rid's and to deallocate resources if a failure occurs during attach. This
patch also fixes the driver to return failure if bus_alloc_resource() for
the IRQ fails rather than panic'ing on the next line by passing a NULL
resource to bus_setup_intr(). The other attachments already do all this.
Submitted by: Jun Su <csujun@263.net>
In case no real/physical IEEE 802 address is available, both the expired
"draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802
network card is available") and RFC 2518 (section "6.4.1 Node Field
Generation Without the IEEE 802 Address") recommend (quoted from RFC
2518):
"The ideal solution is to obtain a 47 bit cryptographic quality random
number, and use it as the low 47 bits of the node ID, with the _most_
significant bit of the first octet of the node ID set to 1. This bit
is the unicast/multicast bit, which will never be set in IEEE 802
addresses obtained from network cards; hence, there can never be a
conflict between UUIDs generated by machines with and without network
cards."
Unfortunately, this incorrectly explains how to implement this and
the FreeBSD UUID generator code inherited this generation bug from
the broken reference code in the standards draft. They should instead
specify the "_least_ significant bit of the first octet of the node ID"
as the multicast bit in a memory and hexadecimal string representation
of a 48-bit IEEE 802 MAC address.
This standards bug arised from a false interpretation, as the multicast
bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet)
_transmission order_ of an IEEE 802 MAC address. The standards authors
forgot that the bitwise order of an _octet_ from a MAC address _memory_
and hexadecimal string representation is still always from left (MSB,
bit 7) to right (LSB, bit 0).
Fortunately, this UUID generation bug could have occurred on systems
without any Ethernet NICs only.
no-op on {i386/alpha/ia64/sparc64} where chars are signed by
default. Should help ARM and S390 which also suffer from this.
Tested on: ppc, i386, objdump disasm before/after diffs
Reviewed by: obrien, bde (a while back)
use a bounce buffer for the actual transfer to avoid crossing a 64k
boundary. To do this, we malloc a buffer twice as big as we need and then
find an aligned block within that buffer to do the transfer. The check
to see which part of the block we use used the wrong variable for part of
the condition meaning that in certain edge cases we would ask the BIOS to
cross a 64k boundary. The BIOS request would then fail resulting in file
transfers that just magically fail in the middle without any apparent
reason. Specifically, my tests for the splitfs boot floppies managed to
trigger this edge case.
MFC after: 1 week
X-MFC-info: along with fixes to libstand filesystems
Presumably, at some point, you had to include jail.h if you included
proc.h, but that is no longer required.
Result of: self injury involving adding something to struct prison
is NULL, otherwise ipsec4_process_packet() may try to m_freem() a
bad pointer.
In ipsec4_process_packet(), don't try to m_freem() 'm' twice; ipip_output()
already did it.
Obtained from: netbsd
o For traps, the cr.iip register points to the next instruction to
execute on interrupt return (modulo slot). Since we need to get
the bundle of the instruction that caused the FP fault/trap, make
sure we fetch the previous bundle if the next instruction is in
fact the first in a bundle.
o When we call the FPSWA handler, we need to tell it whether it's
a trap or a fault (first argument). This was hardcoded to mean a
fault.
Also, for FP faults, when a fault is converted to a trap, adjust the
cr.iip and cr.ipsr registers to point to the next instruction. This
makes sure that the SIGFPE handler gets a consistent state.
