is incorrectly set to 0, for the purpose of "ignoring" the signal.
This does not ignore the signal, but rather, executes the function
at location 0 in kernel mode, which shortly thereafter causes a panic.
The sv_sensig entry for ibcs2 emulation should be set to the system's
normal sendsig routine.
- legitimate null frames from idle() (traceback was aborted after a null
pointer trap)
- second instruction of normal function prologue, and last instruction of
a function (caller wasn't reported).
Reviewed by: davidg
(This code is as yet untested; to come after man page is written.)
This also adds inlines to cpufunc.h for the RDTSC, RDMSR, WRMSR, and RDPMC
instructions. The user-mode interface is via a subdevice of mem.c;
there is also a kernel-size interface which might be used to aid
profiling.
determine if the interface had been assigned an IP address.
This code prevented the interface from receiving ethernet
broadcasts if it had no IP address assigned, and appeared
to be an optimization that is not completely needed.
Add support for LKM operation.
Change M_NOWAIT on buffer memory allocation to M_WAIT in hopes we'll be
able to get ourselves a nice fat buffer from the kernel if we suspend.
Note: The LKM support looks kinda screwy in two areas, where I found
problems with the kernel proper. First, calling dev_attach()
at module load time will cause a panic. I haven't investigated.
Secondly, I had to manually call qcam_drvinit() to register the
device softc structure by hand at module load time. This seems
bogus, it should be called as a core part of the module load
process for character/block device drivers.
vm_offset_t is currently unsigned long but should probably be plain
unsigned for i386's to match the choice of minimal types to represent
for fixed-width types in Lite2. Anyway, it shouldn't be assumed
to be unsigned long.
I only fixed the type mismatches that were detected when I changed
vm_offset_t to unsigned. Only pointer type mismatches were detected.
isn't supplying all the proper header info here! Last commit of fe0
entry should have had the following Submitted by line also).
Submitted-by: Masahiro SEKIGUCHI <seki@sysrap.cs.fujitsu.co.jp>
1. Create 2 x 8k transmit buffer blocks in place of the 16k block previously.
With this change the speed as tested with ttcp on a 2Mbit link went up
from 206kbyte/s to 236kbyte/s.
2. Change the rest of the functions to also have the definition of the
return value on a sepperate line.
3. Remove some unused variables.
4. Add code to recover from DMA underruns.
5. Reorder ar_get_packets() to handle errors better.
6. Only allocate a mbuf cluster if the data is more than the mbuf.
(and in a second diff in addition to the above)
7. Stops the occasional DMA underruns that occurred when 2 channels
are running at 2Mbit/s.
Submitted by: John Hay <jhay@mikom.csir.co.za>
loader is also present in the coff loader. It was possible to get one
more page allocated than needed, which would cause brk()/malloc()/etc
to fail with ENOMEM when it tried to re-allocate the space.
Also, change a bcopy() from kernel to user space to a copyout().
just in case a connection already existed.
Also, a minor optimization in the code which determins if a APM BIOS exists.
Reviewed by: phk
This is based on the APM-0.5 patch for Linux, but written entirely by me.
To complete this, some extra state has to be kept somewhere so that the
B38400 flag in Linux can be correctly translated to/from either 38400,
57600 or 115200.
Submitted by: Robert Sanders <rsanders@mindspring.com>
this code was not quite right (linux has a readdir and getdents syscall,
with the same args. readdir only returns one entry and uses a mutant
dirent structure. This code was also returning the mutant form for
getdents as well. My fault for missing this before.)
Compile and link a new kernel, that will give native ELF support, and
provide the hooks for other ELF interpreters as well.
To make native ELF binaries use John Polstras elf-kit-1.0.1..
For the time being also use his ld-elf.so.1 and put it in
/usr/libexec.
The Linux emulator has been enhanced to also run ELF binaries, it
is however in its very first incarnation.
Just get some Linux ELF libs (Slackware-3.0) and put them in the
prober place (/compat/linux/...).
I've ben able to run all the Slackware-3.0 binaries I've tried
so far.
(No it won't run quake yet :)
Cleanse the SCSI subsystem of its internally defined types
u_int32, u_int16, u_int8, int32, int16, int8.
Use the system defined *_t types instead.
aic7xxx.c:
Fix the reset code.
Instead of queing up all of the SCBs that timeout during timeout
processing, we take the first and have it champion the effort.
Any other scbs that timeout during timeout handling are given
another lifetime to complete in the hopes that once timeout
handing is finished, they will complete normally. If one of
these SCBs times out a second time, we panic and Justin tries
again.
The other major change is to queue flag aborted SCBs during timeout
handling, and "ahc_done" them all at once as soon as we have the
controller back into a sane state. Calling ahc_done any earlier
will cause the SCSI subsystem to toss the command right back at
us and the attempt to queue the command will conflict with what
the timeout routine is trying to accomplish.
The aic7xxx driver will now respond to bus resets initiated by
other devices.
Cleanse the SCSI subsystem of its internally defined types
u_int32, u_int16, u_int8, int32, int16, int8.
Use the system defined *_t types instead.
eisaconf.c:
Cosmetic formatting chagnes.
iterations of 30uS so that really fast systems stop getting
timeout messages from the Riscom driver.
