0 - loader hints in environment only;
1 - static hints only
2 - fallback mode (Dynamic KENV with fallback to kernel environment)
Add kern.hintmode write handler, accept only value 2. That will switch
static KENV to dynamic. So it will be possible to change device hints.
Approved by: adrian (mentor)
__BEGIN_DECLS and __END_DECLS in cdefs.h take care of the
__cplusplus mangling issues so most of the definitions
were redundant.
In the few places where they were not redundant we should
use BSD style instead of the guards used upstream.
Reported by: Yuri Pankov
C++ mangling will cause trouble with variables like __rpc_xdr
in xdr.h so rename this to XDR.
While here add proper C++ guards to RPC headers.
PR: 137443
MFC after: 2 weeks
warnings in sys/gnu/fs/xfs. The only warnings that still need to be
suppressed are those about array bound overruns of flexible array
members in xfs_dir2_{block,sf}.c, which are too expensive (in terms of
cascading code changes) to fix.
MFC after: 1 week
X-MFC-With: r239959
MSG_WAITALL is set, and it is possible to do the entire receive
operation at once if we block (resid <= hiwat). Actually it might make
the recv(2) with MSG_WAITALL flag get stuck when there is enough space
in the receiver buffer to satisfy the request but not enough to open
the window closed previously due to the buffer being full.
The issue can be reproduced using the following scenario:
On the sender side do 2 send(2) requests:
1) data of size much smaller than SOBUF_SIZE (e.g. SOBUF_SIZE / 10);
2) data of size equal to SOBUF_SIZE.
On the receiver side do 2 recv(2) requests with MSG_WAITALL flag set:
1) recv() data of SOBUF_SIZE / 10 size;
2) recv() data of SOBUF_SIZE size;
We totally fill the receiver buffer with one SOBUF_SIZE/10 size request
and partial SOBUF_SIZE request. When the first request is processed we
get SOBUF_SIZE/10 free space. It is just enough to receive the rest of
bytes for the second request, and soreceive_generic() blocks in the
part that is a subject of this change waiting for the rest. But the
window was closed when the buffer was filled and to avoid silly window
syndrome it opens only when available space is larger than sb_hiwat/4
or maxseg. So it is stuck and pending data is only sent via TCP window
probes.
Discussed with: kib (long ago)
MFC after: 2 weeks
check it for MT_CONTROL type too, otherwise the assertion
"m->m_type == MT_DATA" below may be triggered by the following scenario:
- the sender sends some data (MT_DATA) and then a file descriptor
(MT_CONTROL);
- the receiver calls recv(2) with a MSG_WAITALL asking for data larger
than the receive buffer (uio_resid > hiwat).
MFC after: 2 week
Fix the strong signal diversity capability setting - I had totally
messed up the indentation.
Set the default values to match what's in the .ini for now, rather than
what values I had previously gleaned from places. This seems to work
quite well for the early AR5212 NICs I have. Of course, later NICs
have different PHYs and the radar configuration is very card/board
dependent..
Tested:
* ath1: AR5212 mac 5.3 RF5111 phy 4.1
ath1: 2GHz radio: 0x0023; 5GHz radio: 0x0017
This detects 1, 5, 25, 50, 75, 100uS pulses reliably (with no interference.)
However, 10uS pulses don't detect reliably. That may be around the
transition between short and long pulses so some further tuning may
improve things.
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
1. Process A pdfork(2)s process B.
2. Process A passes process descriptor of B to unrelated process C.
3. Hit CTRL+C to terminate process A. Process B is also terminated
with SIGINT.
4. init(8) collects status of process B.
5. Process C closes process descriptor associated with process B.
When we have such order of events, init(8), by collecting status of
process B, will call procdesc_reap(). This function sets pd_proc to NULL.
Now when process C calls close on this process descriptor,
procdesc_close() is called. Unfortunately procdesc_close() assumes that
pd_proc points at a valid proc structure, but it was set to NULL earlier,
so the kernel panics.
The patch also adds setting 'p->p_procdesc' to NULL in procdesc_reap(),
which I think should be done.
MFC after: 1 week
After I made the previous commit, I noticed the code does some things it
shouldn't. It casts a struct timeval to a time_t, assuming tv_sec is the
first member. Also, we are not interested in microseconds, so it is
better to just call time(NULL).
MFC after: 1 month
up on (at least) the AR5413.
The 30 second summary - if a CRC error frame comes in during PHY error
processing, that CRC bit will be set for all subsequent frames until
a non-CRC error frame is processed.
So to allow for accurate PHY error processing (Radar, and ANI on the AR5212
HAL chips) just tag the frame as being both CRC and PHY - let the driver
decide what to do with it.
PR: kern/169362
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____
Fixed infinite loop in svc_run()
author Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____
__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____
Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____
Converted all uid and gid variables of the type uid_t and gid_t.
author Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____
libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.
rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
author Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)
Obtained from: Bull GNU/Linux NFSv4 Project
MFC after: 3 weeks
encounters a DT_RUNPATH entry, the global dynamic_info[] array is
overrun, causing some other global variable to be overwritten.
In my testcase, this was the section_headers variable, leading to
segfaults or jemalloc assertions when it was freed later on.
Thanks to Koop Mast for providing samples of a few "bad" .so files.
MFC after: 1 week
In addition to testing against cxx_atomic, we must check c_atomic. The
former is only set when building C++ code. Also use __has_extension
instead of __has_feature. This allows us to use the atomics outside of
C11.
Reported by: Ariane van der Steldt <ariane stack nl>
PR: threads/170073
linking it statically into the kernel. With our gcc in base there are
no warnings, so also remove the WERROR= from the module makefile.
Noted by: Eir Nym <eirnym@gmail.com>
MFC after: 1 week
firmware objects by adding --no-warn-mismatch to the linker flags,
add --no-warn-mismatch when linking firmware objects (*.fwo) as
well as to the link of the main kernel file. This permits firmware
modules to be statically linked into an ia64 kernel.
uudecode, and NORMAL_FWO to use ld to build the .fwo file) and use those
instead of explicit ld/uudecode invocations in sys/conf/files. Apart from
increasing readability, this makes it possible to adjust the flags used for
firmware objects in one place.
MFC after: 2 weeks
Though the license of the original ac(8) source code provides many
liberties, we are already somewhat violating it. The license requires us
to clearly comment any modifications to the source code, as the original
authors of course do not want to get bug reports for modified versions
of ac(8). This is something we have not done consistently.
The need for such a license clause has become less over time. It is very
unlikely that end users will contact the original authors, as the
copyright is from 1994. I contacted both the copyright holders. They
responded in a timely fashion and were more than willing to relicense it
to a 2-clause BSD license. To address any concerns about bug reports
going to the original authors instead of me, add my own name and email
address to the copyright statements as well.
MFC after: 1 month
Special thanks to: Christopher Demetriou and Simon Gerraty
symbolic link to a directory for the target as a symbolic link instead of
a directory. This makes it possible to atomically update a symbolic
link using rename().
Reviewed by: gj
MFC after: 2 weeks
this case, allocate a plain mbuf and copy the frame into it, then send the
copy up the stack, leaving the original mbuf+cluster in place in the
receive ring for immediate re-use. This saves a trip through 2 of the
3 zones of the compound mbuf allocator, a trip through busdma, and a trip
through the 1 of the 3 mbuf destructors. For our load at Netflix, this can
lower CPU consumption by as much as 20%. The copy algorithm is based on
investigative work from Luigi Rizzo earlier in the year.
Reviewed by: jfv
Obtained from: Netflix
