Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
Linux execve() gets audited as AUE_EXECVE as well, we should also interpret
the return from this correctly for the same reasoning as in r367002.
MFC with: r367002
The former clobbers some registers that shouldn't be touched.
Reviewed by: kib (earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26406
Since LA57 was moved to the main SDM document with revision 072, it
seems that we should have a support for it, and silicons are coming.
This patch makes pmap support both LA48 and LA57 hardware. The
selection of page table level is done at startup, kernel always
receives control from loader with 4-level paging. It is not clear how
UEFI spec would adapt LA57, for instance it could hand out control in
LA57 mode sometimes.
To switch from LA48 to LA57 requires turning off long mode, requesting
LA57 in CR4, then re-entering long mode. This is somewhat delicate
and done in pmap_bootstrap_la57(). AP startup in LA57 mode is much
easier, we only need to toggle a bit in CR4 and load right value in CR3.
I decided to not change kernel map for now. Single PML5 entry is
created that points to the existing kernel_pml4 (KML4Phys) page, and a
pml5 entry to create our recursive mapping for vtopte()/vtopde().
This decision is motivated by the fact that we cannot overcommit for
KVA, so large space there is unusable until machines start providing
wider physical memory addressing. Another reason is that I do not
want to break our fragile autotuning, so the KVA expansion is not
included into this first step. Nice side effect is that minidumps are
compatible.
On the other hand, (very) large address space is definitely
immediately useful for some userspace applications.
For userspace, numbering of pte entries (or page table pages) is
always done for 5-level structures even if we operate in 4-level mode.
The pmap_is_la57() function is added to report the mode of the
specified pmap, this is done not to allow simultaneous 4-/5-levels
(which is not allowed by hw), but to accomodate for EPT which has
separate level control and in principle might not allow 5-leve EPT
despite x86 paging supports it. Anyway, it does not seems critical to
have 5-level EPT support now.
Tested by: pho (LA48 hardware)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
This is a step towards facilitating jails with only Linux binaries.
Supporting emul_path adds path lookups which are completely spurious
if the binary at hand runs in a Linux-based root directory.
It defaults to on (== current behavior).
make -C /root/linux-5.3-rc8 -s -j 1 bzImage:
use_emul_path=1: 101.65s user 68.68s system 100% cpu 2:49.62 total
use_emul_path=0: 101.41s user 64.32s system 100% cpu 2:45.02 total
This effectively mirrors our libc implementation, but with minor fudging --
name needs to be copied in from userspace, so we just copy it straight into
stack-allocated memfd_name into the correct position rather than allocating
memory that needs to be cleaned up.
The sealing-related fcntl(2) commands, F_GET_SEALS and F_ADD_SEALS, have
also been implemented now that we support them.
Note that this implementation is still not quite at feature parity w.r.t.
the actual Linux version; some caveats, from my foggy memory:
- Need to implement SHM_GROW_ON_WRITE, default for memfd (in progress)
- LTP wants the memfd name exposed to fdescfs
- Linux allows open() of an fdescfs fd with O_TRUNC to truncate after dup.
(?)
Interested parties can install and run LTP from ports (devel/linux-ltp) to
confirm any fixes.
PR: 240874
Reviewed by: kib, trasz
Differential Revision: https://reviews.freebsd.org/D21845
in vanilla Linux git tree.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25385
FreeBSD madvise(2) directly. While some of the flag values match,
most don't.
PR: kern/230160
Reported by: markj
Reviewed by: markj
Discussed with: brooks, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25272
Use AUXARGS_ENTRY_PTR to export these pointers. This is a followup to
r359987 and r359988.
Reviewed by: jhb
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24446
Copy the CP, PTRIN, etc macros from freebsd32.h into a sys/abi_compat.h
and replace existing definitation with includes where required. This
eliminates duplicate code and allows Linux and FreeBSD compatability
headers to be included in the same files.
Input from: cem, jhb
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24275
Submitted by: Bora Özarslan <borako.ozarslan@gmail.com>
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19917
messages for some of the unimplemented syscalls, in particular
the AIO-related ones.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23231
r355473 vastly improved the readability and cleanliness of these Makefiles.
