This sysctl allows a deeper dive into the sleep abyss comparing to
debug.acpi.suspend_bounce. When the new sysctl is set the system will
execute the suspend sequence up to the call to AcpiEnterSleepState().
That includes saving processor contexts and parking APs. Then, instead
of actually entering the sleep state, the BSP will call resumectx() to
emulate the wakeup. The APs should get restarted by the sequence of
Init and Startup IPIs that BSP sends to them.
MFC after: 8 days
The MIPS ptrace_single_step() unlocks the PROC_LOCK while reading and
writing instructions from userland. One failure case was not reacquiring
the lock before returning.
- Use TRAP_TRACE for traps after stepping via PT_STEP.
- Use TRAP_BRKPT for software breakpoint traps and watchpoint traps.
This was tested via the recently added siginfo ptrace() tests. PT_STEP on
MIPS has several bugs that prevent it from working yet, but this does fix
the ptrace__breakpoint_siginfo test on MIPS.
- ptrace__breakpoint_siginfo tests that a SIGTRAP for a software breakpoint
in userland triggers a SIGTRAP with a signal code of TRAP_BRKPT.
- ptrace__step_siginfo tests that a SIGTRAP reported for a step after
stepping via PT_STEP or PT_SETSTEP has a signal code of TRAP_TRACE.
- Use a single list of platforms to define HAVE_BREAKPOINT for platforms
that expose a functional breakpoint() inline to userland. Replace
existing lists of platform tests with HAVE_BREAKPOINT instead.
- Add support for advancing PC past a breakpoint inserted via breakpoint()
to support the existing ptrace__PT_CONTINUE_different_thread test on
non-x86 platforms (x86 advances the PC past the breakpoint instruction,
but other platforms do not). This is implemented by defining a new
SKIP_BREAK macro which accepts a pointer to a 'struct reg' as its sole
argument and modifies the contents to advance the PC. The intention is
to use it in between PT_GETREGS and PT_SETREGS.
Tested on: amd64, i386, mips (after adding a breakpoint() to mips)
MFC after: 1 month
For cross-architecture reproducibility. The db(3) functions work with
hashes of either endianness, and the current (v4) version password db
entries already store integers in network order. Do so with the hash as
well so that identical password databases can be created on big- and
little-endian hosts.
The -B and -L flags exist to set the endianness for legacy (v3) entries
when the -l flag is used, and they will still control hash endianness
(at least until the backwards compatibility infrastructure is removed).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Each malloc/free was testing dtrace_malloc_enabled and forcing
extra reads from the malloc type struct to see if perhaps a
dtmalloc probe was on.
Treat it like lockstat and sdt: have a global bolean.
[X86] In X86FlagsCopyLowering, when rewriting a memory setcc we need
to emit an explicit MOV8mr instruction.
Previously the code only knew how to handle setcc to a register.
This should fix a crash in the chromium build.
This fixes various assertion failures while building ports targeting
i386:
* www/firefox: isReg() && "This is not a register operand!"
* www/iridium, www/qt5-webengine: (I.atEnd() || std::next(I) ==
def_instr_end()) && "getVRegDef assumes a single definition or no
definition"
* devel/powerpc64-gcc: FromReg != ToReg && "Cannot replace a reg with
itself"
Reported by: jbeich
PR: 225330, 227686, 227698, 227699
MFC after: 1 week
X-MFC-With: r332833
malloc was showing at the top of profile during while running microbenchmarks.
#define DTMALLOC_PROBE_MAX 2
struct malloc_type_internal {
uint32_t mti_probes[DTMALLOC_PROBE_MAX];
u_char mti_zone;
struct malloc_type_stats mti_stats[MAXCPU];
};
Reading mti_zone it wastes a cacheline to hold mti_probes + mti_zone
(which we know is 0) + part of malloc stats of the first cpu which on top
induces false-sharing.
In particular will-it-scale lock1_processes -t 128 -s 10:
before: average:45879692
after: average:51655596
Note the counters can be padded but the right fix is to move them to
counter(9), leaving the struct read-only after creation (modulo dtrace
probes).
This fixes media display for 802.11 wireless devices.
Software outside the base system that uses these media types and
defines should use #ifdef IFM_FDDI or IFM_TOKEN to include or remove
support.
Reported by: zeising
Reviewed by: emaste, kib, zeising
Tested by: zeising
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15170
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
- Add an implementation of atomic_fcmpset_32() using RAS for armv4/v5.
This fixes recent world breakage due to use of atomic_fcmpset() in
userland.
- While here, be more careful to not expose wrapper macros for 64-bit
atomic_*cmpset to userland for armv4/v5 as only 32-bit cmpset is
implemented.
This has been reviewed, but not runtime-tested, but should fix the arm.arm
and arm.armeb worlds that have been broken for a while.
Reviewed by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15147
The return value of atomic_cmpset() and atomic_fcmpset() is an int (which
is really a bool) that has the values 0 or 1. Some of the inlines were
using the type being operated on (e.g. uint32_t) as either the return type
of the function, or the type of a local 'ret' variable used to hold the
return value. Fix all of these to just use plain 'int'. Due to C promotion
rules and the fact that the value can only be 0 or 1, these should all be
harmless.
