the gnu libobjc rather than the NeXT one. I do not understand objc
so I don't know the implications of this, but the gcc-2.7.2 libobjc is
built with this.
in the tree that use things like bsd.prog.mk just to get the default
targets like install, tags, obj, clean, cleandir, cleandepend, but do not
actually build anything there.
bsd.obj.mk. Also, a make target called objwarn checks to see
if ${.OBJDIR} != ${.CURDIR} and ${.OBJDIR} != ${CANONICALOBJDIR}
and outputs a warning. (No warning for the latter if MAKEOBJDIR or MAKEOBJDIRP
REFIX is set). objwarn is called from all targets in bsd.prog.mk, bsd.kmod.mk,
and bsd.lib.mk.
Reviewed by: bde
man pages (eg: named/bind/etc). In order to get (say) dig.1 to pass
through the filter and produce a new dig.1 for installing, I used an
intermediate file at build time, similar to the way the .gz man pages are
built.
I've not extensively tested this, but it seems to work for the known
cases where it was failing, and it only affects the NOMANCOMPRESS case
which was already broken.
Pointed out by: "Ph. Charnier" <charnier@xp11.frmug.org>, PR#1612
Add a section on what to do in order to recompile the latest BIND from ISC.
Change a & into a more proper & as LaTeX shoked on it.
Obtained from: Usenet
Submitted-By: "David E. O'Brien" <obrien@Nuxi.cs.ucdavis.edu>
Incorporate new development section, since Satoshi seems to have wandered
off for a bit and I have too much stuff stacking up in my handbook directory.
Submitted-By: asami
negated the descriptive sense of "frag" and "-N", which were clearly wrong.
changed instructions (which were bogus in the extreme) for allowing/preventing
outgoing rsh/rlogin, rewording the paragraph so it applies to incoming
connections so it actually both makes sense and tells the truth. It can
be deleted instead if not relevant.
did not change the paragraph about loading multiple rules in one command,
although this operation is now partially supported by loading from a
command file.
I hope I'm not treading on anyone's toes here.
Running them twice usually destroyed the target binary. E.g., the
second `make objlink' in `make objlink; make; make objlink' replaced
the `cat' binary by a symlink cat@ -> /usr/obj/usr/src/bin/cat.
`ln -fs' is unusable when the target might be a symlink that resolves
to a directory. Then -f applies to a file in the directory and not
to the symlink. This seems to be the standard (and sometimes useful)
behaviour.
Added forgotten share/doc/psd/05.sysman and share/zoneinfo/America/Indiana.
bsd.doc.mk:
Nuked mkdir -p and wrong fixups of the leaf directory's ownerships and
permissions. The doc tree should be well enough established for this
to be safe. Installs to directories should use a trailing slash on
the directory name so installs to non-drectories are fatal, but I
didn't start changing them.
bsd.man.mk:
Nuked mkdir -p and wrong fixups of the leaf directory's ownerships and
permissions. They were overkill to create just /usr/share/info.
zoneinfo/Makefile:
No changes yet. zic creates directories with ordinary 755 permissions.
Why do we use 555 permissions for directories in /usr/share/zoninfo.
Why not for zoneinfo itself? /proc and /dev/fd are the only other
directories in the system with 555 permissions.
note that at_shutdown has a new parameter to indicate When
during a shutdown the callout should be made. also
add a RB_POWEROFF flag to reboot "howto" parameter..
tells the reboot code in our at_shutdown module to turn off the UPS
and kill the power. bound to be useful eventually on laptops
pages.
For those of you that don't know, here is an example of how the .Fx
macro is used:
The xyzzy command first appeared in
.Fx 2.2 .
Will expand to:
The xyzzy command first appeared in FreeBSD 2.2.
"4.4BSD-Lite" (not "4.4 BSD Lite", "BSD 4.4-lite" or some such), this
is what the CSRG people call their release in the red daemon book (and
most of the handbook had it that way).
substitute.
(2) Bring the *_DEPENDS section up to the current state. Explain that
the pathname in the "path:dir" pair can be a full pathname if you
want a port to depend on something that isn't executable or an
executable that's not expected to be in the user's search path
(like /usr/local/libexec). Also, change the LIB_DEPENDS example
to use jpeg, tcl-7.3's appropriateness as an example is quite
outdated at this point. ;)
Here are the diffs for libc_r to get it one step closer to P1003.1c
These make most of the thread/mutex/condvar structures opaque to the
user. There are three functions which have been renamed with _np
suffixes because they are extensions to P1003.1c (I did them for JAVA,
which needs to suspend/resume threads and also start threads suspended).
