- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.
- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.
Tested with Netgear WG111 v3 (urtw(4)), STA mode.
MFC after: 2 weeks
like this:
pqisrc_build_sgl() at pqisrc_build_sgl+0x8d/frame 0xfffffe009e8b7a00
pqisrc_build_raid_io() at pqisrc_build_raid_io+0x231/frame 0xfffffe009e8b7a40
pqisrc_build_send_io() at pqisrc_build_send_io+0x375/frame 0xfffffe009e8b7b00
pqi_request_map_helper() at pqi_request_map_helper+0x282/frame 0xfffffe009e8b7ba0
bus_dmamap_load_ccb() at bus_dmamap_load_ccb+0xd7/frame 0xfffffe009e8b7c00
pqi_map_request() at pqi_map_request+0x9b/frame 0xfffffe009e8b7c70
pqisrc_io_start() at pqisrc_io_start+0x55c/frame 0xfffffe009e8b7d50
smartpqi_cam_action() at smartpqi_cam_action+0xb8/frame 0xfffffe009e8b7de0
xpt_run_devq() at xpt_run_devq+0x30a/frame 0xfffffe009e8b7e40
xpt_action_default() at xpt_action_default+0x94b/frame 0xfffffe009e8b7e90
dastart() at dastart+0x33b/frame 0xfffffe009e8b7ee0
xpt_run_allocq() at xpt_run_allocq+0x1a2/frame 0xfffffe009e8b7f30
dastrategy() at dastrategy+0x71/frame 0xfffffe009e8b7f60
g_disk_start() at g_disk_start+0x351/frame 0xfffffe009e8b7fc0
g_io_request() at g_io_request+0x3cf/frame 0xfffffe009e8b8010
g_part_start() at g_part_start+0x120/frame 0xfffffe009e8b8090
g_io_request() at g_io_request+0x3cf/frame 0xfffffe009e8b80e0
zio_vdev_io_start() at zio_vdev_io_start+0x4b2/frame 0xfffffe009e8b8140
zio_execute() at zio_execute+0x17c/frame 0xfffffe009e8b8180
zio_nowait() at zio_nowait+0xc4/frame 0xfffffe009e8b81b0
vdev_queue_io_done() at vdev_queue_io_done+0x138/frame 0xfffffe009e8b81f0
zio_vdev_io_done() at zio_vdev_io_done+0x151/frame 0xfffffe009e8b8220
zio_execute() at zio_execute+0x17c/frame 0xfffffe009e8b8260
taskqueue_run_locked() at taskqueue_run_locked+0x10c/frame 0xfffffe009e8b82c0
taskqueue_thread_loop() at taskqueue_thread_loop+0x88/frame 0xfffffe009e8b82f0
fork_exit() at fork_exit+0x84/frame 0xfffffe009e8b8330
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe009e8b8330
Reviewed by: deepak.ukey_microsemi.com, sbruno
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D19470
FreeBSD base system does not provide an ACPI handler for the PC/AT RTC/CMOS
device with PnP ID PNP0B00; on some HP laptops, the absence of this handler
causes suspend/resume and poweroff(8) to hang or fail [1], [2]. On these
laptops EC _REG method queries the RTC date/time registers via ACPI
before suspending/powering off. The handler should be registered before
acpi_ec driver is loaded.
This change adds handler to access CMOS RTC operation region described in
section 9.15 of ACPI-6.2 specification [3]. It is installed only for ACPI
version of atrtc(4) so it should not affect old ACPI-less i386 systems.
It is possible to disable the handler with loader tunable:
debug.acpi.disabled=atrtc
Informational debugging printf can be enabled by setting hw.acpi.verbose=1
in loader.conf
[1] https://wiki.freebsd.org/Laptops/HP_Envy_6Z-1100
[2] https://wiki.freebsd.org/Laptops/HP_Notebook_15-af104ur
[3] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf
PR: 207419, 213039
Submitted by: Anthony Jenkins <Scoobi_doo@yahoo.com>
Reviewed by: ian
Discussed on: acpi@, 2013-2015, several threads
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19314
trying to use disk_add_alias() to make spi* an alias for mx25l*. It turns
out disk_add_alias() works for partitions, but not slices, and that's hard
to fix.
