virtual COM port. This makes the use of the Dell OpenManage tools on FreeBSD
considerably easier, and is based on Chuck Cranor's original patch for 4.6.
Reviewed by: imp
Tested by: dpk at dpk dot net
MFC after: 1 week
o rework pll setup code to follow h/w specification
o add hint.hifn.X.pllconfig to specify reference clock setup
requirements; default is pci66 which means the clock is
derived from the PCI bus clock and the card resides in a
66MHz slot
Tested on 7955 and 7956 cards; support for 7954 cards not enabled
since we have no cards to test against.
In collaboration with Poul-Henning Kamp.
Reviewed by: phk
MFC after: 1 week
Rather than have a twisty maze of special case allocations, move
instead to a data driven allocation. This should be the most robust
way to cope with the resource problems that the multiplicity of ways
of encoding 5 registers that have the misfortune of not being a power
of 2 nor contiguous.
Also, make it less impossible that pccard will work. I've not been able
to get my libretto floppy working, but it now fails later than before.
phk and I had similar ideas on this during the 5.3 release cycle, but
it wasn't until recently that I could test more than one allocation
scenario.
MFC After: 1 month (5.4 if possible, 5.5 if not)
producers rather than consumers as new-bus resources only handle consumed
resources. We already do this for the other ACPI resource types that
support the producer/consumer attribute.
object (/) rather than the pci bus object when walking the _PRT to force
attach devices. We already look up relative to the root object when doing
interrupt routing.
Suggested by: njl
For such devices, we require _PRS to exist and we warn if any of the
resources in _PRS are not IRQ resources (since we'll have no way of knowing
which of those resources to use without a working _CRS). When it does
come time to set resources, we build up a resource buffer from scratch
as we do for devices with _CRS that only have IRQ resources.
- Fix a bug with setting extended IRQ resources where we set the IRQ value
in the wrong resource structure meaning that whichever IRQ was listed in
_PRS was used instead. This might fix some weird issues on certain boxes
where IRQs > 16 don't seem to work when using ACPI.
- Fix a bug with how we walked the resource buffer after _SRS to call
config_intr() in that the 'end' variable was not properly updated, so we
could either terminate the loop early or loop after the end of the
buffer.
Tested by: pjd
o increase the max per-frame tx descriptor count and the number of tx
buffers for forthcoming fast frame support
o correct the max scatter/gather count; it cannot be larger than the
max(tx,rx,beacon) descriptor counts
(fix imported from madwifi by Takanori Watanabe)
o eliminate save/restore of pci registers handled by the system
o eliminate duplicate zero of the softc (noted by njl)
o consolidate common code
MFC after: 1 week
for the vast majority of our cards. However, they are critically
needed to distinguish different fe based PC Cards (the FMV-182 from
the 182A) which need to be treated differently (the ethernet address
is loaded not from the standard CIS-based ethernet tuples, but from
differing locations in attribute space based on the version string in
CIS3. This should have no impact for other users of this function.
- Introduce the amr_io_lock to control access to command queues, bio queues,
and the hardware.
- Eliminate the taskqueue and do all completion processing in the ithread.
- Assign a static slot number to each command instead of doing a linear
search for free slots each time a command is needed.
- Modify the interrupt handler to more closely match what Linux does, for
safety.
read the ethernet address from the attribute space hasn't been
implemented. Also add flags for the MBH10302. The flags and maddr
fields will be used when reading from the attribute space...
allows my 3com cards to work again. It appears that this code was
once there, but I removed it when I added the alignment issues.
MFC After: 5 days
PR: 70639 (and likely others)
o Implement a shiny new algorithm to keep track of finger movement at
slow speeds. This dramatically reduces the level of questionable
language from users trying to resize windows.
o Properly catch the many extra buttons and dials which manufacturers
are known to screw onto Synaptics touchpad controllers. Currently,
up to seven buttons are known to work, more should work too.
o Add a number of sysctls allowing one to tune the driver to taste in
a simple way:
# Should the extra buttons act as axes or as middle button
hw.psm.synaptics.directional_scrolls
# These control the 'stickiness' at low speeds
hw.psm.synaptics.low_speed_threshold
hw.psm.synaptics.min_movement
hw.psm.synaptics.squelch_level
PR: kern/75725
Submitted by: Jason Kuri <jay@oneway.com>
MFC after: 1 month
