Add documentation and symlinks for OF_getprop_alloc_multi
and OF_getencprop_alloc_multi functions.
Also while here fix copy-pasted .Dt value and add one more
failure condition for OF_getencprop_alloc.
r332341 introduced OF_getencprop_alloc_multi that should be used
instead of OF_getencprop_alloc to get multi-cell properties.
Fix example to reflect this change.
Normally pf rules are expected to do one of two things: pass the traffic or
block it. Blocking can be silent - "drop", or loud - "return", "return-rst",
"return-icmp". Yet there is a 3rd category of traffic passing through pf:
Packets matching a "pass" rule but when applying the rule fails. This happens
when redirection table is empty or when src node or state creation fails. Such
rules always fail silently without notifying the sender.
Allow users to configure this behaviour too, so that pf returns an error packet
in these cases.
PR: 226850
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
MFC after: 1 week
Sponsored by: InnoGames GmbH
This makes it possible, through src.conf(5) settings, to select which
LLVM targets you want to build during buildworld. The current list is:
* (WITH|WITHOUT)_LLVM_TARGET_AARCH64
* (WITH|WITHOUT)_LLVM_TARGET_ARM
* (WITH|WITHOUT)_LLVM_TARGET_MIPS
* (WITH|WITHOUT)_LLVM_TARGET_POWERPC
* (WITH|WITHOUT)_LLVM_TARGET_SPARC
* (WITH|WITHOUT)_LLVM_TARGET_X86
To not influence anything right now, all of these are on by default, in
situations where clang is enabled.
Selectively turning a few targets off manually should work. Turning on
only one target should work too, even if that target does not correspond
to the build architecture. (In that case, LLVM_NATIVE_ARCH will not be
defined, and you can only use the resulting clang executable for
cross-compiling.)
I performed a few measurements on one of the FreeBSD.org reference
machines, building clang from scratch, with all targets enabled, and
with only the x86 target enabled. The latter was ~12% faster in real
time (on a 32-core box), and ~14% faster in user time. For a full
buildworld the difference will probably be less pronounced, though.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11077
Implement a ddb function walking the namecache to do this.
Reviewed by: jhb, mjg
Inspired by: gdb macro from jhb (old version)
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14898
The nvlist_append_{bool,number,string,nvlist,descriptor}_array() functions
allows to dynamically extend array stored in the nvlist.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
All information which are need for those operations is already stored in
the cookie.
We decided not to bump libnv version because this API is not used yet in the
base system.
Reviewed by: pjd
objdump is sometimes used in cases where readelf is more appropriate,
but the obsolete GNU objdump we have in the base system will be removed
in the future.
.Xr readelf from elf.5 to improve the odds the more appropriate tool
will be found.
PR: 229046
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The handbooks are not installed there anymore. While here, improve the
URLs markup a bit.
Reviewed by: allanjude@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15793
Most kernel memory that is allocated after boot does not need to be
executable. There are a few exceptions. For example, kernel modules
do need executable memory, but they don't use UMA or malloc(9). The
BPF JIT compiler also needs executable memory and did use malloc(9)
until r317072.
(Note that a side effect of r316767 was that the "small allocation"
path in UMA on amd64 already returned non-executable memory. This
meant that some calls to malloc(9) or the UMA zone(9) allocator could
return executable memory, while others could return non-executable
memory. This change makes the behavior consistent.)
This change makes malloc(9) return non-executable memory unless the new
M_EXEC flag is specified. After this change, the UMA zone(9) allocator
will always return non-executable memory, and a KASSERT will catch
attempts to use the M_EXEC flag to allocate executable memory using
uma_zalloc() or its variants.
Allocations that do need executable memory have various choices. They
may use the M_EXEC flag to malloc(9), or they may use a different VM
interfact to obtain executable pages.
Now that malloc(9) again allows executable allocations, this change also
reverts most of r317072.
PR: 228927
Reviewed by: alc, kib, markj, jhb (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15691
Lack of functioning link and activity LEDs on devices without an EEPROM
is expected (not a bug). Quoting the EVB-LAN7850 User's Guide:
When configured with the default internal register settings, the
Ethernet Link status LEDs are not enabled. To enable Ethernet Link
status LEDs, enable the EEPROM.
This is an artifact of the different ways in which the evaluation board
can be used. End-user USB-Ethernet adapters using the Microchip LAN78XX
or LAN7515 controllers should use an EEPROM or have OTP configuration,
if their product configuration does not match the boot default register
configuration.
Sponsored by: The FreeBSD Foundation
Differences between LAN7800 and LAN7850 from the driver's perspective:
* The LAN7800 muxes EEPROM signals with LEDs, so LED mode needs to be
disabled when reading/writing EEPROM. The EEPROM is not muxed on the
LAN7850.
* The Linux driver enables automatic duplex and speed detection when
there is no EEPROM, for the LAN7800 only. With this FreeBSD driver
LAN7850-based adapters without a configuration EEPROM fail to link
(with or without the automatic duplex and speed detection code), so
I have just followed the example of the Linux driver for now.
Sponsored by: The FreeBSD Foundation
Sponsored by: Microchip (hardware)
These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
callbacks to perform additional cleanup actions at the time a socket is
closed.
Michio Honda presented a use for this at BSDCan 2018.
(See https://www.bsdcan.org/2018/schedule/events/965.en.html .)
Submitted by: Michio Honda <micchie at sfc.wide.ad.jp> (previous version)
Reviewed by: lstewart (previous version)
Differential Revision: https://reviews.freebsd.org/D15706
of needed interface when many gif interfaces are present.
Remove rmlock from gif_softc, use epoch(9) and CK_LIST instead.
Move more AF-related code into AF-related locations.
Use hash table to speedup lookup of needed softc. Interfaces
with GIF_IGNORE_SOURCE flag are stored in plain CK_LIST.
Sysctl net.link.gif.parallel_tunnels is removed. The removal was planed
16 years ago, and actually it could work only for outbound direction.
Each protocol, that can be handled by if_gif(4) interface is registered
by separate encap handler, this helps avoid invoking the handler
for unrelated protocols (GRE, PIM, etc.).
This change allows dramatically improve performance when many gif(4)
interfaces are used.
Sponsored by: Yandex LLC
or 4 CPUs. Add a compile-time option SC_KERNEL_CONS_ATTRS to control the
defaults.
Default to color numbers in reverse order to CPU numbers (instead of
in the same order with white first and wrapping to dark grey), so that
the brightest bright colors are used first. Don't use dark grey at all;
replace it by dark green.
Syscons has too many compile-time options, but this one is needed in
in case the defaults give something like white on white, or the user
really hates this feature and can't wait to turn it off in rc.
MFC after: next release?
when to use assert, as well as providing a bad example of using
assert. While not strictly necessary, experience has shown issues
with poor assert choice happen often enough that this departure seems
warranted. Also, tighten up the previous example (there's no need
to have extra paragraphs or gratuitously long lines).
Reviewed by: emaste@ (earlier version)
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
It seems a shame to ruin the patina of the June 4, 1993 date
on abort.3, especially since it still matched the date of
the SCCS ID, but those are the rules.
Reported by: araujo
MFC after: 3 days
Sponsored by: Dell EMC
I didn't know abort2 existed until it was mentioned on a mailing list.
Mention it in related pages so others can find it easily.
MFC after: 3 days
Sponsored by: Dell EMC