This change is, in effect, a partial revert of r344526.
The mips world relies on the existence of flashmap names formatted as
/dev/flash/spi0s.name, whereas pretty much nothing relies on at45d devices
using the /dev/spi* names (because until recently the at45d driver didn't
even work reliably). So this change makes mx25l devices the sole owner of
the /dev/flash/spi* namespace, which actually makes some sense because it is
a SpiFlash(tm) device, so flash/spi isn't a horrible name.
Reported by: Mori Hiroki <yamori813@yahoo.co.jp>
PFIL_MEMPTR flag are intentionally providing a memory address that
isn't aligned to pointer alignment. This is done to align an IPv4
or IPv6 header that is expected to follow Ethernet header.
When we return PFIL_REALLOCED we store a pointer to allocated mbuf
at this address. With this change the KPI changes to store the pointer
at aligned address, which usually yields in +2 bytes.
Provide two inlines:
pfil_packet_align() to get aligned pfil_packet_t for a misaligned one
pfil_mem2mbuf() to read out mbuf pointer from misaligned pfil_packet_t
Provide function pfil_realloc(), not used yet, that would convert a
memory pfil_packet_t to an mbuf one.
Reported by: hps
Reviewed by: hps, gallatin
Registers visible from 'show reg' don't always match the registers from the
offending trap frame. Knowing the frame address lets one examine the
registers manually.
MFC after: 1 week
In r324227 the comment moved into socketvar.h originally from
sockstate.h r180948. Try to improve English and as a consequence rewrap
the comment.
No functional changes.
Reviewed by: jhb (a wording suggestion)
Differential Revision: https://reviews.freebsd.org/D13865
retries.
When resetting the controller, we abort I/O. Prior to this fix, we
printed a ton of abort messages for I/O that we're going to
retry. This imparts no useful information. Stop printing them unless
our retry count is exhausted. Clarify code for when we don't retry,
and remove useless arg to a routine that's always called with it
as 'true'. All the other debug is still printed (including multiple
reset messages if we have multiple timeouts before the taskqueue
runs the actual reset) so that we know when we reset.
Reviewed by: jimharris@, chuck@
Differential Revision: https://reviews.freebsd.org/D19431
r344504 added an extra ARP_LOG() call in case of an if_output() failure.
It turns out IPv4 can be noisy. In order to not spam the console by default:
(a) add a counter for these events so people can keep better track of how
often it happens, and
(b) add a sysctl to select the default ARP_LOG log level and set it to
INFO avoiding the one (the new) DEBUG level by default.
Claim a spare (1st one after 10 years since the stats were added) in order
to not break netstat from FreeBSD 12->13 updates in the future.
Reviewed by: karels
Differential Revision: https://reviews.freebsd.org/D19490
The LBA weighting makes sense on rotational media where the outer tracks
have twice the bandwidth of the inner tracks. However, it is detrimental
on nonrotational media such as solid state disks, where the only effect
is to ensure that metaslabs enter the best-fit allocation behavior
sooner, which is detrimental to performance. It also makes no sense on
files where the underlying filesystem can arrange things however it
wants.
Author: Richard Yao <ryao@gentoo.org>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3712zfsonlinux/zfs@fb40095f5f
To reduce code divergence this merge replaces equivalent but different
FreeBSD code detecting non-rotating medium vdevs.
MFC after: 1 month
Before sequential scrub patches ZFS never aggregated I/Os above 128KB.
