When the AHCI code was reworked to use FreeBSD struct
definitions, the valid element was mis-transcribed resulting
in the UMDA capability being hidden. This prevented Illumos
from using AHCI disk/cdrom drives.
Fix by using definitions that match the code pre-rework.
PR: 250924
Submitted by: Rolf Stalder
Reported by: Rolf Stalder
MFC after: 3 days
Sometimes users want to use freebsd-update(8) in a non-interactive way and
what they often miss is that they have to set PAGER to cat(1) in order to
avoid interactive prompts from less(1).
MFC after: 4 weeks
Since lots of work has been done on bhyve since 2014, increase the version
to 13.0 to match 13-CURRENT, and update the release date.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D27147
In standards such as LoPAPR, property names in excess of the usual 31
characters exist.
This breaks property traversal.
While in IEEE 1275-1994, nextprop is defined explicitly to work with a
32-byte region of memory, using a larger buffer should be fine. There is
actually no way to pass a buffer length to the nextprop call in the OF
client interface, so SLOF actually just blindly overflows the buffer.
So we have to defensively make the buffer larger, to avoid memory
corruption when reading out long properties on live OF systems.
Note also that on real-mode OF, things are pretty tight because we are
allocating against a static bounce buffer in low memory, so we can't just
use a huge buffer to work around this without it being wasteful of our
limited amount of 32-bit physical memory.
This allows a patched ofwdump to operate properly on SLOF (i.e. pseries)
systems, as well as any other PowerPC systems with overlength properties.
Reviewed by: jhibbits
MFC after: 2 weeks
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26669
Read CPUID leaf 0x8000008 to determine max supported phys address and
create BAR region right below it, reserving 1/4 of the supported guest
physical address space to the 64bit BARs mappings.
PR: 250802 (although the issue from PR is not fixed by the change)
Noted and reviewed by: grehan
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D27095
Specifically this was causing the /dev/klog fd and the signal pipe
handling fd to get a sendmsg(2) called on them and always returned
[ENOTSOCK].
r310350 combined these sockets into the main socket list and properly
skipped AF_UNSPEC at the sendmsg(2) call but later in r344739 it was
broken such that these special sockets were no longer excluded since
the AF_UNSPEC check specifically excluded these special sockets. Only
these special sockets have sl_sa = NULL. The sl_family checks should
be redundant now but are left in case of future changes so the intent
is clearer.
MFC after: 2 weeks
- Bad whitespace in Makefile.
- Reordered headers, sys/ first.
- Annotated fatal/usage __dead2 to help `make analyze` out a little bit.
- Spell a couple of sizeof constructs as "nitems" and "howmany" instead.
MFC after: 1 week
If bhyve is used to emulate 512e access in guest OS, then discard addresses should be properly aligned.
Otherwise ioctl DIOCGDELETE fails for 512b requires on devices with 4K sector size.
see g_dev_ioctl() in sys/geom/geom_dev.c
Submitted by: Vitaliy Gusev <gusev.vitaliy@gmail.com>
MFC after: 1 week
Sponsored by: vStack.com
Differential Revision: https://reviews.freebsd.org/D27075
The existing format string for the empty case was trying to read varargs
values that weren't passed to xo_emit. This appears to work on x86 (since
the next argument is probably a pointer an empty string), but for CHERI
we can bound variadic arguments and detect a read past the end.
While touching these lines also use the libxo 'a' modifier to avoid having to
construct the libxo format string using asprintf.
Found by: CHERI
Reviewed By: allanjude
Differential Revision: https://reviews.freebsd.org/D26885
"smbios.system.family" as " ".
This presents challenges for both humans and tools when trying to parse output
that uses those results.
The new values reported are now:
smbios.system.family="Virtual Machine"
smbios.system.maker="FreeBSD"
PR: 250728
Approved by: grehan@FreeBSD.org
Sponsored by: Netflix
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
Literal references to /usr/local exist in a large number of files in
the FreeBSD base system. Many are in contributed software, in configuration
files, or in the documentation, but 19 uses have been identified in C
source files or headers outside the contrib and sys/contrib directories.
This commit makes it possible to set _PATH_LOCALBASE in paths.h to use
a different prefix for locally installed software.
In order to avoid changes to openssh source files, LOCALBASE is passed to
the build via Makefiles under src/secure. While _PATH_LOCALBASE could have
been used here, there is precedent in the construction of the path used to
a xauth program which depends on the LOCALBASE value passed on the compiler
command line to select a non-default directory.
This could be changed in a later commit to make the openssh build
consistently use _PATH_LOCALBASE. It is considered out-of-scope for this
commit.
Reviewed by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26942
Describe "diff installed new" as "Displaying differences between
installed and new." Previously mergemaster described them in the
opposite order.
PR: 249214
Reported by: Yuri Victorovich
MFC after: 2 weeks
rpcbind is now considered a security risk for some sites.
Since an NFSv4 only NFS server does not need rpcbind,
it makes sense to have an option that implements this.
This patch adds a "-R" option that disables the Mount
protocol (not used by NFSv4) and does not register
with rpcbind.
Changes are required to /etc/rc.d/mountd and /etc/rc.d/nfsd.
Those will be in a separate commit.
Reviewed by: freqlabs, asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26746
Mak the Ethernet PCP codepoint configurable
for L2 local traffic, to allow lower latency for
iSCSI block IO. This addresses the target
side only.
Reviewed by: mav, trasz, bcr
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26740
Make the Ethernet PCP codepoint configurable
for L2 local traffic, to allow lower latency for
iSCSI block IO. This addresses the initiator
side only.
