Christian Brueffer
75190ff847
Note read-only support for NVIDIA MediaShield.
2005-06-06 19:08:12 +00:00
Andrew Thompson
7afc53b8df
Connect if_bridge to the build.
...
Approved by: mlaier (mentor)
2005-06-05 03:32:53 +00:00
Andrew Thompson
31997bf223
Add if_bridge, which provides more advanced Ethernet bridging and 802.1d
...
spanning tree support.
Based on Jason Wright's bridge driver from OpenBSD, and modified by Jason R.
Thorpe in NetBSD.
Reviewed by: mlaier, bms, green
Silence from: -net
Approved by: mlaier (mentor)
Obtained from: NetBSD
2005-06-05 02:59:26 +00:00
Tai-hwa Liang
7a3afb563c
Adding note about required firmware to save others time and frustration with
...
this device.
Obtained from: imp (if_iwi)
Encouraged by: damien
2005-06-01 07:13:21 +00:00
Christian Brueffer
3962985ba8
Add the Dell PERC 4/IM as supported.
...
Submitted by: Muthu_T@Dell.com
2005-05-30 12:26:12 +00:00
Simon L. B. Nielsen
9e56be4c64
Catch up with s/dev_t/struct cdev */.
2005-05-29 21:23:50 +00:00
Tai-hwa Liang
905ff382d1
Typo correction.
2005-05-29 14:56:51 +00:00
Christian Brueffer
cc636eb10e
Document support for the 82573 chip.
2005-05-27 04:52:21 +00:00
Christian Brueffer
d8a4b9c059
Document support for some Dell PERC adapters.
...
Submitted by: Muthu_T@Dell.com
MFC after: 3 days
2005-05-25 15:35:31 +00:00
Christian Brueffer
99c2f31565
3Com 3C2000-T reported as working.
...
Submitted by: anonymous
2005-05-24 15:42:42 +00:00
Christian Brueffer
1769bce343
soundcard -> sound card
...
MFC after: 3 days
2005-05-22 16:14:55 +00:00
Christian Brueffer
24cfe4f10e
- Add a HARDWARE section based on the previous 'Supported Cards'
...
subsection and the hardware notes.
- Xref all snd_* drivers
MFC after: 1 week
2005-05-22 15:25:14 +00:00
Christian Brueffer
b1a83d0adb
BCM5789 support.
...
MFC after: 3 days
2005-05-22 10:27:51 +00:00
Tom Rhodes
846e187c43
Fix sentence structure to follow a better logic (zero is disable and
...
one is enable).
2005-05-21 17:22:12 +00:00
Christian Brueffer
e9a32efc6e
Document support for the 5714.
...
MFC after: 3 days
2005-05-20 01:20:23 +00:00
Christian Brueffer
bf7f62ef58
Add nve(4).
2005-05-20 01:19:02 +00:00
Christian Brueffer
fed9784e38
- Connect nve(4)
...
- Correct sorting order
Suggested and reviewed by: ru
2005-05-19 14:54:48 +00:00
Christian Brueffer
0a02677cd7
Manpage for the nve NVIDIA nForce MCP Ethernet driver. The manpage is based
...
on the nvnet driver manpage by Quinton Dolan.
Especially the list of supported hardware needs some work.
2005-05-19 14:52:42 +00:00
Warner Losh
a398848137
Add note about required firmware to save others time and frustration with this device
2005-05-15 21:08:51 +00:00
Gleb Smirnoff
1771f872d5
- Document net.inet.carp.suppress_preempt MIB.
...
- Xref pfsync(4)
2005-05-15 01:58:32 +00:00
Christian Brueffer
355ff30c95
Wordsmithing.
...
PR: 80133
Submitted by: Zheyu Shen <free.bsd@gmx.net>
MFC after: 3 days
2005-05-12 16:18:58 +00:00
Gleb Smirnoff
8b39984252
Describe newly implemented bug.
2005-05-11 11:53:37 +00:00
Christian Brueffer
e2f59e932f
Manual page for the "mn" Siemens Easy321-R1 E1/T1 device driver.
...
This is based on the comments in if_mn.c.
MFC after: 3 days
2005-05-10 16:48:03 +00:00
Philip Paeps
18d92cd86c
Sync with Linux acpi4asus, adding support for loads of new models.
...
MFC after: 3 days
2005-05-09 12:51:48 +00:00
Philip Paeps
5894dd7d1a
Put the time traveling machine back where I found it before anyone sees. ;-)
...
Pointy hat to: philip
2005-05-09 09:01:13 +00:00
Philip Paeps
caac49960b
Add support for Asus V6V[1] and W1N notebooks.
...
Submitted by: Jean-Sébastien Pédron <jspedron@club-internet.fr> [1]
MFC after: 3 days
2005-05-09 08:43:49 +00:00
Warner Losh
15fd13dc7c
One more variant branding of 3C574 family: the plain old 3c574
2005-05-08 22:36:10 +00:00
Christian Brueffer
5cd00b7223
Manual page for the acpi_ibm(4) hotkey driver.
2005-05-07 13:42:15 +00:00
Gleb Smirnoff
17a35ce727
Manual page for ng_nat node.
2005-05-06 15:33:12 +00:00
Wilko Bulte
6fab7ca2d7
ICH5 is also supported by ichsmb
2005-05-05 12:03:36 +00:00
Joseph Koshy
c5153e190b
Add convenience APIs pmc_width() and pmc_capabilities() to -lpmc.
...
Have pmcstat(8) and pmccontrol(8) use these APIs.
Return PMC class-related constants (PMC widths and capabilities)
with the OP GETCPUINFO call leaving OP PMCINFO to return only the
dynamic information associated with a PMC (i.e., whether enabled,
owner pid, reload count etc.).