Sequential scrub bumped that to 1MB, which motivation I understand for
spinning disks, since it should reduce number of head seeks. But for
SSDs it makes much less sense to me, especially on FreeBSD, where due
to MAXPHYS limitation device will likely still see bunch of 128KB I/Os
instead of one large. Having more strict aggregation limit allows to
avoid allocation of large memory buffer and memcpy to/from it, that is
a serious problem when bandwidth reaches few GB/s.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Update the bounds checking for zfs_vdev_aggregation_limit so that
it has a floor of zero and a maximum value of the supported block
size for the pool.
Additionally add an early return when zfs_vdev_aggregation_limit
equals zero to disable aggregation. For very fast solid state or
memory devices it may be more expensive to perform the aggregation
than to issue the IO immediately.
Author: Brian Behlendorf <behlendorf1@llnl.gov>
zfsonlinux/zfs@a58df6f536
MFV/ZoL: Cap maximum aggregate IO size
Commit 8542ef8 allowed optional IOs to be aggregated beyond
the specified aggregation limit. Since the aggregation limit
was also used to enforce the maximum block size, setting
`zfs_vdev_aggregation_limit=16777216` could result in an
attempt to allocate an ABD larger than 16M.
Author: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6259Closes#6270zfsonlinux/zfs@2d678f779a
r343295 broke DIOCGETSRCNODES by failing to reset 'nr' after counting the
number of source tracking nodes.
This meant that we never copied the information to userspace, leading to '? ->
?' output from pfctl.
PR: 236368
MFC after: 1 week
mlx4_en_stop_port() calls mlx4_en_put_qp() which can refer the link level
address of the network interface, which in turn will be freed by the
network interface detach function. Make sure the port is stopped
before detaching the network interface.
MFC after: 1 week
Sponsored by: Mellanox Technologies
It can happen during shutdown that the lock will recurse when the mlx4en(4)
instance is part of a lagg interface. Call ether_ifdetach() unlocked.
Backtrace:
panic(): _sx_xlock_hard: recursed on non-recursive sx &mdev->state_lock
_sx_xlock_hard()
_sx_xlock()
mlx4_en_ioctl()
if_setlladdr()
lagg_port_destroy()
lagg_port_ifdetach()
if_detach()
mlx4_en_destroy_netdev()
mlx4_en_remove()
mlx4_remove_device()
mlx4_unregister_device()
mlx4_unload_one()
mlx4_shutdown()
linux_pci_shutdown()
bus_generic_shutdown()
MFC after: 1 week
Sponsored by: Mellanox Technologies
The check for early exit should be checking the SLB entry itself. As
currently written it was checking the address of the SLB, which is always
non-zero, so would go through the kernel SR restore loop regardless.
Submitted by: mmacy
MFC after: 2 weeks
The second statements on the lines are not guarded by the `if' condition.
This triggers a warning with newer gcc. It's relatively harmless given the
usage, but incorrect. Instead, wrap the statements so they're properly
guarded.
Reported by: powerpc64-gcc xtoolchain
MFC after: 1 week
Chacha20 with a 256 bit key and 128 bit counter size is a good match for an
AES256-ICM replacement.
In userspace, Chacha20 is typically marginally slower than AES-ICM on
machines with AESNI intrinsics, but typically much faster than AES on
machines without special intrinsics. ChaCha20 does well on typical modern
architectures with SIMD instructions, which includes most types of machines
FreeBSD runs on.
In the kernel, we can't (or don't) make use of AESNI intrinsics for
random(4) anyway. So even on amd64, using Chacha provides a modest
performance improvement in random device throughput today.
This change makes the stream cipher used by random(4) configurable at boot
time with the 'kern.random.use_chacha20_cipher' tunable.
Very rough, non-scientific measurements at the /dev/random device, on a
GENERIC-NODEBUG amd64 VM with 'pv', show a factor of 2.2x higher throughput
for Chacha20 over the existing AES-ICM mode.
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Differential Revision: https://reviews.freebsd.org/D19475
When we roam between networks and our link-state goes down, automatically remove
the IPv6-Only flag from the interface. Otherwise we might switch from an
IPv6-only to and IPv4-only network and the flag would stay and we would prevent
IPv4 from working.
