members, thus making a signed extension of 32 bit register
context. If the register is not touched in usermode between
return from signal and next syscall entry, the sign-extension
part of 64bit register is not cleared, causing
linux32_fetch_syscall_args() to read wrong values.
Use unsigned type for the registers in the linux sigcontext.
Reported by: Jacob Frelinger <jacob.frelinger duke edu>, arundel
In collaboration with: dchagin
MFC after: 1 week
- Only check largs->num against max_ldt_segment on amd64 for I386_SET_LDT
when descriptors are provided. Specifically, allow the 'start == 0'
and 'num == 0' special case used to free all LDT entries that previously
failed with EINVAL.
Submitted by: clang via rdivacky (some of 1)
Reviewed by: kib
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init(). Consistently define mem_range_softc from
mem.c for all platforms. Add missing #include guards for machine/memdev.h
and sys/memrange.h. Clean up some nearby style(9) nits.
MFC after: 1 month
started to execute, it seems that the corresponding ISR bit in the "old"
local APIC can be cleared. This causes the local APIC interrupt routine
to fail to find an interrupt to service. Rather than panic'ing in this
case, simply return from the interrupt without sending an EOI to the
local APIC. If there are any other pending interrupts in other ISR
registers, the local APIC will assert a new interrupt.
Tested by: steve
setting SV_SHP flag and providing pointer to the vm object and mapping
address. Provide simple allocator to carve space in the page, tailored
to put the code with alignment restrictions.
Enable shared page use for amd64, both native and 32bit FreeBSD
binaries. Page is private mapped at the top of the user address
space, moving a start of the stack one page down. Move signal
trampoline code from the top of the stack to the shared page.
Reviewed by: alc
architecture macros (__mips_n64, __powerpc64__) when 64 bit types (and
corresponding macros) are different from 32 bit. [1]
Correct the type of INT64_MIN, INT64_MAX and UINT64_MAX.
Define (U)INTMAX_C as an alias for (U)INT64_C matching the type definition
for (u)intmax_t. Do this on all architectures for consistency.
Suggested by: bde [1]
Approved by: kib (mentor)
On some architectures UCHAR_MAX and USHRT_MAX had type unsigned int.
However, lacking integer suffixes for types smaller than int, their type
should correspond to that of an object of type unsigned char (or short)
when used in an expression with objects of type int. In that case unsigned
char (short) are promoted to int (i.e. signed) so the type of UCHAR_MAX and
USHRT_MAX should also be int.
Where MIN/MAX constants implicitly have the correct type the suffix has
been removed.
While here, correct some comments.
Reviewed by: bde
Approved by: kib (mentor)
for manipulating pcb_flags. These inline functions are very similar to
atomic_set_char(9) and atomic_clear_char(9) but without unnecessary LOCK
prefix for SMP. Add comments about the rationale[1]. Use these functions
wherever possible. Although there are some places where it is not strictly
necessary (e.g., a PCB is copied to create a new PCB), it is done across
the board for sake of consistency. Turn pcb_full_iret into a PCB flag as
it is safe now. Move rarely used fields before pcb_flags and reduce size
of pcb_flags to one byte. Fix some style(9) nits in pcb.h while I am in
the neighborhood.
Reviewed by: kib
Submitted by: kib[1]
MFC after: 2 months
the original amd64 and i386 headers with stubs.
Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.
Reviewed by: imp (previous version), jhb
Approved by: kib (mentor)
function always returned the nominal frequency instead of current frequency
because we use RDTSC instruction to calculate difference in CPU ticks, which
is supposedly constant for the case. Now we support cpu_get_nominal_mhz()
for the case, instead. Note it should be just enough for most usage cases
because cpu_est_clockrate() is often times abused to find maximum frequency
of the processor.
its similar disabling of adaptive mutexes and rwlocks. The existing
comment on why this is the case also applies to sx locks.
MFC after: 3 days
Discussed with: attilio
mark user FPU context initialized, if current context is user context.
It was reversed in r215865, by inadequate change of this code fragment
to a call to fpuuserinited()/npxuserinited().
The issue is only relevant for in-kernel users of FPU.
Reported by: Jan Henrik Sylvester <me janh de>, Mike Tancsa <mike sentex net>
Tested by: Mike Tancsa
MFC after: 3 days
to support PV drivers (such as xenpci), and non-adptive locking (along
with a comment about why).
This change eliminates the synchronisation problem between GENERIC and
XENHVM, which had become severely rotted in HEAD, and in 8-STABLE
included non-production kernel debugging features such as WITNESS.
However, it comes at the cost of enabling devices and options that may
not be present under Xen (such as random ethernet cards). For now, opt
for a simpler kernel configuration file rather than using nooptions/
nodevice to enumerate and eliminate them. This leads to a somewhat
larger XENHVM kernel.
This is an MFC candidate for 8-STABLE before 8.2, in order to provide
a production-worthy XENHVM kernel configuration for amd64.
Discussed with: gibbs, cperciva
Reported by: Piete Brooks <Piete.Brooks at cl.cam.ac.uk>
Sponsored by: DARPA, AFRL
MFC after: 3 days
while on i386 we have MAX_BPAGES=512. Implement this difference via
'#ifdef __i386__'.
With this commit, the i386 and amd64 busdma_machdep.c files become
identical; they will soon be replaced by a single file under sys/x86.
no-op currently, since FreeBSD/amd64 doesn't have (paravirtualized) Xen
support, but if/when that support is ever added we'll want this, and
until then it's harmless.
In exec_linux_setregs(), use locally cached pointer to pcb to set
pcb_full_iret.
In set_regs(), note that full return is needed when code that sets
segment registers is enabled.
MFC after: 1 week
execve(2). Note that ia32 binaries already handle this properly,
since ia32_setregs() resets td_retval[1], but not exec_setregs().
We still do not conform to the amd64 ABI specification, since %rsp
on the image startup is not aligned to 16 bytes.
PR: amd64/124134
Discussed with: Petr Salinger <Petr.Salinger seznam cz>
(who convinced me that there is indeed several bugs)
MFC after: 1 week
Passing a count of zero on i386 and amd64 for [I386|AMD64]_BUS_SPACE_MEM
causes a crash/hang since the 'loop' instruction decrements the counter
before checking if it's zero.
PR: kern/80980
Discussed with: jhb
functions, they are unused. Remove 'user' from npxgetuserregs()
etc. names.
For {npx,fpu}{get,set}regs(), always use pcb->pcb_user_save for FPU
context storage. This eliminates the need for ugly copying with
overwrite of the newly added and reserved fields in ucontext on i386
to satisfy alignment requirements for fpusave() and fpurstor().
pc98 version was copied from i386.
Suggested and reviewed by: bde
Tested by: pho (i386 and amd64)
MFC after: 1 week