Reviewed by: mav, trasz, bcr
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26739
It does not change anything immediately, but allows further support of
Command Priority, Status Qualifier and new task management functions.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
efivar_unix_path_to_device_path returns the error code, it does not set errno.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26852
bhyve sometimes segfaults when using an e1000 NIC with a Windows guest.
We are only updating our tdba and cached host mapping when the low address
register is written and when tx is set enabled, but not when the high address
or length registers are written. It is observed that Windows 10 is occasionally
enabling tx first then writing the registers in the order low, high, len. This
leaves us with a bogus base address and mapping, which causes a segfault later
when we try to copy from a descriptor that has unpredictable garbage in a
pointer.
Updating the address and mapping when any of those registers change seems to fix
that particular issue.
Reviewed by: mav, grehan (bhyve)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26798
We convert a string like "W32:vendor/device" into "I:vendor;I:device",
where the output is longer than the input, but only allocate space equal
to the length of the input, leading to a buffer overflow.
Instead use open_memstream so we get a safe dynamically-grown buffer.
Found by: CHERI
Reviewed by: imp, jhb (mentor)
Approved by: imp, jhb (mentor)
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D26637
This with the previous patch I committed makes traceroute6/traceroute
compile fine when libcasper isn't enabled.
This complains strongly with unused variables and such when compiled
with gcc-6 on mips32.
Tested:
* compiled/run on mips32 hardware (AR9344)
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D26773
Remove quotes around size in the LUN section and change the suffix to 'GB'. The
UCL format does recognize 'G' on its own, which uses a base 10 multiplier where
'GB' uses a 2 power multiplier.
Document the difference between valid suffixes when using ctl.conf(5) in the
general syntax form or in UCL format.
Reviewed by: kevans, mav
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D26716
r362163 upgraded mountd so that it could handle MAX_NGROUPS
groups for the anonymous user credentials (the ones provided by
-maproot and -mapall exports options).
The problem is that this resulted in every export structure growing by
about 4Kbytes, because the cr_groups field went from 16->MAX_NGROUPS.
This patch fixes this by only including a small 32 element cr_groups in the
structure and then malloc()'ng cr_groups when a larger one is needed.
The value of SMALLNGROUPS is arbitrarily set to 32, assuming most users
used by -maproot or -mapall will be in <= 32 groups.
Reviewed by: kib, freqlabs
Differential Revision: https://reviews.freebsd.org/D26521
Allow the DSCP codepoint also to be configurable
for the traffic in the direction from the initiator
to the target, such that writes and any requests
are also treated in the appropriate QoS class.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26714
- no blank before trailing delimiter
- whitespace at end of input line
- sections out of conventional order
- normalizing date format
- AUTHORS section without An macro
Too many version of UEFI firmware (so far only confirmed on amd64)
don't really support efibootmgr selection of boot. That's the most
reliable, when it works, since there's no guesswork. However, many do
not save, unmolested, the variables that efibootmgr sets, so as a
fallback we also install loader.efi as bootXXX.efi (where XXX is
either aa64 or x64) if it doesn't already exist in /efi/boot on the
ESP. The standard only defines this for removable devices, but it's
almost ubiquitously used as a fallback. Many BIOSes implement a drive
selection feature that takes over the efibootmgr protocol, rendinering
it useless (either generally, or for those vendors not on the short
list). bootxxx.efi works around this. However, we don't install it
unconditionally there, as that breaks some popular multi-boot setups.
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D26428
The method was optional prior to r365938, which made it mandatory but did add
any test that an implementation provides the method nor implement it for
bhyveload. The code path might not be hit unless the user's loader was
configured to write to a file on disk, such as with nextboot(8).
Reviewed by: grehan, tsoome
Approved by: bhyve
X-MFC-With: r365938
Differential Revision: https://reviews.freebsd.org/D26710
r364166 converted echo -n `/bin/pwd` to a raw pwd invocation, leaving a
trailing newline at the end of path. This caused a later stat() of it to
erroneously fail and the fallback to MK_AUTO_OBJ=no logic proceeded as
unexpected.
Harry Schmalzbauer bissected the resulting build failure he experienced
(stable/12 host, -HEAD build) down to r365887. This change is mostly
unrelated, except it switches the build to bootstrapped crunchgen - clue!
I then bissected recent crunchgen changes going back a bit since we wouldn't
observe the failure immediately with -CURRENT in most configurations, which
landed me on r364166. After many intense head-scratching minutes and printf
debugging, I realized that the newline was the difference. This is where our
tale ends.
Reported by: Harry Schmalzbauer, O. Hartmann, Mike Tancsa, kevans
MFC after: 3 days
The output of "ngctl dot" is suitable for small netgraph networks. Even
moderate complex netgraph setups (about a dozen nodes) are hard to
understand from the .dot output, because each node and each hook are shown
as a full blown structure.
This patch allows to generate much more compact output and graphs by
omitting the extra structures for the individual hooks. Instead the names of
the hooks are labels to the edges.
Submitted by: Lutz Donnerhacke <lutz_donnerhacke.de>
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21965
VirtFS allows sharing an arbitrary directory tree between bhyve virtual
machine and the host. Current implementation has a fairly complete support
for 9P2000.L protocol, except for the extended attribute support. It has
been verified to work with the qemu-kvm hypervisor.
Reviewed by: rgrimes, emaste, jhb, trasz
Approved by: trasz (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Conclusive Engineering (development), vStack.com (funding)
Differential Revision: https://reviews.freebsd.org/D10335
'ident' was replaced with 'ata_ident' in revision r363596.
Submitted by: Vitaliy Gusev <gusev.vitaliy_gmail.com>
Reviewed by: Darius Mihai
Differential Revision: https://reviews.freebsd.org/D26263
running kernel instead of the stats of the crashed kernel. The current
version uses sysctls to query the stats and does not work at all (anymore)
on crash dumps.