Reviewed by: ache, peter@nmti.com (Peter da Silva)
handled correctly. Fix some incorrect code that was included
to improve performance. Significantly simplify the pmap_use_pt and
pmap_unuse_pt subroutines. Add some more diagnostic code.
is defined and FORCE_COMCONSOLE isn't defined.
Don't compile any keyboard probing code if PROBE_KEYBOARD isn't defined.
Makefile:
Removed -I paths. They weren't used, and the one to /sys hasn't worked
since the source directory was moved down one level.
counter instead of the BIOS time call to save space.
Reworked the anti-noise timeout to avoid duplicating code. The timeout
in the outer loop is now restarted after every noise timeout, so it is
now possible for the total timeout to be infinite; previously, the maximum
total timeout was 150000 seconds.
must have limit 0xffff and attribute G = 0 (byte granularity) as well
as other properties that they already had (see e.g., the Intel i486
manual section 22.5). Not restoring them broke Ctrl-Alt-Del in the
bootstrap for my ASUS P55TP4XE system, probably because the Award BIOS
does anti-tracing stuff involving inaccessible %esp's.
asm.S:
Don't use lret in prot_to_real(). This reduces the risk of using an
incompletely intialized stack segment and saves space.
Submitted by: "K.Higashino" <a00303@cc.hc.keio.ac.jp> (on 13 Jan 1995!)
reworked by me
Also, LINUX_POSIX_VDISABLE is \0, FreeBSD's is 0xff. Convert between them.
This enables some more programs to run, including the Livingston Portmaster
utilities (PMtools).
Submitted by: Robert Sanders <rsanders@mindspring.com>
since that's the only other USER_LDT using code that I know of.
Submitted by: Gary Jennejohn <Gary.Jennejohn@munich.netsurf.de>
Obtained from: {Origin of diffs may be someone else - I only rec'd them from
Gary}
netscape-2.0 for Linux running all the Java stuff. The scrollbars are now
working, at least on my machine. (whew! :-)
I'm uncomfortable with the size of this commit, but it's too
inter-dependant to easily seperate out.
The main changes:
COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386
machine dependent section into the linux emulator itself. The int 0x80
syscall code was almost identical to the lcall 7,0 code and a minor tweak
allows them to both be used with the same C code. All kernels can now
just modload the lkm and it'll DTRT without having to rebuild the kernel
first. Like IBCS2, you can statically compile it in with "options LINUX".
A pile of new syscalls implemented, including getdents(), llseek(),
readv(), writev(), msync(), personality(). The Linux-ELF libraries want
to use some of these.
linux_select() now obeys Linux semantics, ie: returns the time remaining
of the timeout value rather than leaving it the original value.
Quite a few bugs removed, including incorrect arguments being used in
syscalls.. eg: mixups between passing the sigset as an int, vs passing
it as a pointer and doing a copyin(), missing return values, unhandled
cases, SIOC* ioctls, etc.
The build for the code has changed. i386/conf/files now knows how
to build linux_genassym and generate linux_assym.h on the fly.
Supporting changes elsewhere in the kernel:
The user-mode signal trampoline has moved from the U area to immediately
below the top of the stack (below PS_STRINGS). This allows the different
binary emulations to have their own signal trampoline code (which gets rid
of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so
that the emulator can provide the exact "struct sigcontext *" argument to
the program's signal handlers.
The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which
have the same values as the re-used SA_DISABLE and SA_ONSTACK which are
intended for sigaction only. This enables the support of a SA_RESETHAND
flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal
semantics where the signal handler is reset when it's triggered.
makesyscalls.sh no longer appends the struct sysentvec on the end of the
generated init_sysent.c code. It's a lot saner to have it in a seperate
file rather than trying to update the structure inside the awk script. :-)
At exec time, the dozen bytes or so of signal trampoline code are copied
to the top of the user's stack, rather than obtaining the trampoline code
the old way by getting a clone of the parent's user area. This allows
Linux and native binaries to freely exec each other without getting
trampolines mixed up.
the S-Video input. It also has code in the driver for the meteor RGB support
and some other bug fixes. I don't have a meteor RGB but I have been told
that it works.
Submitted by: Jim Lowe <james@miller.cs.uwm.edu>
- split driver into FreeBSD specific and camera specific portions
(qcamio.c can run in user mode, with a Linux "driver top" etc,
and qcam.c should be trivial to port to NetBSD and BSDI.)
- support for 4bppand bidirectional transfers working better
- start of interleaved data-transfers byte-stream decodes (some of this
stuff has been pulled out for the moment to make it easier to debug)
At this point, anyone who wants to port it to other platforms should feel
free to do so. Please feed changes directly back to me so that I can produce
a unified distribution.
doesn't break support for the older models (tested with my 3C589B).
Reviewed by: Joshua Gahm <jgahm@BBN.COM>
Submitted by: hosokawa@mt.cs.keio.ac.jp (HOSOKAWA Tatsumi)
prevent it from conflicting with other drivers (like the aic7xxx driver).
Most of the work was in spliting out common portions of the driver and
making them generic enough to be called from the eisaconf probe.
The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa
configuration mode.
aha1742.c aic7770.c bt74x.c:
Only call eisa_registerdev after the probe is successfully.
eisaconf.c:
Increase kdc->kdc_datalen during the eisa_reg* functions instead of
in the eisa_add* functions since eisa_registerdev has already been
called and we have a kdc to manipulate.
