reported by: Viktor Dukhovni <ietf-dane@dukhovni.org>
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19751
When we roam between networks and our link-state goes down, automatically remove
the IPv6-Only flag from the interface. Otherwise we might switch from an
IPv6-only to and IPv4-only network and the flag would stay and we would prevent
IPv4 from working.
While the actual function call to clear the flag is under EXPERIMENTAL,
the eventhandler is not as we might want to re-use it for other
functionality on link-down event (such was re-calculate default routers
for example if there is more than one).
Reviewed by: hrs
Differential Revision: https://reviews.freebsd.org/D19487
- Remove macros that covertly create epoch_tracker on thread stack. Such
macros a quite unsafe, e.g. will produce a buggy code if same macro is
used in embedded scopes. Explicitly declare epoch_tracker always.
- Unmask interface list IFNET_RLOCK_NOSLEEP(), interface address list
IF_ADDR_RLOCK() and interface AF specific data IF_AFDATA_RLOCK() read
locking macros to what they actually are - the net_epoch.
Keeping them as is is very misleading. They all are named FOO_RLOCK(),
while they no longer have lock semantics. Now they allow recursion and
what's more important they now no longer guarantee protection against
their companion WLOCK macros.
Note: INP_HASH_RLOCK() has same problems, but not touched by this commit.
This is non functional mechanical change. The only functionally changed
functions are ni6_addrs() and ni6_store_addrs(), where we no longer enter
epoch recursively.
Discussed with: jtl, gallatin
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
Restore state 6. Many of the UNH tests end up exercising this
state, where we have a new neighbor cache entry and a new link-layer
entry is being created for it. The link-layer address is currently
unknown so the initial state of the "llentry" should remain initialized
to ND6_LLINFO_NOSTATE so that the ND code will send a solicitation.
Setting this to ND6_LLINFO_STALE implies that the link-level entry
is valid and can be used (but needs to be refreshed via the Neighbor
Unreachability state machine).
https://forums.freebsd.org/threads/64287/
Submitted by: Farrell Woods <Farrell_Woods@Dell.com>
Reviewed by: mjoras, dab, ae
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14059
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
This change extends the nd6 lock to protect the ND prefix list as well
as the list of advertising routers associated with each prefix. To handle
cases where the nd6 lock must be dropped while iterating over either the
prefix or default router lists, a generation counter is used to track
modifications to the lists. Additionally, a new mutex is used to serialize
prefix on-link/off-link transitions. This mutex must be acquired before
the nd6 lock and is held while updating the routing table in
nd6_prefix_onlink() and nd6_prefix_offlink().
Reviewed by: ae, tuexen (SCTP bits)
Tested by: Jason Wolfe <jason@llnw.com>,
Larry Rosenman <ler@lerctr.org>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D8125
r301217 re-added per-connection L2 caching from a previous change,
but it omitted caching in the fast path. Add it.
Reviewed By: gallatin
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D7239
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.
Submitted by: Mike Karels
Differential Revision: https://reviews.freebsd.org/D6262
When expiring a neighbour cache entry we may need to look up the associated
default router, which requires the nd6 read lock. To avoid an LOR, the nd6
lock should be acquired first.
X-MFC-With: r296063
Tested by: Larry Rosenman <ler@lerctr.org> (previous revision)
Factor out nd6 and in6_attach initialization to their own files.
Also move destruction into those files though still called from
the central initialization.
Sponsored by: CK Software GmbH
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D5033