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
In order to prioritize iSCSI traffic across a network,
DSCP can be used. In order not to rely on "ipfw setdscp"
or in-network reclassification, this adds the dscp value
directly to the portal group (where TCP sessions are accepted).
The incoming iSCSI session is first handled by ctld for any
CHAP authentication and the socket is then handed off to the
in-kernel iscsi driver without modification of the socket
parameters. Simply setting up the socket in ctld is sufficient
to keep sending outgoing iSCSI related traffic with the
configured DSCP value.
Reviewed by: mav, trasz
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26385
Prune dead mirrors from the list of mirrors in bsdconfig and bsdinstall.
All these return NXDOMAIN when trying to resolve them.
Reviewed by: emaste
Approved by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26535
When the DEVICE_PATH is <= 4 that means it's effectively empty. I have
a laptop that has a BIOS that likes to generate these:
8be4df61-93ca-11d2-aa0d-00e098032b8c-Boot2001
0000: 01 00 00 00 04 00 45 00 46 00 49 00 20 00 55 00
0010: 53 00 42 00 20 00 44 00 65 00 76 00 69 00 63 00
0020: 65 00 00 00 7f ff 04 00 52 43
which now decodes as
8be4df61-93ca-11d2-aa0d-00e098032b8c-Boot2001
* EFI USB Device
Empty path
Option:
0000: 52 43
which matches my hand-decode.
Add an extra newline after Option: to make it look nice.
I suspect that these entries really should be VenHw entries instead,
but my ability to change that is NIL, so cope with them as best we can.
efibootmgr(8)'s output is fine and doesn't need adjusting.
For a long period value and the duty specified as a percentage,
there could be an overflow.
Using unsigned integers aligns the code with struct pwm_state and allows
to safely use periods up to 4 seconds where supported by drivers.
MFC after: 2 weeks
received.
The default system log rotation mechanism (newsyslog(8)) requires ability to send
signal to a daemon in order to properly complete rotation of the logs in an "atomic"
manner without having to making a copy and truncating original file. Unfortunately
our built-in mechanism to convert "dumb" programs into daemons has no way to handle
this rotation properly. This change adds this ability, to be enabled by supplying -H
option in addition to the -o option.
Reviewed by: markj, rpokala (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26526
* powerpc time_t is 64 bit, not 32 bit.
* Add definition for powerpc64le.
With this, powerpc64le ntpd and ntpdate operate correctly instead of
corrupting the clock and exiting.
Tested on powerpc64, powerpc64le, and powerpc.
No feedback from cy@.
I am a bit confused as to how SIZEOF_TIME_T being wrong ever worked on
powerpc, it being big endian and all.
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26379
This fixes a compile issue under gcc6 which complains about
legacy style C function declarations.
Differential Revision: https://reviews.freebsd.org/D26504
This allows us to redirect its output in cmd_cron, so that the
"src component not installed, skipped" message will be treated
the same way as other output from freebsd-update cron: Sent
in an email to root (or other address specified) if there are
updates to install, and silenced otherwise.
PR: 202492
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D26432
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
The language id of String Descriptors in usb mouse is
0x0904, while the spec require 0x0409 (English - United States)
Submitted by: Wanpeng Qian
Reviewed by: grehan
Approved by: grehan (#bhyve)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26472
As of r365829, any given base distribution set will now include the /etc/ssl
symlinks that this rehash would've otherwise installed. This extra step is
no longer required.
MFC after: 1 week
X-MFC-With: r365837
Don't permit setting the exception bitmap or VMCS entry interrupt
information. These are not generally useful to set. If it is needed
in the future, dedicated pseudo registers can be added for these that
would be used with vm_set_register().
Discussed with: grehan
MFC after: 1 week
The first issue was lack of quoting around INSTALLFLAGS, which set it
incorrectly and produced an error on -M.
The second issue was that we weren't actually doing the install in
unprivileged mode, making it effectively useless. This was designed to pass
through the proper metalog/unpriv flags to install(1), so just let it
happen.
MFC after: 3 days
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
This was revealed by the rescue build with a patch I'm working on to default
WARNS=6 everywhere. The issues resolved were:
- Missing prototype for _crunched_${ident}_stub in the *_stub.c generated
bits
- Missing prototype for crunched_main
- Incomplete prototype for _crunched_${ident}_stub in the generated parts of
crunched_main
- Literal strings in the stub table must drop const qualifier, unless we
const'ify name
- f field in struct stub didn't have a proper prototype
Most of these issues are minor formalities and easily addressed.
I note that if my patch to eventually raise WARNS for the rescue build
lands, we'll need to bump the __FreeBSD_version requirement for
bootstrapping crunchgen and wipe out the rescue .OBJDIR if it's stale, which
we should be able to detect pretty easily from a couple of the issues that
have been fixed here.
Reviewed by: arichardson
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26363
Currently, certctl rehash will just keep clobbering .0 rather than
incrementing the suffix upon encountering a duplicate. Do this, and do it
for blacklisted certs as well.
This also improves the situation with the blacklist to be a little less
flakey, comparing cert fingerprints for all certs with a matching subject
hash in the blacklist to determine if the cert we're looking at can be
installed.
Future work needs to completely revamp the blacklist to align more with how
it's described in PR 246614. In particular, /etc/ssl/blacklisted should go
away to avoid potential confusion -- OpenSSL will not read it, it's
basically certctl internal.
