We can switch into long mode directly with LA57 enabled.
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
This function is responsible for setting pc_domain in each pcpu
structure. Call it from the main function that starts APs, rather than
a separate SYSINIT. This makes it easier to close the window where
UMA's per-CPU slab allocator may be called while pc_domain is
uninitialized. In particular, the allocator uses pc_domain to allocate
domain-local pages, so allocations before this point end up using domain
0 for everything.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24757
When turning IBRS mitigation using sysctl, as opposed to loader tunable,
send IPI to tweak MSR on all cores. Right now code only performed MSR write
onr the CPU where sysctl was run.
Properly report hw.ibrs_active for IBRS_ALL. Split hw_ibrs_ibpb_active out
from ibrs_active, to keep the current semantic of guiding kernel entry and
exit handlers.
Reported and tested by: mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
It was broken before PAE/no-PAE merge, but since now PAE is the
default, resume is apparently becomes for all machines.
The corrected issues:
- the trampoline page is not mapped executable, so machine faults when
paging is on;
- MSR.EFER and %cr4 both should be loaded before paging is enabled,
otherwise paging structures are invalid (cr4.PAE and EFER.NX).
- MSR.EFER and %cr4 should be only loaded if present. I attempt to handle
this by not touching the registers if the value is zero.
There are some more bits still not quite correct, e.g. unconditional
access to %cr4 in resumectx.
Reported and debugging help by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
The SLIT and SRAT ACPI tables needs to be parsed on arm64 as well, on
systems that use UEFI/ACPI firmware and support NUMA. To do this, we
need to move most of the logic of x86/acpica/srat.c to dev/acpica and
provide an API that architectures can use to parse and configure ACPI
NUMA information.
This commit adds the API in srat.c as a first step, without making any
functional changes. We will move the common code to sys/dev/acpica
as the next step.
The functions added are:
* int acpi_pxm_init(int ncpus, vm_paddr_t maxphys) - to allocate and
initialize data structures used
* void acpi_pxm_parse_tables(void) - parse SRAT/SLIT, save the cpu and
memory proximity information
* void acpi_pxm_set_mem_locality(void) - use the saved data to set
memory locality
* void acpi_pxm_set_cpu_locality(void) - use the saved data to set cpu
locality
* void acpi_pxm_free(void) - free data structures allocated by init
On arm64, we do not have an cpu APIC id that can be used as index to
store CPU data, we need to use the Processor Uid. To help with this,
define internal functions cpu_add, cpu_find, cpu_get_info to store
and get CPU proximity information.
Reviewed by: markj, jhb (previous version)
Differential Revision: https://reviews.freebsd.org/D17940
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration. With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.
This method still has some performance overhead relative to disabling
NUMA support at compile time.
PR: 231460
Reviewed by: alc, gallatin, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17439
Pre-defined policies are useful when integrating the domainset(9)
policy machinery into various kernel memory allocators.
The refactoring will make it easier to add NUMA support for other
architectures.
No functional change intended.
Reviewed by: alc, gallatin, jeff, kib
Tested by: pho (part of a larger patch)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17416
The AMD Threadripper 2990WX is basically a slightly crippled Epyc.
Rather than having 4 memory controllers, one per NUMA domain, it has
only 2 memory controllers enabled. This means that only 2 of the
4 NUMA domains can be populated with physical memory, and the
others are empty.
Add support to FreeBSD for empty NUMA domains by:
- creating empty memory domains when parsing the SRAT table,
rather than failing to parse the table
- not running the pageout deamon threads in empty domains
- adding defensive code to UMA to avoid allocating from empty domains
- adding defensive code to cpuset to avoid binding to an empty domain
Thanks to Jeff for suggesting this strategy.
Reviewed by: alc, markj
Approved by: re (gjb@)
Differential Revision: https://reviews.freebsd.org/D1683
Use these predicates instead of inline references to vm_min_domains.
Also add a global all_domains set, akin to all_cpus.