Allow pmc_read() (i.e., OPS PMCRW) on active self-attached PMCs to
get upto-date values from hardware since we can guarantee that the
hardware is running the correct PMC at the time of the call.
Bug fixes:
- (x86 class processors) Fix a bug that prevented an RDPMC
instruction from being recognized as permitted till after the
attached process had context switched out and back in again after
a pmc_start() call.
Tighten the rules for using RDPMC class instructions: a GETMSR
OP is now allowed only after an OP ATTACH has been done by the
PMC's owner to itself. OP GETMSR is not allowed for PMCs that
track descendants, for PMCs attached to processes other than
their owner processes.
- (P4/HTT processors only) Fix a bug that caused the MI and MD
layers to get out of sync. Add a new MD operation 'get_config()'
as part of this fix.
- Allow multiple system-mode PMCs at the same row-index but on
different CPUs to be allocated.
- Reject allocation of an administratively disabled PMC.
Misc. code cleanups and refactoring. Improve a few comments.
2005-05-01 14:11:49 +00:00
Brooks Davis
e32931227c
Remove the Netgear WG311 from the list. The v1 card is supported, but
...
the v2 card is a TI. Since we're not attempting to keep this list
complete, removing this is best.
Reported by: Brian Candler <B dot Candler at pobox dot com>
Evan Dower <evantd at hotmail dot com>
MFC After: 1 day
2005-04-29 15:07:44 +00:00
Bjoern A. Zeeb
0af07d538f
Document sysctl introduced with if_sk.c rev. 1.101.
...
Add D-Link DGE-530T to list of supported hardware.
Reviewed by: ru (initial version), simon (updated version)
Approved by: pjd (mentor)
2005-04-24 20:26:09 +00:00
Nate Lawson
26db811ebd
Document the debug.acpi.max_threads tunable.
2005-04-22 23:21:09 +00:00
Christian Brueffer
faa0a0aa88
Add the short but important word 'software' to the title.
2005-04-21 14:58:26 +00:00
SUZUKI Shinsuke
bc24eee3ce
FAITH's base spec has already been an RFC
...
Obtained from: KAME
MFC after: 1 day
2005-04-21 13:27:13 +00:00
Christian Brueffer
8b72a3f693
Fix typo.
...
PR: 80133
Submitted by: Zheyu Shen <free.bsd@gmx.net>
2005-04-20 10:41:09 +00:00
Simon L. B. Nielsen
ad787bb4d0
Cross reference ehci(4).
...
Suggested by: Flemming Jacobsen
MFC after: 3 days
2005-04-20 07:33:09 +00:00
Nate Lawson
f8420b5828
Add a driver for SMI-based SpeedStep. The hardware supports two frequency
...
settings and is an older version of the same design used for ICH SpeedStep.
It is only known to be available on PIIX4 chipsets.
Many thanks to Bruno Ducrot for writing the driver and Jon Noack for
testing.
Submitted by: Bruno Ducrot
2005-04-19 16:38:24 +00:00
Joseph Koshy
ebccf1e3a6
Bring a working snapshot of hwpmc(4), its associated libraries, userland utilities
...
and documentation into -CURRENT.
Bump FreeBSD_version.
Reviewed by: alc, jhb (kernel changes)
2005-04-19 04:01:25 +00:00
Damien Bergamini
ceaec73d40
Initial import of ipw, iwi, ral and ural drivers:
...
ipw - Intel PRO/Wireless 2100
iwi - Intel PRO/Wireless 2200BG/2225BG/2915ABG
ral - Ralink Technology RT2500
ural - Ralink Technology RT2500USB
Approved by: silby (mentor)
2005-04-18 18:47:38 +00:00
Simon L. B. Nielsen
c632f6dbda
Catch up with new naming scheme for USB serial devices: s/ucom/cuaU/.
...
PR: docs/80027
Submitted by: Rong-En Fan <rafan@infor.org>
2005-04-17 16:08:51 +00:00
Christian Brueffer
a431f9bb61
Xref ataraid(4).
2005-04-16 12:43:17 +00:00
Christian Brueffer
4b40473f20
Manual page for the ataraid(4) software RAID driver.
...
Reviewed by: sos
2005-04-16 12:40:38 +00:00
Ruslan Ermilov
df98ba00cd
Grr, fix another braino.
2005-04-16 05:34:48 +00:00
Ruslan Ermilov
644a4ae9d0
Fix braino in previous revision.
2005-04-16 05:33:42 +00:00
Simon L. B. Nielsen
514ff253c2
- Add Dell PERC 4ei to the list of supported devices. It's an
...
alias used by Dell sometimes for PERC 4e/Si. [1]
- Delete some trailing whitespace.
MFC after: 1 day
Rapported by: Jon Kuster <kwsn@earthlink.net> [1]
2005-04-15 21:18:31 +00:00
Matthew N. Dodd
b137ea624b
Provide a sysctl (net.link.tap.user_open) to allow unpriviliged
...
acces to tap(4) device nodes based on file system permission.
Duplicate the 'debug.if_tap_debug' sysctl under the
'net.link.tap' hierarchy.
2005-04-13 00:30:19 +00:00
Matthew N. Dodd
6a2989fd54
Implement unix(4) socket options LOCAL_CREDS and LOCAL_CONNWAIT.
...
- Add unp_addsockcred() (for LOCAL_CREDS).
- Add an argument to unp_connect2() to differentiate between
PRU_CONNECT and PRU_CONNECT2. (for LOCAL_CONNWAIT)
Obtained from: NetBSD (with some changes)
2005-04-13 00:01:46 +00:00
Matthew N. Dodd
5d69a26bc9
Indent structure members.
2005-04-12 23:49:57 +00:00