I've created a new header (pthread_np.h) for the non-POSIX stuff.
The egrep tags stuff in /usr/src/lib/libc_r/Makefile that I uncommented
doesn't work. I think its best to delete it. I don't think libc_r needs
tags anyway, 'cause most of the source is in libc which does have tags.
also:
Here's the first batch of man pages for the thread functions.
The diff to /usr/src/lib/libc_r/Makefile removes some stuff that was
inherited from /usr/src/lib/libc/Makefile that should only be done with
libc.
also:
I should have sent this diff with the pthread(3) man page.
It allows people to type
make -DWANT_LIBC_R world
to get libc_r built with the rest of the world. I put this in the
pthread(3) man page. The default is still not to build libc_r.
also:
The diff attached adds a pthread(3) man page to /usr/src/share/man/man3.
The idea is that without libc_r installed, this man page will give people
enough info to know that they have to build libc_r.
so that people can look and comment.
I'll add the at_fork and at_exit immediatly, but I'll
add teh at_shutdown later as it's more extensive
and I desire people's comments..
julian
bombing mercilessly.
(2) If that directory has a directory called CVS, remind the user of
the existence of the "-P" option to cvs co and update.
(3) While I'm here, clean up the PATCH_DEBUG code a bit. In
particular, don't duplicate a whole bunch of code just for adding
a single "echo" statement. ;)
Reviewed by: the ports list
the devices I once owned or contemplated purchasing .. )
(1) The ncr controller supports 53C810/815/825/860/875.
(2) Descrpitions of fxp0 and vx0 were missing.
(3) The ed driver supports SMC 8216 (`Elite Ultra') too.
(4) Add pseudo-device ccd.
won't be pulled into individual ports that include this file. ;)
(2) Document MOTIFLIB, it's not set in the ports Makefiles but is
important for Motif ports (already documented in the handbook).
(3) Add INSTALL_PROGRAM, INSTALL_SCRIPT, INSTALL_DATA, INSTALL_MAN as
"aliases" of the appropriate install command line, for use in *-install
targets.
Reviewed by: the ports list (item 3 only)
eg: options "SCSI_DELAY=15" should be options SCSI_DELAY=15, as config
knows about the "=" and splits it correctly into key=value for the #defines.
The only options that need quotes are those that have numbers as part of
the actual name, eg: "TUNE_1542" and "COMPAT_IBCS2".
pipe the man page source through before compressing or installing.
This can be used to do do (eg) sed substitution on man pages from
3rd party packages (in particular, ncurses and bind-4.9.4)
This should not affect anything already in the source tree.
address - Melbourne is a city in the state of Victoria, not vice versa! :-)
Also add reference to Greg Lehey's books in the appropriate section,
replace some redundant questions by pointers to the Handbook, replace
"look at this bit of the Handbook" pointers by URLs, clean up
inconsistent use of "one" and "you" and fix a couple of typos
introduced by my previous changes...
* Removed material that was duplicated in the installation instructions.
* Updated the address for an Australian supplier of CDROMs (supplied by
David Henshaw via Martin Butkus).
* Give more info about how to get started with the installation.
* Update references to 2.1.0 as "the latest release".
* Added pointer to a Web page explaining how to have multiple operating
systems on the same machine.
* Moved question about running DOS binaries out of the installation section.
* Added question re boot floppy not loading properly.
* Added explanation of disk geometry, moved things around so that "please
refer to the previous question" no longer sends the reader with a
non-booting system to a PLIP cable wiring diagram!
* Mention the time/space requirements for making a custom install floppy.
* Acknowledge a couple of people whose answers I've adapted in various
places (and who deserve credit anyway for answering so many questions!)
I forgot his name whilst typing in the commit message on the
port, and he wasn't in the handbook (I guessed wrong, using Marc
Van Kempen, sorry to both). Now, his name is in here and I
won't get mixed up again!
Obtained from: Mark (not Marc!)
(1) Additional __FreeBSD_version's from <osreldate.h>. Closes PR
docs/1438.
Submitted by: "David E. O'Brien" <obrien@Nuxi.cs.ucdavis.edu>
(2) Make it clear that when submitting a port, the package is not
necassary.