Reviewed by: alc, jeff, kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17278
Previously, x86 used static ranges of IRQ values for different types
of I/O interrupts. Interrupt pins on I/O APICs and 8259A PICs used
IRQ values from 0 to 254. MSI interrupts used a compile-time-defined
range starting at 256, and Xen event channels used a
compile-time-defined range after MSI. Some recent systems have more
than 255 I/O APIC interrupt pins which resulted in those IRQ values
overflowing into the MSI range triggering an assertion failure.
Replace statically assigned ranges with dynamic ranges. Do a single
pass computing the sizes of the IRQ ranges (PICs, MSI, Xen) to
determine the total number of IRQs required. Allocate the interrupt
source and interrupt count arrays dynamically once this pass has
completed. To minimize runtime complexity these arrays are only sized
once during bootup. The PIC range is determined by the PICs present
in the system. The MSI and Xen ranges continue to use a fixed size,
though this does make it possible to turn the MSI range size into a
tunable in the future.
As a result, various places are updated to use dynamic limits instead
of constants. In addition, the vmstat(8) utility has been taught to
understand that some kernels may treat 'intrcnt' and 'intrnames' as
pointers rather than arrays when extracting interrupt stats from a
crashdump. This is determined by the presence (vs absence) of a
global 'nintrcnt' symbol.
This change reverts r189404 which worked around a buggy BIOS which
enumerated an I/O APIC twice (using the same memory mapped address for
both entries but using an IRQ base of 256 for one entry and a valid
IRQ base for the second entry). Making the "base" of MSI IRQ values
dynamic avoids the panic that r189404 worked around, and there may now
be valid I/O APICs with an IRQ base above 256 which this workaround
would incorrectly skip.
If in the future the issue reported in PR 130483 reoccurs, we will
have to add a pass over the I/O APIC entries in the MADT to detect
duplicates using the memory mapped address and use some strategy to
choose the "correct" one.
While here, reserve room in intrcnts for the Hyper-V counters.
PR: 229429, 130483
Reviewed by: kib, royger, cem
Tested by: royger (Xen), kib (DMAR)
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16861
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.
This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.
To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552
Speculative Store Bypass (SSB) is a speculative execution side channel
vulnerability identified by Jann Horn of Google Project Zero (GPZ) and
Ken Johnson of the Microsoft Security Response Center (MSRC)
https://bugs.chromium.org/p/project-zero/issues/detail?id=1528.
Updated Intel microcode introduces a MSR bit to disable SSB as a
mitigation for the vulnerability.
Introduce a sysctl hw.spec_store_bypass_disable to provide global
control over the SSBD bit, akin to the existing sysctl that controls
IBRS. The sysctl can be set to one of three values:
0: off
1: on
2: auto
Future work will enable applications to control SSBD on a per-process
basis (when it is not enabled globally).
SSBD bit detection and control was verified with prerelease microcode.
Security: CVE-2018-3639
Tested by: emaste (previous version, without updated microcode)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Resume starts CPU from the init state, which clears any loaded
microcode updates. As result, IBRS MSRs are no longer available,
until the microcode is reloaded.
I have to forcibly clear cpu_stdext_feature3, which assumes that CPUID
leaf 7 reg %ebx does not report anything except Meltdown/Spectre bugs
bits. If future CPUs add new bits there, hw_ibrs_recalculate() and
identify_cpu1()/identify_cpu2() need to be adjusted for that.
Submitted and tested by: Michael Danilov <mike.d.ft402@gmail.com>
PR: 227866
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15236
This sysctl allows a deeper dive into the sleep abyss comparing to
debug.acpi.suspend_bounce. When the new sysctl is set the system will
execute the suspend sequence up to the call to AcpiEnterSleepState().
That includes saving processor contexts and parking APs. Then, instead
of actually entering the sleep state, the BSP will call resumectx() to
emulate the wakeup. The APs should get restarted by the sequence of
Init and Startup IPIs that BSP sends to them.