Reviewed by: imp (only the v4 ones)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15147
considered as originated by our host packet. And thus rcvif should be
NULL, since it is used by ipfw(4) to determine that packet was originated
from this host. Some of icmp6_reflect() consumers reuse mbuf and m_pkthdr
without resetting rcvif pointer. To avoid this always reset m_pkthdr.rcvif
pointer to NULL in icmp6_reflect(). Also remove such line and comment
describing this from icmp6_error(), since it does not longer matters.
PR: 227674
Reported by: eugen
MFC after: 1 week
Intel® Arria® 10 SoC.
Cadence Quad SPI Flash is not generic SPI controller, but SPI flash
controller, so don't use spibus here, instead provide quad spi flash
interface.
Since it is not on spibus, then mx25l flash device driver is not usable
here, so provide new n25q flash device driver with quad spi flash
interface.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10245
This combined with previous changes significantly depessimizes the behaviour
under contentnion.
In particular the lock1_processes test (locking/unlocking separate files)
from the will-it-scale suite was executed with 128 concurrency on a
4-socket Broadwell with 128 hardware threads.
Operations/second (lock+unlock) go from ~750000 to ~45000000 (6000%)
For reference single-process is ~1680000 (i.e. on stock kernel the resulting
perf is less than *half* of the single-threaded run),
Note this still does not really scale all that well as the locks were just
bolted on top of the current implementation. Significant room for improvement
is still here. In particular the top performance fluctuates depending on the
extent of false sharing in given run (which extends beyond the file).
Added chain+lock pairs were not padded w.r.t. cacheline size.
One big ticket item is the hash used for spreading threads: it used to be the
process pid (which basically serialized all threaded ops). Temporarily the
vnode addr was slapped in instead.
Tested by: pho
I have changed my given name from Bruce to Rebecca, and my FreeBSD account
from brucec to bcran.
Update committers-src.dot and calendar.freebsd to show these changes.
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D15125
kproc_suspend_check. In r329612 bufspacedaemon was turned into a thread
of the bufdaemon process causing both to call kproc_suspend_check with the
same proc argument and that function contains the following while loop:
while (SIGISMEMBER(p->p_siglist, SIGSTOP)) {
wakeup(&p->p_siglist);
msleep(&p->p_siglist, &p->p_mtx, PPAUSE, "kpsusp", 0);
}
So one thread wakes up the other and the other wakes up the first again,
locking up UP machines on shutdown.
Also register the shutdown handlers with SHUTDOWN_PRI_LAST + 100 so they
run after the syncer has shutdown, because the syncer can cause a
situation where bufdaemon help is needed to proceed.
PR: 227404
Reviewed by: kib
Tested by: cy, rmacklem
1. check if P_ADVLOCK is already set and if so, don't lock to set it
(stolen from DragonFly)
2. when trying for fast path unlock, check that we are doing unlock
first instead of taking the interlock for no reason (e.g. if we want
to *lock*). whilere make it more likely that falling fast path will
not take the interlock either by checking for state
Note the code is severely pessimized both single- and multithreaded.
sysentvec::sv_hwcap/sv_hwcap2 are pointers to u_long, so cpu_features* need
to be u_long to use the pointers. This also requires a temporary cast in
printing the bitfields, which is fine because the feature flag fields are
only 32 bits anyway.
In recently added sendrecv profile, there was a line purposefully
added to introduce a compilation error in which `-dev' is used to
debug the entry. Removing the entry.
Sponsored by: Smule, Inc.
The options `-d' (debug), `-e' (exit after compile), and `-v' (verbose)
when combined in any order (though best remembered as `-dev') will run
the conflated script through dtrace(1), test for error conditions, and
show the line that dtrace(1) failed at (with context).
If no errors are found, the output is the same as `-e[v]'.
When writing a new profile for dwatch(1), you can quickly test to
make sure it compiles by running `dwatch -devX profile_name' where
profiles live in /usr/libexec/dwatch or /usr/local/libexec/dwatch
(the latter being where profiles installed via ports should go).
Sponsored by: Smule, Inc.
these assumptions may not hold true once we've panic'd. Therefore, the
checks hold less value after a panic. Additionally, if one of the checks
fails while we are already panic'd, this creates a double-panic which can
interfere with debugging the original panic.
Therefore, this commit allows an administrator to suppress a response to
KASSERT checks after a panic by setting a tunable/sysctl. The
tunable/sysctl (debug.kassert.suppress_in_panic) defaults to being
enabled.
Reviewed by: kib
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D12920
FreeBSD exports the AT_HWCAP* auxvec items if provided by the ELF sysentvec
structure. Add the CPU features to be exported, so user space can more
easily check for them without using the hw.cpu_features and hw.cpu_features2
sysctls.
Prior to r332851:
* --exclude always win out over --include
* --exclude-dir always wins out over --include-dir
r332851 broke that behavior, resulting in:
* First of --exclude, --include wins
* First of --exclude-dir, --include-dir wins
As it turns out, both behaviors are wrong by modern grep standards- the
latest rule wins. e.g.:
`grep --exclude foo --include foo 'thing' foo`
foo is included
`grep --include foo --exclude foo 'thing' foo`
foo is excluded
As tested with GNU grep 3.1.
This commit makes bsdgrep follow this behavior.
Reported by: se
Not all feature flags are synced. Those for processors we don't currently
support are ignored currently. Those that are supported are synced best I
can tell. One flag was renamed to match the Linux flag name
(PPC_FEATURE2_VCRYPTO -> PPC_FEATURE2_VEC_CRYPTO).
