Just like /dev/devctl, /dev/fuse will now report the number of operations
available for immediate read in the kevent.data field during kevent(2).
Sponsored by: The FreeBSD Foundation
/dev/fuse was already pollable with poll and select. Add support for
kqueue, too. And add tests for polling with poll, select, and kqueue.
Sponsored by: The FreeBSD Foundation
* In the fatal_signal test, wait for the daemon to receive FUSE_INTERRUPT
before exiting.
* Explicitly disable restarting syscalls after SIGUSR2. This fixes
intermittency in the priority test. I don't know why, but sometimes that
test's mkdir would be restarted, and sometimes it would return EINTR.
ERESTART should be the default.
* Remove a useless copy/pasted sleep in the priority test.
Sponsored by: The FreeBSD Foundation
If the daemon dies, return ENOTCONN for all operations that have already
been sent to the daemon, as well as any new ones.
Sponsored by: The FreeBSD Foundation
When a FUSE daemon dies or closes /dev/fuse, all of that daemon's pending
requests must be terminated. Previously that was done in /dev/fuse's
.d_close method. However, d_close only gets called on the *last* close of
the device. That means that if multiple daemons were running concurrently,
all but the last daemon to close would leave their I/O hanging around. The
problem was easily visible just by running "kyua -v parallelism=2 test" in
fusefs's test directory.
Fix this bug by terminating a daemon's pending I/O during /dev/fuse's
cdvpriv dtor method instead. That method runs on every close of a file.
Also, fix some potential races in the tests:
* Clear SA_RESTART when registering the daemon's signal handler so read(2)
will return EINTR.
* Wait for the daemon to die before unmounting the mountpoint, so we won't
see an unwanted FUSE_DESTROY operation in the mock file system.
Sponsored by: The FreeBSD Foundation
* Convert from plain to TAP for slightly improved introspection when skipping
the tests due to requirements not being met.
* Test for the net/py-dpkt (origin) package being required when running the
tests, instead of relying on a copy of the dpkt.py module from 2014. This
enables the tests to work with py3. Subsequently, remove
`tests/sys/opencrypto/dpkt.py(c)?` via `make delete-old`.
* Parameterize out `python2` as `$PYTHON`.
PR: 237403
MFC after: 1 week
Some fusefs tests must sleep because they deliberately trigger a race, or
because they're testing the cache timeout functionality. Consolidate the
sleep interval in a single place so it will be easy to adjust. Shorten it
from either 500ms or 250ms to 100ms. From experiment I find that 10ms works
every time, so 100ms should be fairly safe.
Sponsored by: The FreeBSD Foundation
Replace some sleeps with semaphore operations. Not all sleeps can be
replaced, though. Some are trying to lose a race.
Sponsored by: The FreeBSD Foundation
libfuse expects sockets to be created with FUSE_MKNOD, not FUSE_CREATE,
because that's how Linux does it. My first attempt at creating sockets
(r346894) used FUSE_CREATE because FreeBSD uses VOP_CREATE for this purpose.
There are no backwards-compatibility concerns with this change, because
socket support hasn't yet been merged to head.
Sponsored by: The FreeBSD Foundation
Any change to a directory's contents should cause its mtime and ctime to be
updated by the FUSE daemon. Clear its attribute cache so we'll get the new
attributs the next time that they're needed. This affects the following
VOPs: VOP_CREATE, VOP_LINK, VOP_MKDIR, VOP_MKNOD, VOP_REMOVE, VOP_RMDIR, and
VOP_SYMLINK
Reported by: pjdfstest
Sponsored by: The FreeBSD Foundation
If the file to be renamed is a directory and it's going to get a new parent,
then the user must have write permissions to that directory, because the
".." dirent must be changed.
Reported by: pjdfstest
Sponsored by: The FreeBSD Foundation
FUSE_LINK returns a new set of attributes. fusefs should cache them just
like it does during other VOPs. This is not only a matter of performance
but of correctness too; without caching the new attributes the vnode's nlink
value would be out-of-date.
Reported by: pjdfstest
Sponsored by: The FreeBSD Foundation
Even an unprivileged user should be able to chown a file to its current
owner, or chgrp it to its current group. Those are no-ops.