MFC after: 8 days
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
restart_cpus() worked well enough by accident. Before this set of fixes,
resume_cpus() used the same cpuset (started_cpus, meaning CPUs directed to
restart) as restart_cpus(). resume_cpus() waited for the wrong cpuset
(stopped_cpus) to become empty, but since mixtures of stopped and suspended
CPUs are not close to working, stopped_cpus must be empty when resuming so
the wait is null -- restart_cpus just allows the other CPUs to restart and
returns without waiting.
Fix resume_cpus() to wait on a non-wrong cpuset for the ACPI case, and
add further kludges to try to keep it working for the XEN case. It
was only used for XEN. It waited on suspended_cpus. This works for
XEN. However, for ACPI, resuming is a 2-step process. ACPI has already
woken up the other CPUs and removed them from suspended_cpus. This
fix records the move by putting them in a new cpuset resuming_cpus.
Waiting on suspended_cpus would give the same null wait as waiting on
stopped_cpus. Wait on resuming_cpus instead.
Add a cpuset toresume_cpus to map the CPUs being told to resume to keep
this separate from the cpuset started_cpus for mapping the CPUs being told
to restart. Mixtures of stopped and suspended/resuming CPUs are still far
from working. Describe new and some old cpusets in comments.
Add further kludges to cpususpend_handler() to try to avoid breaking it
for XEN. XEN doesn't use resumectx(), so it doesn't use the second
return path for savectx(), and it goes from the suspended state directly
to the restarted state, while ACPI resume goes through the resuming state.
Enter the resuming state early for all cases so that resume_cpus can test
for being in this state and not have to worry about the intermediate
!suspended state for ACPI only.
Reviewed by: kib
it by a transient double mapping for the one instruction in ACPI wakeup
where it is needed (and for many surrounding instructions in ACPI resume).
Invalidate the TLB as soon as convenient after undoing the transient
mapping. ACPI resume already has the strict ordering needed for this.
This fixes the non-trapping of null pointers and other garbage pointers
below NBPDR (except transiently). NBPDR is quite large (4MB, or 2MB for
PAE).
This fixes spurious traps at the first instruction in VM86 bioscalls.
The traps are for transiently missing read permission in the first
VM86 page (physical page 0) which was just written to at KERNBASE in
the kernel. The mechanism is unknown (it is not simply PG_G).
locore uses a similar but larger transient double mapping and needs
it for 2 instructions instead of 1. Unmap the first PDE in it after
the 2 instructions to detect most garbage pointers while bootstrapping.
pmap_bootstrap() finishes the unmapping.
Remove the avoidance of the double mapping for a recently fixed special
case. ACPI resume could use this avoidance (made non-special) to avoid
any problems with the transient double mapping, but no such problems
are known.
Update comments in locore. Many were for old versions of FreeBSD which
tried to map low memory r/o except for special cases, or might have
allowed access to low memory via physical offsets. Now all kernel
maps are r/w, and removal of of the double map disallows use of physical
offsets again.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Fix from fallout introduced in r322348 that moved the cpus array to a
dynamic allocation without zeroing the area.
Reported by: mjg
MFC with: r322348
Reviewed by: mjg
Differential revision: https://reviews.freebsd.org/D12220
Introduce a new define to take int account the xAPIC ID limit, for
systems where x2APIC is not available/reliable.
Also change some of the usages of the APIC ID to use an unsigned int
(which is the correct storage type to deal with x2APIC IDs as found in
x2APIC MADT entries).
This allows booting FreeBSD on a box with 256 CPUs and APIC IDs up to
295:
FreeBSD/SMP: Multiprocessor System Detected: 256 CPUs
FreeBSD/SMP: 1 package(s) x 64 core(s) x 4 hardware threads
Package HW ID = 0
Core HW ID = 0
CPU0 (BSP): APIC ID: 0
CPU1 (AP/HT): APIC ID: 1
CPU2 (AP/HT): APIC ID: 2
CPU3 (AP/HT): APIC ID: 3
[...]
