Some of the changes are in the libexec/tftpd directory, but to functions that
are only used by tftp(1) (they share some code).
* strcpy => strlcpy (1006793, 1006794, 1006796, 1006741)
* Unchecked return value and TOCTTOU (1009314)
* NULL pointer dereference (1018035, 1018036)
Reported by: Coverity
CID: 1006793, 1006794, 1006796, 1006741, 1009314, 1018035
CID: 1018036
MFC after: 2 weeks
tftpd(8) should flush a newly written file to disk before ACKing the final DATA
packet. Otherwise there is a narrow race window when a subsequent read may not
see the file. This is somewhat related to r330710, but the race window is much
smaller. Hopefully this will fix the intermittent tests in Jenkins.
Reported by: Jenkins
MFC after: 2 weeks
quatactl(2) mechanism. (Read-only at this point, however.)
In particular, this is to allow rpc.rquotad query quotas
for NFS mounts, allowing users to see their quotas on the
hosts using the datasets.
The changes specifically:
* Add new RPC entry points for querying quotas.
* Changes the library routines to allow non-UFS quotas.
* Changes rquotad to check for quotas on mounted filesystems,
rather than being limited to entries in /etc/fstab
* Lastly, adds a VFS entry-point for ZFS to query quotas.
Note that this makes one unavoidable behavioural change: if quotas
are enabled, then they can be queried, as opposed to the current
method of checking for quotas being specified in fstab. (With
ZFS, if there are user or group quotas, they're used, always.)
Reviewed by: delphij, mav
Approved by: mav
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D15886
If tftpd receives a command with an unknown opcode, it simply exits 1. It
doesn't send an ERROR packet, and the client will hang waiting for one. Fix
it.
PR: 226005
MFC after: 3 weeks
On a WRQ (write request) tftpd checks whether the client has access
permission for the file in question. If not, then the write is prevented.
However, tftpd doesn't reply with an ERROR packet, nor does it abort.
Instead, it tries to receive the packet anyway.
The symptom is slightly different depending on the nature of the error. If
the target file is nonexistent and tftpd lacks permission to create it, then
tftpd will willingly receive the file, but not write it anywhere. If the
file exists but is not writable, then tftpd will fail to ACK to WRQ.
PR: 225996
MFC after: 3 weeks
tftpd(8) says that files may only be written if they already exist and are
publicly writable. tftpd.c verifies that a file is publicly writable if it
uses an absolute pathname. However, if the pathname is relative, that check
is skipped. Fix it.
Note that this is not a security vulnerability, because the transfer
ultimately doesn't work unless the file already exists and is owned by user
nobody. Also, this bug does not affect the default configuration, because
the default uses the "-s" option which makes all pathnames absolute.
PR: 226004
MFC after: 3 weeks
On an RRQ, tftpd doesn't exit as soon as it's finished receiving a file.
Instead, it waits five seconds just in case the client didn't receive the
server's last ACK and decides to resend the final DATA packet.
Unfortunately, this created a 5 second delay from when the client thinks
it's done sending the file, and when the file is available for other
processes.
Fix this bug by closing the file as soon as receipt is finished.
PR: 157700
Reported by: Barry Mishler <barry_mishler@yahoo.com>
MFC after: 3 weeks
tftpd(8) is difficult to test in isolation due to its relationship with
inetd. Create a test program that mimics the behavior of tftp(1) and
inetd(8) and verifies tftpd's response in several different scenarios.
These test cases cover all of the basic TFTP protocol, but not the optional
parts.
PR: 157700
PR: 225996
PR: 226004
PR: 226005
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14310
exist. This behaviour makes no sense for eg USB serial adapters, or
USB device-side serial templates.
This mostly reverts to pre-r135941 behaviour.
Reviewed by: imp@
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14198
objects' init functions instead of doing the setup via a constructor
in libc as the init functions may already depend on these handlers
to be in place. This gets us rid of:
- the undefined order in which libc constructors as __guard_setup()
and jemalloc_constructor() are executed WRT __sparc_utrap_setup(),
- the requirement to link libc last so __sparc_utrap_setup() gets
called prior to constructors in other libraries (see r122883).
For static binaries, crt1.o still sets up the user trap handlers.
o Move misplaced prototypes for MD functions in to the MD prototype
section of rtld.h.
o Sprinkle nitems().
Most notable, other than some style issues:
CVS 1.11:
do not use LOG_CONS.
CVS 1.13:
consistently use exit instead of return in main().
use LOG_WARNING instead of LOG_ERR for non critical errors.
Obtained from: NetBSD
MFC after: 2 weeks
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
The old value was probably fine back in 1998, when that code was imported
(although the comments still mention VAX, which was quite obsolete by then);
now, however, it's too small to handle our libc, which results in some
additional calls to munmap/mmap later on. Asking for more virtual address
space is virtually free, and syscalls are not, thus the change.
It was suggested by kib@ that this might be a symptom of a deeper problem.
It doesn't only affect libc, though - the change also improves rtld memory
management for eg KDE libraries. I guess it's just a natural bloat.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12834
The directives I added in r323466 and r323501 did not define a valid
CFA until several instructions into the associated functions. This
triggers an assertion in GDB when generating a stack trace while
stopped at the first instruction of PLT stub entry point since there
is no valid CFA rule for the first instruction.
This is probably just wrong on my part as the non-simple .cfi_startproc
would have defined a valid CFA. Instead, define a valid CFA as sp + 0
at the start of the functions and then use .cfa_def_offset to change the
offset when sp is adjusted later in the function.
Sponsored by: DARPA / AFRL
This is only cosmetic, but the entry point for rtld is not a leaf function,
and this avoids two .frame directives for rtld_start.
Sponsored by: DARPA / AFRL
This removes the need to call munmap(2) afterwards.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12767
Apply authenticated user context after update of wtmp(5) at start of session,
so that ftpd process is not killed by kernel with SIGXFSZ when user has
"filesize" limit lower than size of system wtmp file. Same applies
to session finalization: revert to super-user context before update of wtmp.
If ftpd hits limit while writing a file at user request,
do not get killed with SIGXFSZ instantly but apparently ignore the signal,
process error and report it to the user, and continue with the session.
PR: 143570
Approved by: avg (mentor), mav (mentor)
MFC after: 1 week
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