PR: 246614
Reviewed by: Michael Osipov <michael.osipov siemens com>
Tested by: Michael Osipov
With suggestions from: Michael Osipov
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26167
Currently, WITHOUT_PORTSNAP forces WITHOUT_FREEBSD_UPDATE because the
latter relies on phttpget, which lives inside the portsnap build bits.
Remove the dependency between these two options by moving phttpget out into
^/libexec and building/installing it if either WITH_PORTSNAP or
WITH_FREEBSD_UPDATE.
Future work could remove the conditional if it's decided that users will use
it independently of either the current in-base consumers.
Reported by: swills
Reviewed by: jilles, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26255
Just using MD5, SHA1, RMD160 and SHA256 for defines collides with
functions of the same name in OpenSSL. This can cause compilation
issues in downstream consumers if they use OpenSSL for the hash
functions instead of libmd.
Reviewed by: sjg
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D26321
The caller-supplied pointer is unconditionally dereferenced at the
beginning of the function, so there is no point in comparing it with
NULL thereafter.
Reported by: Coverity
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
from the kernel, but let's try to be on the safe side.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26246
the wrong length to strlcpy(3). It looks like it could overflow into
the next field, isc_user, which is properly long to accomodate for it;
I don't think it could cause any harm other than breaking the connection.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26247
Three new export flags are added to mountd that will restrict exported
file system mounts to use TLS. Without these flags, TLS is allowed, but not
required.
The exports(5) man page will be updated in a future commit.
clash, or redefining name/jid). The current behvaior, of merely warning
and moving on, can lead to unexpected behavior when a jail is created
without the offending parameter defined at all.
The OsIndications UEFI variable can request the firware to stop at
its UI instead of continuing with boot. Add flags for setting and
clearing this request.
Reviewed by: manu, bcr (manpages)
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D25839
While we do support the "O bit" running a script (usually to start a
dhcpv6 client) we have no options for setups which set the "M bit" for,
e.g., static address assignment as in EC2.
Duplicate most of the "O bit" logic to also start a script for the
"M bit" with the one difference: if the "M bit" is set we will not
start the script for the "O bit" as well (per RFC 4861, Section 4.2).
Reviewed by: hrs, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26099
The macOS assert.h header does not define static_assert when compiling in
C99 mode. To fix this compile with -std=c11.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25928
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
That mode is useful to call gstat from other app, however kinda useless
since gstat won't exit and stay running forever when its parent process
has long gone.
MFC after: 2 weeks
The added print was very helpful for debugging failed disk image creation.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D23200
This should fix cases like su setting argv[0] to _su for /bin/sh.
Previously cheribsdbox (a crunched tool we use in CheriBSD to reduce the
size of our minimal disk images to allow loading them onto FPGAs without
waiting forever for the transfer) would complain about _su not being
compiled in, but now that we also look at AT_EXECPATH it correctly
invokes the sh tool.
Note: we use use AT_EXECPATH instead of the KERN_PROC_PATHNAME sysctl to get
the crunchgen binary name since it seems like KERN_PROC_PATHNAME just
returns the last cached path for a given hardlink.
When using `su`, instead of invoking /bin/csh this would invoke the last
used hardlink to cheribsdbox. This caused weird test failures when running
tests due to `id` being executed instead of `echo`:
$ id # id is a hardlink to /bin/cheribsdbox
$ su postgres -c 'echo 1' # su is also a hardlink
uid=1001(postgres) gid=1001(postgres) groups=1001(postgres)
Obtained from: CheriBSD
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D25998
The NVMe emulation code did not explicitly initialize queue head and
tail pointers on queue creation. As these pointers are part of
calloc()'ed memory, this only becomes a problem if the queues are
deleted and then recreated.
This error can manifest with messages about completions not matching a
command.
Some operating systems believe bhyve's emulated NVMe drive is failing
based on certain values in the SMART / Health Information log page being
zero. Fix is to set the reported temperature and available spare values
to reasonable defaults.
Submitted by: wanpengqian@gmail.com
Reviewed by: grehan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24202
- Remove trailing whitespace
- Address igor and mandoc warnings
- Sort options
- Use macros consistently (e.g., Fl for flags, Dq for quoting, Bd for code
blocks)
- Add a history section
- Fix incorrect use of macros in various places
MFC after: 2 weeks
supposedly having too many segments, when lld 11 links it. Such kernels
should load just fine.
Note that we may still do some tweaking of our kernel linker scripts, to
lower the number of segments, although the exact benefit is not entirely
clear.
"ipdata.meta.pfs_type & HAMMER2_PFSTYPE_SUPROOT" happened to have
the same result (except HAMMER2_PFSTYPE_DUMMY could also match).
Obtained from: Dragonfly (git 29e6489bbd4f8e237c9c17b300ac8b711f36770)
The command would only work if PWD happened to be WORKDIR.
Also, exit 1 in case WORKDIR exists, but isn't accessible
by the current user.
PR: 242709
Reported by: Max Fiedler
MFC after: 1 week
The -P flag is required by POSIX so we don't have to care whether pwd is
a shell builtin or not. This also allows removing pwd from the list of
bootstrap tools since all shells we care about for building have a
builtin pwd command. This effectively reverts r364190.
Suggested By: rgrimes, jrtc27
In r364166 I changed /bin/pwd to pwd, but pwd can be shell builtin that
may not correctly return a real path. To ensure that all symlinks are
resolved use `env pwd -P` instead (the -P flag is part of POSIX so
should be supported everywhere).
Reported By: rgrimes
Suggested By: jrtc27
On Glibc systems mkstemp can only be used once with the same template
string since it will be modified in-place and no longer contain any 'X' chars.
It is fine to reuse the same file here but we need to be explicit and use
open() instead of mkstemp() on the second use.