Suggested by: joerg
(3) Recommend people to use send-pr to send us notifications of new
ports and upgrades so that they won't fall between the cracks.
Suggested by: a lot of people
(4) Add a section about Motif and describe REQUIRES_MOTIF and
MOTIFLIB.
Prodded by: chuckr
(5) Revise the licensing problems section and describe the two
variables RESTRICTED and NO_CDROM.
(6) Fill in the section about upgrading. In particular, recommend to
send in diffs of the old and new ports (these are "ports", not the
original source or anything!), so it's easier to see what has
changed.
Discourage the use of the EXB-2501 by now, and slightly improve the
formatting for this entry.
Correct some minor oddities for the Tandberg entries based on my input
data.
Minor addition to the <!-- tech> section for QIC.
Changed zones: Algeria, Egypt, Ghana, Libya, Morocco, Sierra Leone,
South Africa, Sudan, Tunisia, Armenia, Myanmar, China, Taiwan, Hong
Kong, Macao, Cyprus, Georgia, Iran, Israel, Jordan, Kazakhstan,
Kirgizstan, Lebanon, Mongolia, the Phillippines, Syria, Tajikistan,
Turkmenistan, Uzbekistan, Australia, Kiribati, New Caledonia, New
Zealand, Vanuatu, the United Kingdom, Ireland, the Czech Republic,
Finland, France, Greece, Hungary, Iceland, Italy, Luxembourg, the
Netherlands, Norway, Portugal, Romania, Spain, Switzerland, Turkey,
Canada, Mexico, the Bahamas, Barbados, Belize, Costa Rica, Cuba, the
Dominican Republic, El Salvador, Guatemala, Haiti, Nicaragua,
Brazil, the Falkland Islands, Paraguay
Deleted zones: Asia/Tomsk (superseded by Asia/Krasnoyarsk)
Added zones: Asia/Aktau (area formerly part of Asia/Alma-Ata);
Asia/Krasnoyarsk (supersedes Asia/Tomsk); America/Glace_Bay (area
formerly part of America/Halifax); America/Thunder_Bay,
America/Nipigon, America/Rainy_River (areas formerly covered by
America/Montreal); America/Swift_Current (area formerly part of
America/Regina); America/Dawson_Creek (area formerly part of
America/Vancouver); America/Pangnirtung, America/Iqaluit,
America/Rankin_Inlet, America/Yellowknife, America/Inuvik,
America/Dawson (areas formerly part of America/Whitehorse)
standards and to clean up some of the English. The job is
nowhere complete.
This man page would be a good project for someone who knows
something about the firewall software, and would like to
contribute to the documentation effort. Many of the things
in this man page are out of date and do not reflect reality.
This stuff should not be too destructive if the IPDIVERT is not compiled in..
be aware that this changes the size of the ip_fw struct
so ipfw needs to be recompiled to use it.. more changes coming to clean this up.
(suggested by Darryl Okahata).
* Add explanation of what virtual consoles are
(suggested by Francisco Reyes)
* Minor formatting change to fix docs/1378 (could some kind person
close this for me? Thanks!)
* Removed references to obsolete /usr/share/FAQ/Text directory.
* Added details of UK supplier of FreeBSD CDs.
* Made the consequences of running ``make world'' more explicit.
* More cleaning and tidying up.
comprehensive re-write later.
* Ruthlessly condense questions so they fit on a single line (the
TOC is now actually readable in lynx!). In one or two cases, this
has meant splitting up questions or incorporating part of the old
question into the answer.
* Make it clear that the question about disklabel'ing is actually
about adding a second hard disk, provide a _much_ simpler answer and
move it out of the installation section.
* Don't imply that the AHA2920 is supported (I suspect we will get a
lot of queries about this)
* Reword the non-serious questions to hint that the answer may not be
particularly informative...
* Correct typos and grammar, remove US-centric colloquialisms :-)
and many more.
based on the HD64570 chip. Both the 1 and 2 port cards is supported.
Line speeds of up to 2Mbps is possible. At this speed about 95% of the
bandwidth is usable with 486DX processors.
The standard FreeBSD sppp code is used for the link level layer. The
default protocol used is PPP. The Cisco HDLC protocol can be used by
adding "link2" to the ifconfig line in /etc/sysconfig or where ever
ifconfig is run.
At the moment only the X.21 interface is tested. The others may need
tweaks to the clock selection code.