Core HW ID = 73
CPU252 (AP): APIC ID: 292
CPU253 (AP/HT): APIC ID: 293
CPU254 (AP/HT): APIC ID: 294
CPU255 (AP/HT): APIC ID: 295
Submitted by: kib (previous version)
Relnotes: yes
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11913
So that MAX_APIC_ID can be bumped without wasting memory.
Note that the usage of MAX_APIC_ID in the SRAT parsing forces the
parser to allocate memory directly from the phys_avail physical memory
array, which is not the best approach probably, but I haven't found
any other way to allocate memory so early in boot. This memory is not
returned to the system afterwards, but at least it's sized according
to the maximum APIC ID found in the MADT table.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11912
Populate the lapics arrays and call cpu_add/lapic_create in the setup
phase instead. Also store the max APIC ID found in the newly
introduced max_apic_id global variable.
This is a requirement in order to make the static arrays currently
using MAX_LAPIC_ID dynamic.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11911
Do not try to set LMA bit while CPU is still in legacy mode.
Apparently Intel CPUs ignore non-id writes to LMA, while AMD's
(over-)react with #GP.
Reported and tested by: danfe
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
operation after processor is configured to allow all required
features.
In particular, NX must be enabled in EFER, otherwise load of page
table element with nx bit set causes reserved bit page fault. Since
malloc uses direct mapping for small allocations, in particular for
the suspension pcbs, and DMAP is nx after r316767, this commit tripped
fault on resume path.
Restore complete state of EFER while wakeup code is still executing
with custom page table, before calling resumectx, instead of trying to
guess which features might be needed before resumectx restored EFER on
its own.
Bisected and tested by: trasz
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
Ignore them like it's done in the MADT parser. This allows booting on a box
with SRAT and APIC IDs > 255.
Reported by: Wei Liu <wei.liu2@citrix.com>
Tested by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Citrix Systems R&D
and device npx.
This means that FPU is always initialized and handled when available,
and SSE+ register file and exception are handled when available. This
makes the kernel FPU code much easier to maintain by the cost of
slight bloat for CPUs older than 25 years.
CPU_DISABLE_CMPXCHG outlived its usefulness, see the removed comment
explaining the original purpose.
Suggested by and discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
If BIOS performed hand-off to OS with BSP LAPIC in the x2APIC mode,
system usually consumes such configuration without a notice, since
x2APIC is turned on by OS if possible (nop). But if BIOS
simultaneously requested OS to not use x2APIC, code assumption that
that xAPIC is active breaks.
In my opinion, we cannot safely turn off x2APIC if control is passed
in this mode. Make madt.c ignore user or BIOS requests to turn x2APIC
off, and do not check the x2APIC black list. Just trust the config
and try to continue, giving a warning in dmesg.
Reported and tested by: Slawa Olhovchenkov <slw@zxy.spb.ru> (previous version)
Diagnosed by and discussed with: avg
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Since these pages are allocated from a narrow range of memory, this makes
the allocation more likely to succeed.
Suggested by: kib
Reviewed by: jkim, kib
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7154
If the allocation attempt fails, we may otherwise VM_WAIT after a failed
attempt to reclaim contiguous memory in the requested range. After r297466,
this results in the thread going to sleep, causing a hang during boot.
Reviewed by: jkim, kib
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6945
Instead of panicking when parsing an invalid ACPI SRAT table,
just ignore it, effectively disabling NUMA.
https://lists.freebsd.org/pipermail/freebsd-current/2016-May/060984.html
Reported and tested by: Bill O'Hanlon (bill.ohanlon at gmail.com)
Reviewed by: jhb
MFC after: 1 week
Relnotes: If dmesg shows "SRAT: Duplicate local APIC ID",
try updating your BIOS to fix NUMA support.
Sponsored by: Dell Inc.
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Reviewed by: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5519
