relating to O_RDWR file descriptors, which while not defined in POSIX,
are in fact used:
(1) Revise assumption that we have two file descriptors when testing I/O
operations on a fifo. Provide cleanup routines that handle either
two or three file descriptors (including a kqueue descriptor).
(2) Add an openfifo_rw() routine to supplement openfifo().
(3) kqueue_setup() now configures an existing kqueue to monitor a new
file descriptor, rather than allocating a new kqueue to monitor two
existing file descriptors.
(4) Wrap all direct poll/select/kqueue/FIONREAD interactions in a single
function, assert_status(), which takes a file descriptor, kqueue
descriptor, assertion of read/writable/exception states, and
test description, then tests the assertion. This reduces the bulk
of calls in many of the tests, making them shorter, more readable,
and easier to determine correct.
(5) Add a new test_events_rdwr() function, which performs a basic create/
write/read event test on a O_RDWR fifo file descriptor. This is
currently failed by our fifo code in HEAD due to a bug in FIONREAD
handling. Fix to be merged shortly.
Add test_kqueue(), which registers and unregisters various kqueue filter
types on a fifo in order to make sure that EVFILT_READ, EVFILT_WRITE can
be registered, and that EVFILT_NETDEV can't be registered. For now, we
don't test that EVFILT_VNODE can be registered on fifos, as that has been
broken at some point.
- Teach fifo_io about kqueue monitoring of fifo file descriptor status,
and add test cases for kqueue to match existing case for poll and
select. Add a new cleanup routine, cleanfifokq(), for use in tests that
use kqueues. kqueue_setup() sets up kqueue sessions, and kqueue_status()
returns file descriptor status.
- Correct a bug in select handling relating to the nfds argument, which
was incorrect so resulted in select occuring on the wrong file descriptor,
and possible false positive/negative results.
- Clarify error reporting in one byte write+read tests to distinguish
errors in the after case from the before case.
that don't obviously fit into create, open, and io. For now, add only a
regression test to make sure that lseek() fails with ESPIPE (which it
doesn't).
multicast group using a raw socket, then removing the interface on which
the group is found, and joining a multicast group using a udp socket,
then removing the interface on which the group is found. An if_disc
interface is used as the interface on which to attach.
NB: A panic currently results from running this regression test, so do
so with caution.
PR: 77665
Reported by: Gavin Atkinson <gavin dot atkinson at ury dot york dot ac dot uk>
Reported by: Brooks Davis <brooks at FreeBSD dot org>
stats provided by bpf(4). This program will live in tools/ for now
until we figure out where it will live permanently. Based on some
discussions on developers@, it is likely that we will be adding
this functionality to netstat(1) at some point.
The overall idea is to get a single build script which will not need
editing, but instead overrides and changes happen by config files passed
as arguments.
size-scheme. Also add commented NO_BIND_FOO options for people who want named
but not all of the bloat it likes to include by default.
While here, make a comment about BOOT_COMCONSOLE_SPEED.
most of the hardcoding of device names in installed convenience scripts.
Provide a new script (root/updatep) to easily update the ALTROOTSLICE. It
does the same as updatep1/updatep2 without hardcoded device names. If noone
protests, I'd like to get rid of updatep1/updatep2 at some point.
As an extra bonus: turn on the error led while updating (on hardware with a
led).
- Test that the basic socket options have the right defaults, that we can
change them, read them back, etc.
- Add and remove some multicast addresses.
- Send a loopback multicast address and make sure it arrives intact.
There's more that could be done here, but it's a start.
MFC after: 3 days
avg/median/stddev bars onto separate lines for readability if the
ranges overlapped. In 2005, ministat was extended to support more than
2 datasets, but the -s code was not updated. It will coredump if run
with -s and >2 sets.
PR: 82909
Submitted by: Dan Nelson <dnelson@allantgroup.com>
using my own script to handle it. I wrote my own partially because
of all the quoting-issues involved with testing what I wanted to test,
and partially because this lets me commit one script and one data file,
instead of one-file-per-regression-test.
This suite was good enough for my initial testing (and it did help me
find a few bugs that would have otherwise been missed). I'm not sure
how well it will work in general use, but I figured I might as well
commit it. It won't *hurt* to have it available. At the worst, people
can just ignore it.
Approved by: re (blanket `env')
o getsockopt(SO_ACCEPTFILTER) always returns success on listen socket
even we didn't install accept filter on the socket.
o Fix these bugs and add regression tests for them.
Submitted by: Igor Sysoev [1]
Reviewed by: alfred
MFC after: 2 weeks
so that make(1) will run in an almost clean environment and enhance the
description of the test infrastructure.
Add the ability to have multiple tests carried out per test script.
Give some tests more meaningful names.
Fix the usage message from the test scripts.
Make it possible to pass several commands to the test scripts like:
'sh test.t setup run compare clean'.
shell meta characters it is not passed to the shell, but the command
is executed directly (given that the line is not a shell builtin) and
that the line with a meta character is passed to the shell.
Currently only performs basic tests against the library string routines,
and queries less important kernel state.