Every single one of them follows the same pattern and duplicates the exact
same logic.
Now that we have GENERATED/SRCS, split SRCS up into the two parameters we'll
use for ${MAKESYSCALLS} rather than assuming a specific ordering of SRCS and
include a common sysent.mk to handle the rest. This makes it less tedious to
make sweeping changes.
Some default values are provided for GENERATED/SYSENT_*; almost all of these
just use a 'syscalls.master' and 'syscalls.conf' in cwd, and they all use
effectively the same filenames with an arbitrary prefix. Most ABIs will be
able to get away with just setting GENERATED_PREFIX and including
^/sys/conf/sysent.mk, while others only need light additions. kern/Makefile
is the notable exception, as it doesn't take a SYSENT_CONF and the generated
files are spread out between ^/sys/kern and ^/sys/sys, but it otherwise fits
the pattern enough to use the common version.
Reviewed by: brooks, imp
Nice!: emaste
Differential Revision: https://reviews.freebsd.org/D23197
When either makesyscalls.lua or syscalls.master changes, all of the
${GENERATED} targets are now out-of-date. With make jobs > 1, this means we
will run the makesyscalls script in parallel for the same ABI, generating
the same set of output files.
Prior to r356603 , there is a large window for interlacing output for some
of the generated files that we were generating in-place rather than staging
in a temp dir. After that, we still should't need to run the script more
than once per-ABI as the first invocation should update all of them. Add
.ORDER to do so cleanly.
Reviewed by: brooks
Discussed with: sjg
Differential Revision: https://reviews.freebsd.org/D23099
syscall is to query the CPU number and the NUMA domain the calling
thread is currently running on. The third argument is ignored.
It doesn't do anything regarding scheduling - it's literally
just a way to query the current state, without any guarantees
you won't get rescheduled an opcode later.
This unbreaks Java from CentOS 8
(java-11-openjdk-11.0.5.10-0.el8_0.x86_64).
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22972
copy_file_range(2) is implemented natively since r350315, make it available
for Linux binaries too.
Reviewed by: kib (mentor), trasz (previous version)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D22959
than "/compat/linux". Useful when you have several compat directories
with different Linux versions and you don't want to clash with files
installed by linux-c7 packages.
Reviewed by: bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22574
over the usual fsync(2).
This silences some warnings when running "apt-get upgrade".
Reviewed by: brooks, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22371
Partially revert r354741 and r354754 and go back to allocating a
fixed-size chunk of stack space for the auxiliary vector. Keep
sv_copyout_auxargs but change it to accept the address at the end of
the environment vector as an input stack address and no longer
allocate room on the stack. It is now called at the end of
copyout_strings after the argv and environment vectors have been
copied out.
This should fix a regression in r354754 that broke the stack alignment
for newer Linux amd64 binaries (and probably broke Linux arm64 as
well).
Reviewed by: kib
Tested on: amd64 (native, linux64 (only linux-base-c7), and i386)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22695
Use the power of variable to avoid spelling out source and generated
files too many times. The previous Makefiles were hard to read, hard to
edit, and badly formatted.
Reviewed by: kevans, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22714
- Use ustringp for the location of the argv and environment strings
and allow destp to travel further down the stack for the stackgap
and auxv regions.
- Update the Linux copyout_strings variants to move destp down the
stack as was done for the native ABIs in r263349.
- Stop allocating a space for a stack gap in the Linux ABIs. This
used to hold translated system call arguments, but hasn't been used
since r159992.
Reviewed by: kib
Tested on: md64 (amd64, i386, linux64), i386 (i386, linux)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22501
flua is bootstrapped as part of the build for those on older
versions/revisions that don't yet have flua installed. Once upgraded past
r354833, "make sysent" will again naturally work as expected.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D21894
Move futex_mtx to linux_common.ko for amd64 and aarch64 along
with respective list/mutex init/destroy.
PR: 240989
Reported by: Alex S <iwtcex@gmail.com>