While touching this file also avoid a hardcoded /bin/pwd since that may not
work when building on non-FreeBSD systems.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D25990
My change to allow bootstrapping pwd_mkdb (r363992) resulted in i386 build
failures because the bootstrap header was being included in non-bootstrap chpass.
Dropping the no longer required pwd_mkdb include path from chpass fixes
the build, but to be certain that the failure doesn't get re-introduced,
I've also moved the bootstrap pwd.h into a subdirectory so that adding
-I${SRCTOP}/usr.sbin/pwd_mkdb doesn't pull it in.
Reported by: mjg
This breaks the build on macOS where this header doesn't exist. I could
also add a compat header to tools/build/cross-build but since it's not
needed removing it seems like the better solution.
We need to provide a struct passwd that is compatible with the target
system and this is not the case when cross-building from macOS/Linux.
It should also be a problem when bootstrapping for an i386 target from a
FreeBSD amd64 host since time_t does not match across those systems.
However, pwd_mkdb always truncates integer values to 32-bit so this
difference does not result in different databases.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D25931
usr.sbin/yp_mkdb/yp_mkdb.c:91:40: error: format specifies type 'char *' but the argument has type 'void *' [-Werror,-Wformat]
printf("%.*s %.*s\n", (int)key.size, key.data, (int)data.size,
~~~~ ^~~~~~~~
usr.sbin/yp_mkdb/yp_mkdb.c:92:7: error: format specifies type 'char *' but the argument has type 'void *' [-Werror,-Wformat]
data.data);
^~~~~~~~~
MFC after: 3 days
It allows to report to initiator LU identifying information, preset via
"ident_info" and "text_ident_info" options.
Unfortunately it is impossible to implement SET IDENTIFYING INFORMATION,
since we have no persistent storage it requires, so the information is
read-only for initiator and has to be set out-of-band.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The -I option (and hotkey) is reused for this. Skipping symbol resolution is
moved to the new -A option (and hotkey).
While arguably this violates POLA I think it's a change for the better.
ALso note the -I option was added in head.
Differential Revision: https://reviews.freebsd.org/D21658
Linux glibc has a dummy lchmod that always fails and emitting a linker
warning when used. Don't fail the build due to that warning when
bootstrapping by setting LD_FATAL_WARNINGS=no.
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25930
Before switching to nvlists CTL merged previous and new options, so
any options not passed just kept previous value. Now CTL completely
replaces them, so we must pass everything still relevant.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Allow the serial number, firmware revision, model number and nominal media
rotation rate (nmrr) parameters to be set from the command line.
Note that setting the nmrr value can be used to indicate the AHCI
device is an SSD.
Submitted by: Wanpeng Qian
Reviewed by: jhb, grehan (#bhyve)
Approved by: jhb, grehan
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24174
Way back in r28911 (August 1997, CVS rev 1.22) we imported a NetBSD
information leak fix via OpenBSD. Unfortunatly we failed to track the
followup commit that fixed the type of the error code. Apply the change
from int to long now.
Reviewed by: emaste
Found by: CHERI
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25779
This happens when there's only one component (e.g. "/foo"). This
(mostly-harmless) bug has been present since June 1990 when it was
commited to mountd.c SCCS version 5.9.
Note: the bug is on the second changed line, the first line is changed
for visual consistency.
Reviewed by: cem, emaste, mckusick, rmacklem
Found with: CHERI
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25759
Right now, the bootstrap will gloss over things like pkg bootstrap -x or
pkg bootstrap -f pkg. Make it more clear that this is incorrect, and hint
at the correct formatting.
Reported by: jhb (IIRC via IRC)
Approved by: bapt, jhb, manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24750
Fix some style issues as well. Leave -Wno-cast-aligned set for now, as
most of the warnings come casts of CMSG_DATA(), which does provide
sufficient alignment in practice.
Submitted by: Shubh Gupta <shubh@freebsd.org>
Sponsored by: Google (GSOC 2020)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25603
Optionally, alert you if the contents change from the previous backup
PR: 86388
Submitted by: Rob Fairbanks <rob.fx907@gmail.com>, Miroslav Lachman <000.fbsd@quip.cz> (Original Version)
MFC after: 4 weeks
Relnotes: yes
Sponsored by: Klara Inc.
Event: July 2020 Bugathon
Differential Revision: https://reviews.freebsd.org/D25628
This fixes a coredump with NetBSD guests when XHCI is configured.
On seeing the AC64 flag clear, the NetBSD XHCI driver was only writing
to the lower 32-bits of 64-bit physical address registers. The emulation
relies on a write to the hi 32-bits to calculate a host virtual address
for internal use, and has always supported 64-bit addressing.
All other guests were seen to write to both the lo- and hi- address
registers, regardless of the AC64 setting.
Discussed with: Leon Dang (author)
Tested with: Ubuntu 16/18/20, Windows10, OpenBSD UEFI guests.
MFC after: 2 weeks.
Allow guests to set the RTC bit in the ACPI PM control register.
This eliminates an annoying (and harmless) Linux kernel boot message.
PR: 244721
Submitted by: Jose Luis Duran
MFC after: 1 week
The NVMe specification requires unused entries in the Identify, Active
Namespace ID data to be zero. Fix is bzero the provided page, similar to
what is done for the Namespace Descriptors list.
Fixes UNH Tests 2.6 and 2.9
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24901
Dataset Management range specifications may have a zero length (a.k.a.
an empty range definition). Handle the case of all ranges being empty by
completing with Success (DSM commands are advisory only). For
Deallocate, skip empty range definitions when sending TRIM's to the
backing storage.