Reported by: pjdfstest
Sponsored by: The FreeBSD Foundation
ftruncate should succeed as long as the file descriptor is writable, even if
the file doesn't have write permission. This is important when combined
with O_CREAT.
Reported by: pjdfstest
Sponsored by: The FreeBSD Foundation
Don't allow unprivileged users to set SGID on files to whose group they
don't belong. This is slightly different than what POSIX says we should do
(clear sgid on return from a successful chmod), but it matches what UFS
currently does.
Reported by: pjdfstest
Sponsored by: The FreeBSD Foundation
When mounted with -o default_permissions fusefs is supposed to validate all
permissions in the kernel, not the file system. This commit fixes two
permissions that I had previously overlooked.
* Only root may chown a file
* Non-root users may only chgrp a file to a group to which they belong
PR: 216391
Sponsored by: The FreeBSD Foundation
This test had been disabled because it was designed to check protocol
7.9-specific functionality. Enable it without the 7.9-specific bit.
Sponsored by: The FreeBSD Foundation
An off-by-one error led to the last page of a write not being removed from
its object, even though that page's buffer was marked as invalid.
PR: 235774
Sponsored by: The FreeBSD Foundation
Though it's not documented, Linux will interpret a FUSE_INTERRUPT response
of ENOSYS as "the file system does not support FUSE_INTERRUPT".
Subsequently it will never send FUSE_INTERRUPT again to the same mount
point. This change matches Linux's behavior.
PR: 346357
Sponsored by: The FreeBSD Foundation
`xrange` is a pre-python 2.x compatible idiom. Use `range` instead. The values
being iterated over are sufficiently small that using range on python 2.x won't
be a noticeable issue.
MFC after: 2 months
Replace `except Environment, e:` with `except Environment as e` for
compatibility between python 2.x and python 3.x.
While here, fix a bad indentation change from r346620 by reindenting the code
properly.
MFC after: 2 months
From r346443:
"""
Replace hard tabs with four-character indentations, per PEP8.
This is being done to separate stylistic changes from the tests from functional
ones, as I accidentally introduced a bug to the tests when I used four-space
indentation locally.
No functional change.
"""
MFC after: 2 months
Discussed with: jhb
The CCM test vectors use a slightly different file format in that
there are global key-value pairs as well as section key-value pairs
that need to be used in each test. In addition, the sections can set
multiple key-value pairs in the section name. The CCM KAT parser
class is an iterator that returns a dictionary once per test where the
dictionary contains all of the relevant key-value pairs for a given
test (global, section name, section, test-specific).
Note that all of the CCM decrypt tests use nonce and tag lengths that
are not supported by OCF (OCF only supports a 12 byte nonce and 16
byte tag), so none of the decryption vectors are actually tested.
Reviewed by: ngie
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D19978
Pass in an explicit digest length to the Crypto constructor since it
was assuming only sessions with a MAC key would have a MAC. Passing
an explicit size allows us to test the full digest in HMAC tests as
well.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D19884
This copes more gracefully when older version of the nist-kat package
are intalled that don't have newer test vectors such as CCM or plain
SHA.
If the nist-kat package is not installed at all, this still fails with
an error.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20034
r346162 factored out v_inval_buf_range from vtruncbuf, but it made an error
in the interface between the two. The result was a failure to remove
buffers past the first. Surprisingly, I couldn't reproduce the failure with
file systems other than fuse.
Also, modify fusefs's truncate_discards_cached_data test to catch this bug.
PR: 346162
Sponsored by: The FreeBSD Foundation
The zero-padding when printing out the Size field is on 32-bit architectures is
5, not 15. Adjust the regular expression to work with both the 32-bit and
64-bit case.
MFC after: 1 week
Reviewed by: lwhsu, markj
Approved by: emaste (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D20005
My wide sweeping stylistic change (while well intended) is impeding others from
working on `tests/sys/opencrypto`.
The plan is to revert the change in ^/head, then reintroduce the changes after
the other changes get merged into ^/head .
Approved by: emaste (mentor; implicit)
Requested by: jhb
MFC after: 2 months
Replace hard tabs with four-character indentations, per PEP8.
This is being done to separate stylistic changes from the tests from functional
ones, as I accidentally introduced a bug to the tests when I used four-space
indentation locally.
No functional change.
MFC after: 2 months
Approved by: emaste (mentor: implicit blanket approval for trivial fixes)
