Semantics are almost identical. Some code is deduplicated and there are
fewer memory accesses.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D23158
After r355693, random(6) -f sometimes fail to output all the lines of the
input file. This is because the range from which random indices are chosen
is too big, so occasionally the random selection doesn't correspond to any
line and nothing gets printed.
(Ed. note: Mea culpa. Working on r355693, I was confused by the sometime
use of 1-indexing, sometimes 0-indexing in randomize_fd().)
Submitted by: Ryan Moeller <ryan AT freqlabs.com>
X-MFC-With: r355693
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D23199
Extended attribute values can potentially be quite large. One test for ZFS
is supposed to set a 200MB xattr. However, the buffer size for reading
values from stdin with setextattr -i is so small that the test times out
waiting for tiny chunks of data to be buffered and appended to an sbuf.
Increasing the buffer size should help alleviate some of the burden of
reallocating larger sbufs when writing large extended attributes.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D23211
The gpio controller in rockchips SoC in a child of the pinctrl driver
and cannot control pullups and pulldowns.
Use the new fdt_pinctrl interface for accessing pin capabilities and
setting them.
We can now report that every pins is capable of being IN or OUT function
and PULLUP PULLDOWN.
If the pin isn't in gpio mode no changes will be allowed.
Reviewed by: ganbold (previous version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22849
Most of the gpio controller cannot configure or get the configuration
of the pin muxing as it's usually handled in the pinctrl driver.
But they can know what is the pinmuxing driver either because they are
child of it or via the gpio-range property.
Add some new methods to fdt_pinctrl that a pin controller can implement.
Some methods are :
fdt_pinctrl_is_gpio: Use to know if the pin in the gpio mode
fdt_pinctrl_set_flags: Set the flags of the pin (pullup/pulldown etc ...)
fdt_pinctrl_get_flags: Get the flags of the pin (pullup/pulldown etc ...)
The defaults method returns EOPNOTSUPP.
Reviewed by: ian, bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23093
Some consumer cannot know the voltage of the regulator without it.
While here, refuse to attach is min_voltage != max_voltage, it
shouldn't happens anyway.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23003
The target-supply regulator is optional so don't fail if it's not present.
While here disable the clock on detach.
MFC after: 2 weeks
X-MFC-With: 356600
Each GPIO bank is powered by a different pin and so can be powered at different
voltage from different regulators.
Add a new config that now hold the pinmux data and the banks available on each
SoCs.
Since the aw_gpio driver being also the pinmux one it's attached before the PMIC
so add a config_intrhook_oneshot function that will enable the needed regulators
when the system is fully functional.
MFC after: 2 weeks
This method will set the desired voltaged based on values in the DTS.
It will not enable the regulator, this is the job of either a consumer
or regnode_set_constraint SYSINIT if the regulator is boot_on or always_on.
MFC after: 2 weeks
Profiling library archives are part of the development environment; they
don't need to be in separate -profile packages.
(In fact we can probably just eliminate the _p.a archives assuming that
profiling will be done using hwpmc etc., but that is a change for later.)
Discussed with: bapt, manu
Sponsored by: The FreeBSD Foundation
'install' target is invoked.
While here, bump the sample output version name, and explicitly
add the 'obj' target to avoid polluting the src checkout.
Submitted by: Trond Endrestol
PR: 243287 (related)
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (netgate.com)
`cat -l` is needed during the installworld phase and other system's cat
don't support that flag. To avoid portability issues when compiling on
Linux/macOS (such as the the direct access to &fp->_mbstate), we
disable the entire multibyte support when building as a boostrap tool.
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D13939
On these systems the (u)int64_t typedefs will not be implicitly defined by the
previous includes, so include <stdint.h> in the header that uses uint64_t.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D23202
[MIPS][ELF] Use PC-relative relocations in .eh_frame when possible
When compiling position-independent executables, we now use
DW_EH_PE_pcrel | DW_EH_PE_sdata4. However, the MIPS ABI does not define a
64-bit PC-relative ELF relocation so we cannot use sdata8 for the large
code model case. When using the large code model, we fall back to the
previous behaviour of generating absolute relocations.
With this change clang-generated .o files can be linked by LLD without
having to pass -Wl,-z,notext (which creates text relocations).
This is simpler than the approach used by ld.bfd, which rewrites the
.eh_frame section to convert absolute relocations into relative references.
I saw in D13104 that apparently ld.bfd did not accept pc-relative relocations
for MIPS ouput at some point. However, I also checked that recent ld.bfd
can process the clang-generated .o files so this no longer seems true.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72228
Merge commit 8e8ccf47 from llvm git (by me)
[MIPS] Don't emit R_(MICRO)MIPS_JALR relocations against data symbols
The R_(MICRO)MIPS_JALR optimization only works when used against functions.
Using the relocation against a data symbol (e.g. function pointer) will
cause some linkers that don't ignore the hint in this case (e.g. LLD prior
to commit 5bab291) to generate a relative branch to the data symbol
which crashes at run time. Before this patch, LLVM was erroneously emitting
these relocations against local-dynamic TLS function pointers and global
function pointers with internal visibility.