Fixes UNH Test 2.2.4
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24900
If the Predictable Latency Mode is not supported, NVMe Controllers must
return Invalid Field in Command status for the Get Features command
with IDs:
- Predictable Latency Mode Config
- Predictable Latency Mode Window
Fixes UNH Tests 3.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24899
This adds support for NVMe Get Features, Interrupt Vector Config
parameter error checking done by the UNH compliance tests.
Fixes UNH Tests 1.6.8 and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24898
This commit updates the Identify Controller data to advertise the
Controller supports a single firmware slot and that firmware slot 1 is
read-only. Additionally, it returns an "Invalid Firmware Slot" error
when the host issues any Firmware Commit command (a.k.a. Firmware
Activate).
Fixes UNH Test 5.5.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24897
This adds support to bhyve's NVMe device emulation for processing Async
Event Requests but not returning them (i.e. Async Event Notifications).
Fixes UNH Test 5.5.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24896
Add checks that the combination of Starting LBA and Number of Logical
Blocks in a command will not exceed the range of the underlying storage.
Note that because NVMe specifices the Starting LBA as a uint64_t, care
must be taken when converting it and the block count to avoid an integer
overflow.
Fixes UNH Tests 2.2.3, 2.3.2, and 2.4.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24895
SMART data in NVMe includes statistics for number of read and write
commands issued as well as the number of "data units" read and written.
NVMe defines "data unit" as thousands of 512 byte blocks (e.g. 1 data
unit is 1-1,000 512 byte blocks, 3 data units are 2,001-3,000 512 byte
blocks).
This patch implements counters for:
- Data Units Read
- Data Units Written
- Host Read Commands
- Host Write Commands
and exposes the values when the guest reads the SMART/Health Log Page.
Fixes UNH Test 1.3.8
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24894
For NVMe emulation, validate the Data Set Management LBA ranges do not
exceed the capacity of the backing storage. If they do, return an "LBA
Out of Range" error.
Fixes UNH Test 2.2.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24893
NVMe controllers advertise their Max Data Transfer Size (MDTS) to limit
the number of page descriptors in an I/O request. Take advantage of this
and size the struct pci_nvme_ioreq accordingly.
Ensuring these values match both future-proofs the code and allows
removing some complexity which only exists to handle this possibility.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24891
Split the NVM I/O function (i.e. nvme_opc_write_read) into separate
functions - one for RAM based backing-store and another for disk based
backing-store for easier maintenance. No functional changes.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24890
The Format NVM command mainly allows the host to specify the block size
and protection information used for the Namespace. As the bhyve
implementation simply maps the capabilities of the backing storage
through to the guest, there isn't anything to implement. But a side
effect of the format is the NVMe Controller shall not return any data
previously written (i.e. erase previously written data). This patch
implements this later behavior to provide a compliant implementation.
Fixes UNH Test 1.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24889
Create a generic Get/Set Features by saving off the contents of CDW11
from the Set command and returning the saved value in the completion of
the Get command. Implementation allows providing optional implementation
for both Set and Get.
Add infrastructure to determine which feature ID's are namespace
specific and flag violations of this category of error.
Also adds the feature specific behavior of Set Features, Number of
Queues to only allow this command once per Controller reset.
Fixes UNH Tests 1.2, 5.4, and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24887
Fix the logic in nvme_opc_get_log_page to calculate the number of DWORDS
(uint32_t) instead of WORDS (uint16_t) for the byte length. And only
return the allowed number of Log Page bytes as determined by the user
request and actual size of the requested log page.
Fixes UNH Test 1.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24885
Consolidate the code which writes Completion Queue entries and updates
the CQ doorbell value. While in the neighborhood, convert the "toggle CQ
phase bit" code to use an XOR operation instead of an "if/else" branch.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24882
The NVMe code attempted to ensure thread safety through a combination of
using atomics and a "busy" flag. But this approach leads to unavoidable
race conditions.
Fix is to use per-queue mutex locks to ensure thread safety within the
queue processing code. While in the neighborhood, move all the queue
initialization code to a common function.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19841
This adds support for the NVMe I/O command Flush. For block-based
devices, submit a DIOCGFLUSH to the backing storage. Otherwise, command
is treated like a NOP and completes with a Successful status.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24880
This refactors the NVMe I/O command processing function to make adding
new commands easier. The main change is to move command specific
processing (i.e. Read/Write) to separate functions for each NVMe I/O
command and leave the common per-command processing in the existing
pci_nvme_handle_io_cmd() function.
While here, add checks for some common errors (invalid Namespace ID,
invalid opcode, LBA out of range).
Add myself to the Copyright holders
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24879
Convert the debug and warning logging macros to be parameterized and
correctly use bhyve's PRINTLN macro.
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24878
but in System III in the AT&T world.
Examination of the TUHS archives shows this was present in 4.3-Reno
and System III.
Reviewed by: 0mp@, allanjude@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D25479
If the interfaces on which wpa_supplicant is to run are not known or do
not exist, wpa_supplicant can match an interface when it arrives. Each
matched interface is separated with -M argument and the -i argument now
allows for pattern matching.
As an example, the following command would start wpa_supplicant for a
specific wired interface called lan0, any interface starting with wlan
and lastly any other interface. Each match has its own configuration
file, and for the wired interface a specific driver has also been given.
wpa_supplicant \
-M -c wpa_wired.conf -ilan0 -D wired \
-M -c wpa1.conf -iwlan* \
-M -c wpa2.conf
PR: 247177
Reported by: greg@unrelenting.technology
MFC after: 1 month
Related to: ports r540412
The TRB processing loop could potentially call a back-end twice
with the same status transaction. While this was generally benign,
some code paths in the tablet backend weren't set up to handle
this case, resulting in a NULL dereference.