While the actual function call to clear the flag is under EXPERIMENTAL,
the eventhandler is not as we might want to re-use it for other
functionality on link-down event (such was re-calculate default routers
for example if there is more than one).
Reviewed by: hrs
Differential Revision: https://reviews.freebsd.org/D19487
I just found that at least on Skylake CPUs cpu_ticks() never returns odd
values, only even, and possibly has even bigger step (176/2?), that makes
its lower bits very bad entropy source, leaving half of taskqueues unused.
Switch to sbinuptime(), closer to upstreams, mitigates the problem by the
rate conversion working as kind of hash function. In case that is somehow
not enough (timer rate is too low or too divisible) mix in curcpu.
MFC after: 1 week
dyn_install_state() uses `rule` pointer when it creates state.
For O_LIMIT states this pointer actually is not struct ip_fw,
it is pointer to O_LIMIT_PARENT state, that keeps actual pointer
to ip_fw parent rule. Thus we need to cache rule id and number
before calling dyn_get_parent_state(), so we can use them later
when the `rule` pointer is overrided.
PR: 236292
MFC after: 3 days
On GENERIC kernels with empty loader.conf, there is no functional change.
DFLTPHYS and MAXBSIZE are both 64kB at the moment. This change allows
larger bufcache block sizes to be used when either MAXBSIZE (custom kernel)
or the loader.conf tunable vfs.maxbcachebuf (GENERIC) is adjusted higher
than the default.
Suggested by: ken@
All changes are hidden behind the EXPERIMENTAL option and are not compiled
in by default.
Add ND6_IFF_IPV6_ONLY_MANUAL to be able to set the interface into no-IPv4-mode
manually without router advertisement options. This will allow developers to
test software for the appropriate behaviour even on dual-stack networks or
IPv6-Only networks without the option being set in RA messages.
Update ifconfig to allow setting and displaying the flag.
Update the checks for the filters to check for either the automatic or the manual
flag to be set. Add REVARP to the list of filtered IPv4-related protocols and add
an input filter similar to the output filter.
Add a check, when receiving the IPv6-Only RA flag to see if the receiving
interface has any IPv4 configured. If it does, ignore the IPv6-Only flag.
Add a per-VNET global sysctl, which is on by default, to not process the automatic
RA IPv6-Only flag. This way an administrator (if this is compiled in) has control
over the behaviour in case the node still relies on IPv4.
When open(2) was invoked against a FUSE filesystem with an unexpected flags
value (no O_RDONLY / O_RDWR / O_WRONLY), an assertion fired, causing panic.
For now, prevent the panic by rejecting such VOP_OPENs with EINVAL.
This is not considered the correct long term fix, but does prevent an
unprivileged denial-of-service.
PR: 236329
Reported by: asomers
Reviewed by: asomers
Sponsored by: Dell EMC Isilon
* The ani function bitmap was being badly used when determining if a command
could be used. In hostap modes only a couple of the ANI control parameters
are enabled.
* The ani function bitmap was not being reset to HAL_ANI_ALL if transitioning
from AP -> STA.
* Change mrcCckOff to mrcCck - 1 == on, rather than 1 == off. This matches
the API used to set the value from userland via the diagnostic API.
* Handle OFDM/CCK noise immunity level commands in ar9300_ani_control().
These will only come from userland and it will go and program the rest of
the ANI control parameters with the values in the ANI table.
* Ensure all of the ANI parameters can be tweaked at runtime, even if they're
disabled.
Tested:
* carambola2 (AR9331), STA/AP modes
This mirrors the arm64 implementation and is for use in the minidump
code.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Differential Revision: https://reviews.freebsd.org/D18321
Note that only entries wired by userspace are shown as such. In
particular, entries transiently wired by sysctl_wire_old_buffer() are
not flagged as wired in procstat -v output.
Reviewed by: kib (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19461