Reviewers: atanasyan, jrtc27, vstefanovic
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72571
These two changes should allow using lld for MIPS64 (and maybe also MIPS32)
by default.
The second commit is not strictly necessary for clang+lld since LLD9 will
not perform the R_MIPS_JALR optimization (it was only added for 10) but it
is probably required in order to use recent ld.bfd.
Reviewed By: dim, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23203
This enables virtio modules on PowerPC* target.
On PowerPC64, drivers are also kernel builtin.
QEMU currently needs to be patched to in order to work on LE hosts due to known
issue affecting pre-1.0 (legacy) virtio drivers.
The patch was submitted to QEMU mail list by @afscoelho_gmail.com, available at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg01496.html
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22833
Take advantage of global ordering introduced in r356672.
Reviewed by: mckusick (previous version)
Differential Revision: https://reviews.freebsd.org/D23067
ordering to allocate early pages in the same way boot pages were but only
as needed. After the KVA allocator has started up we allocate the KVA that
we consumed during boot. This also makes the boot pages freeable since they
have vm_page structures allocated with the rest of memory.
Parts of this patch were written and tested by markj.
Reviewed by: glebius, markj
Differential Revision: https://reviews.freebsd.org/D23102
For copies shorter than 512 bytes, the data is copied using plain
ld/std instructions.
For 512 bytes or more, the copy is done in 3 phases:
Phase 1: copy from the src buffer until it's aligned at a 16-byte boundary
Phase 2: copy as many aligned 64-byte blocks from the src buffer as possible
Phase 3: copy the remaining data, if any
In phase 2, this code uses VSX instructions when available. Otherwise,
it uses ldx/stdx.
Submitted by: Luis Pires <lffpires_ruabrasil.org> (original version)
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D15118
Assembly optimization of strncpy for PowerPC64, using double words
instead of bytes to copy strings.
Submitted by: Leonardo Bianconi <leonardo.bianconi_eldorado.org.br> (original version)
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D15369
Assembly optimization of strcpy for PowerPC64, using double words
instead of bytes to copy strings.
Submitted by: Leonardo Bianconi <leonardo.bianconi_eldorado.org.br> (original version)
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D15368
mount point while numerous tests are running that are writing to
files on that mount point cause the unmount(8) to hang forever.
The unmount(8) system call is handled in the kernel by the dounmount()
function. The cause of the hang is that prior to dounmount() calling
VFS_UNMOUNT() it is calling VFS_SYNC(mp, MNT_WAIT). The MNT_WAIT
flag indicates that VFS_SYNC() should not return until all the dirty
buffers associated with the mount point have been written to disk.
Because user processes are allowed to continue writing and can do
so faster than the data can be written to disk, the call to VFS_SYNC()
can never finish.
Unlike VFS_SYNC(), the VFS_UNMOUNT() routine can suspend all processes
when they request to do a write thus having a finite number of dirty
buffers to write that cannot be expanded. There is no need to call
VFS_SYNC() before calling VFS_UNMOUNT(), because VFS_UNMOUNT() needs
to flush everything again anyway after suspending writes, to catch
anything that was dirtied between the VFS_SYNC() and writes being
suspended.
The fix is to simply remove the unnecessary call to VFS_SYNC() from
dounmount().
Reported by: Peter Holm
Analysis by: Chuck Silvers
Tested by: Peter Holm
MFC after: 7 days
Sponsored by: Netflix
The utility here seems somewhat limited, but clang will attempt to generate
.eh_frame and actively fail in doing so. It is perhaps worth investigating
why it's being generated in the first place (GCC doesn't do so), but this
isn't a high priority.
This can happen if a file is closed during unix socket GC. The same bug
was fixed for devfs descriptors in r228361.
PR: 242913
Reported and tested by: iz-rpi03@hs-karlsruhe.de
Reviewed by: hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23178
In the WITHOUT_ descriptions we don't need to mention that ld.bfd is
limited to powerpc. When WITHOUT_BINUTILS is specified ld.bfd is not
installed on any CPU architecture.
subsystems tend to need to know about it, and including if_var.h is
huge header pollution for them. Polluting possible non-network
users with single symbol seems much lesser evil.
- Remove non-preemptible network epoch. Not used yet, and unlikely
to get used in close future.
The only reason to vlazy there is to (overzealously) ensure all vnodes
which need to be visited by msync scan can be found there.
In particluar this is of no use zfs and tmpfs.
While here depessimize the check.
They were introduced to take care of ifunc, but right now no architecture
provides ifunc'ed variants. Since rtld uses memset extensively this results in
a pessmization. Should someone want to use ifunc here they should provide a
mandatory symbol (e.g., rtld_memset).
See the review for profiling data.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23176
twice. Once to update the changed inodes, and a second time to update
changed quota information. This change merges these two scans into a
single scan which does both inode and quota updates.
MFC after: 7 days