Fix by
- returning a STALL error when an invalid request was seen in the backend
- skipping a call to the backend if the number of packets in a status
transaction was zero (this code fragment was taken from the Intel ACRN
xhci backend)
PR: 246964
Reported by: Ali Abdallah
Discussed with: Leon Dang (author)
Reviewed by: jhb (#bhyve), Leon Dang
Approved by: jhb
Obtained from: Intel ACRN (partially)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25228
Introduce -D flag that allows for the VM to be destroyed on guest initiated
power-off by the bhyve(8) process itself.
This is quality of life change that allows for simpler deployments without
the need for bhyvectl --destroy.
Requested by: swills
Reviewed by: 0mp (manpages), grehan, kib, swills
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25414
If userspace has a newer bhyve than the kernel, it may be able to decode
and emulate some instructions vmm.ko is unaware of. In this scenario,
reset decoder state and try again.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24464
Update 4.2.8p14 --> 4.2.8p15
Summary: Systems that use a CMAC algorithm in ntp.keys will not release
a bit of memory on each packet that uses a CMAC keyid, eventually causing
ntpd to run out of memory and fail. The CMAC cleanup from
https://bugs.ntp.org/3447, part of ntp-4.2.8p11, introduced a bug whereby
the CMAC data structure was no longer completely removed.
MFC after: 3 days
Security: NTP Bug 3661
The current message when bootstapping pkg fails for any reason implies that pkg
is not available. We have the error code from fetch so if bootstrap failed due
to address resolution say so.
Reviewed by: bapt, bz
Approved by: bz (co-mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D25323
fs_summary_info structure. This change was originally done
by the CheriBSD project as they need larger pointers that
do not fit in the existing superblock.
This cleanup of the superblock eases the task of the commit
that immediately follows this one.
Suggested by: brooks
Reviewed by: kib
PR: 246983
Sponsored by: Netflix
- Update synopsis to present all available arguments.
- Consistently call the argument specifying an arbitrary directory a
"directory".
- Do not put macros into -width argument to Bl. They do not expand there.
- Stylize command modifiers like "daily" with Cm instead of Pa. While
technically periodic(8) operates on directories with such names, it is
confusing from the perspective of the manual page reader as Pa and Ar are
stylized the same way. Also, I cannot recall a single manual page where
Pa would be used to describe the syntax of command-line arguments.
MFC after: 2 weeks
Previously, it used atoi(3) to parse the unit parameter, which would silently
yield a unit of 0 in the presence of an invalid unit number. As most users of
mpsutil(8) are likely to have at least a unit 0, this is could have confusing
results.
This behaviour was particularly unintuitive if one incorrectly passed an
adapter device name, or a device path, instead of a unit number. In addition
to using strtoumax(3) instead of atoi(3) to parse unit numbers, support
stripping a device name (e.g. mps1) or path (e.g. /dev/mps2) to just its unit
number.
Reviewed by: scottl (earlier version)
Currently newsyslog supports <include> directive that is used
in our default /etc/newsyslog.conf in the following form:
<include> /usr/local/etc/newsyslog.conf.d/*
While this is suitable for ports installing their own rules
for logs rotation, this also makes newsyslog break entire
processing of all files if it encounters single line it cannot parse.
This includes lines referring to nonexistent username/group for log
ownership, so newsyslog stops calling errx() function in the parser.
With this fix, newsyslog uses warnx() instead of errx() in such cases
to print a warning, recover gracefully and continue with execution.
Among other cases, this unbreaks initial creation of log files
having flag "C" at boot time (newsyslog -CN). This is most important
for systems having RAM-based /var file system like nanobsd(8)-based
that rely on newsyslog to bring system log files into existence.
MFC after: 1 month
r362214 exposed UID_NOBODY and GID_NOGROUP to userspace, so use them
instead of the numbers.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25281
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
r362158 modified struct export_args for make the ex_flags field 64bits
and also changed the anonymous credentials to allow more than 16 groups.
This patch fixes mountd.c to use the new structure.
It does allocate larger exportlist and grouplist structures now.
That will be fixed in a future commit.
The only visible change will be that the credentials provided for the
-maproot and -mapall exports options can now have more than 16 groups.
Reviewed by: kib, freqlabs
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25088
r361780 fixed the code so that it would only remove the duplicate when
it actually existed. However, that might have resulted in XU_NGROUPS + 1
groups being copied, running off the end of the array. This patch fixes
the problem.
Spotted during code inspection for other mountd changes.
MFC after: 2 weeks
As of r359457 we removed the GDB_LIBEXEC option, always installing in-tree
gdb into /usr/libexec/. Thus, there is now no need for crashinfo to include
/usr/bin/gdb in the list of pathnames to check when looking for gdb.
Without this patch, if a SIGHUP is handled while the process is executing
get_exportlist(), that SIGHUP is essentially ignored because the got_sighup
variable is reset to 0 after get_exportlist().
This results in the exports file(s) not being reloaded until another SIGHUP
signal is sent to mountd.
This patch fixes this by resetting got_sighup to zero before the
get_exportlist() call while SIGHUP is blocked.
It also defines a delay time of 250msec before doing another exports reload
if there are RPC request(s) to process. This prevents repeated exports reloads
from delaying handling of RPC requests significantly.
PR: 246597
Reported by: patrykkotlowski@gmail.com
Tested by: patrykkotlowski@gmail.com
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25127
Prior to r174547, getgrouplist(3) always returned a groups list with
element 0 and 1 set to the basegid argument, so long as ngroups was > 1.
Post-r174547 this is not the case. r328304 disabled the deduplication that
removed the duplicate, but the duplicate still does not occur unless the
group for a user in the password database is also entered in the group
database.