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
MFC after: 3 days
order. Put some strategic comments in about how much storage is
necessary and a longer explanation on the top.
It is now pretty trivial to put nanoBSD on as little as a 64MB CF card.
Sponsored by: Soekris Engineering.
the limit is only the number of meaningful graph symbols available.
Statistical comparison is performed between the first dataset and
any further datasets.
No objection by: phk
intended to verify that SIGPIPE is delivered to a process writing or
sending on a socket that has been shut down for write. If available,
SO_NOSIGPIPE is also tested.
This regression test is currently passed by RELENG_4, but not by HEAD or
RELENG_5, due to a bug in the write() code for sockets. SO_NOSIGPIPE is not
present in RELENG_4, however, so is not tested there.
Reported by: Mikko Tyolajarvi <mbsd at pacbell dot net>
PR: 78478
native and foreign architectures and comparing products).
They eliminate most of the differences caused by different
object directory paths, timestamping, and identification.
(Note WORLDTMP was renamed to ${OBJTREE}${.CURDIR}/tmp.)
and adjust the path in the Makefile for the upgrade_checks target.
These checks are really feature upgrade checks that should be fast
and just find out whether we need to build a new make before
proceeding with other targets like buildworld. This makes the
place free for a real regression test suite in the old place.
http://www.ambrisko.com/doug/listio_kqueue/listio_kqueue.patch
Note: it is a good idea to run this against a physical drive to
exercise the physio fast path (ie. lio_kqueue /dev/<something safe>)
This will ensure op's counting per LIO request is correct. It is
currently broken the above patch fixes it.
Sponsored by: IronPort
against a disk as the argument. If you don't it will use a temp file.
The raw disk will use the kernel physio fast path method until the
max number of pending op's is reached then it will queue them. File
system op's are always queued. This is more important with LIO since
operation can get split across and accounting of op's is broken with LIO.
Note that this was broken when locking was added to kqueue (ie. 5.3)
My fix needs to be better integrated with FreeBSD.
Next is an LIO test and implementation.
Sponsored by: IronPort
modules to rip out the available sysctls. It will then produce a manual
page which may be installed with 'make install'. Currently typing 'make'
in the directory uses the default /boot/kernel files. To use a specific
directory, run sysdoc -k [location].
- Use fesetround() instead of fpsetround(), and add tests for
various rounding modes.
- Test that all NaNs generated are quiet.
Some of these tests won't pass until problems in vendor sources
(gdtoa and gcc) are fixed and new versions imported, but I
want to get these changes into the tree before I accidentally
blow them away again. :-(
tests. (Buy 10, get one free!) The separate categories were
already there; they just weren't labeled.
- Use fesetround() instead of fpsetround(), since the former is
standard and implemented on all supported architectures. Add
tests for each rounding mode.
- Add additional tests for subnormals.
Some of these tests won't pass until problems in vendor sources
(gdtoa and gcc) are fixed and new versions imported, but I
want to get these changes into the tree before I accidentally
blow them away.
introducing the disk formats for _RuneLocale and friends.
The disk formats do not have (useless) pointers and have 32-bit
quantities instead of rune_t and long. (htonl(3) only works
with 32-bit quantities, so there's no loss).
Bootstrap mklocale(1) when necessary. (Bootstrapping from 4.x
would be trivial (verified), but we no longer provide pre-5.3
source upgrades and this is the first commit to actually break
it.)
bind()/connect() system calls, which is intended to confirm that the
right successes and errors occur when rendezvousing via the file system
name space.
and as long as we're not compiling with IPA, gcc(1) won't optimize
the call away. The whole purpose of using memcpy(3) is to avoid
misaligned loads and stores when we need to read or write the value
in the unaligned memory location. But if gcc(1) optimizes the call
to memcpy(3) away, it will typically introduce misaligned loads and
stores. In this context that's not a good idea.
60. The postinc store tests currently fail (value mismatch). Hence
the score as of this commit is 48 out of 60. Either the kernel or
the tests need to be fixed.
the given providers. Without even one of the configured components there
should be no way to get the secret.
Supported by: WHEEL Sp. z o.o.
http://www.wheel.pl
cleaned up; just wanted to make a place holder. The biggest issue is
that it is an incomplete revamp; that is... the inconsistent naming
table generation is not done yet ... will be added soon with the clean
up. The purpose of this script is to handle the vop_vector changes that
phk@ did over the recent weeks.
float, double and long double types. No post-increment tests yet.
All tests are skipped if the debug.unaligned_test sysctl variable
cannot be set to 1.
as they are the setrunqueue() and sched_add() calls. Since they happen
immediately before the thread is placed on a run queue they would normally
dwarf the more informative preemption or yield event and it is implicitly
understood that a thread is back on the run queue as part of these events.
python and tkinter. Schedgraph takes input from files produces by
ktrdump -ct when KTR_SCHED is compiled into the kernel. The output
represents the states of each thread with colored line segments as well
as colored points for non-state scheduler events. Each line segment and
point is clickable to obtain extra detail.