This patch fixes mountd so that it handles the case where a user specified
with the -maproot or -mapall exports option has a getgrouplist(3) groups
list where groups[0] != groups[1].
Found while testing another mountd patch.
MFC after: 2 weeks
When WITHOUT_SENDMAIL is set, we end up with two different mailer.conf that
conflict, and hilarity ensues. There's currently three different places that
we might install mailer.conf:
- ^/etc/Makefile (package=runtime, contingent on MK_MAIL != no)
- ^/libexec/dma/dmagent/Makefile (package=dma, contingent on MK_SENDMAIL !=
no)
- ^/usr.sbin/mailwrapper/Makefile (package=utilities, contingent on
not-installed)
The mailwrapper installation will effectively never happen because the ^/etc
one will first.
This patch simplifies the whole situation; remove the ^/etc/Makefile version
and install it primarily in mailwrapper if MK_MAILWRAPPER != "no". The
scenarios covered in mailwrapper are:
- sendmail(8) is installed, dma(8) may or may not be installed
- neither sendmail(8) nor dma(8) is installed
In the first scenario, sendmail(8) is dominant so we can go ahead and
install the version in ^/etc/mail. In the unlisted scenario, sendmail(8) is
not installed but dma(8) is, we'll let ^/libexec/dma/dmagent do the
installation. In the second listed scenario, we still want to install an
example mailer.conf so just install the base sendmail(8) version.
Reviewed by: bapt
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24924
r316063 installed pf's embedded libevent as a private lib, with headers
in /usr/include/private/event. Unfortunately we also have a copy of
libevent v2 included in ntp, which needed to be updated for compatibility
with OpenSSL 1.1.
As unadorned 'libevent' generally refers to libevent v2, be explicit that
this one is libevent v1.
Reviewed by: vangyzen (earlier)
Differential Revision: https://reviews.freebsd.org/D17275
contained example here in the fdformat man page will allow us to
modernize and streamline the FreeBSD Handbook by cutting out some of
this legacy material.
While here, address some other minor grammatical nits in this man page.
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24971
- Return 2 x 16-bit registers in the correct byte order
for a 4-byte read that spans the CMD/STATUS register.
This reversal was hiding the capabilities-list, which prevented
the MSI capability from being found for XHCI passthru.
- Reorganize MSI/MSI-x config writes so that a 4-byte write at the
capability offset would have the read-only portion skipped.
This prevented MSI interrupts from being enabled.
Reported and extensively tested by Anatoli (me at anatoli dot ws)
PR: 245392
Reported by: Anatoli (me at anatoli dot ws)
Reviewed by: jhb (bhyve)
Approved by: jhb, bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24951
flags. For ease of integration, use the same flags as install:
-U unprivileged mode
-D <destdir> Specify DESTDIR (overrides the environment)
-M <metalog> Full path to METALOG file
Reviewed by: kevans
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24932
Comparing fsid_t objects requires internal knowledge of the fsid structure
and yet this is duplicated across a number of places in the code.
Simplify by creating a fsidcmp function (macro).
Reviewed by: mjg, rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24749
If certctl is installed on the system we're configuring, do a certctl
rehash.
Note that certctl may not be present if the world we've installed was built
either WITHOUT_OPENSSL or WITHOUT_CAROOT. In this scenario, we don't
currently see if the host has a certctl as this may be an indication that
the system *shouldn't* have certs installed into /etc/ssl.
Reviewed by: allanjude, dteske
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24640
These are allowed to be zero when the hardware reduced APCI flag is set
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23207
Up until now, all of our DESTDIR use has been with absolute paths. It turned
out that the cd in/out dance we do here breaks us down later on, as the
relative path no longer resolves.
Convert EXTENSIONS to an ERE that we'll use to grep ls -1 of the dir we're
inspecting, rather than cd'ing into it and globbing it up.
MFC after: 3 days
Expose the special kernel LAPIC, IOAPIC, and HPET devices to userspace
for use in, e.g., fallback instruction emulation (when userspace has a
newer instruction decode/emulation layer than the kernel vmm(4)).
Plumb the ioctl through libvmmapi and register the memory ranges in
bhyve(8).
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24525
After r360820, additional parameters are passed through the argument 'opts', and the name of the backend through the argument 'devname'. So, there is no need to skip the backend name from the 'opts' argument.
This change introduces new jail command hooks that run before and after any
other actions.
The exec.prepare hook can be used for example to invoke a script that checks
if the jail's root exists, creating it if it does not. Since arbitrary
variables in jail.conf can be passed to the command, it can be pretty useful
for templating jails.
An example use case for exec.release would be to remove the filesystem of an
ephemeral jail.
The names "prepare" and "release" are borrowed from the names of similar hooks
in libvirt.
Reviewed by: jamie, manpages, mmacy
Approved by: mmacy (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24829
Submitted by: debdrup (with some minor changes by kevans)
Reviewed by: bcr (manpages)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24818
Otherwise, removals from the blacklist may not get processed as they should.
While we're here, restructure these to not bother with mkdir(1) if we've
already tested them to exist.
MFC after: 3 days
It's been reported/noted that a well-timed `certctl rehash` will completely
obliterate $CERTDESTDIR, which may get used by ports or system
administrators. While we can't guarantee the certctl semantics when other
non-certctl-controlled bits live here, we should make some amount of effort
to play nice.
Pruning all existing links, which we'll subsequently rebuild as needed, is
sufficient for our needs. This can still be destructive, but it's perhaps
less likely to cause issues.
I also note that we should probably be pruning /etc/ssl/blacklisted upon
rehash as well.
Reported by: cem's dovecot server
MFC after: 3 days
