Currently this is a no-op, but will matter in the future when
cannot_use_txpkts() starts checking other conditions than just
needs_tso().
Sponsored by: Chelsio Communications
- Add a bus_child_location_str method to the nexus drivers that prints
out 'port=N' as the location string exported via devinfo and the
'%location' sysctl node.
- We can't use a bus_hint_device_unit to wire the unit numbers of
devices with a fixed devclass as the device gets assigned a unit in
make_device() before the device creator can set softc, etc.
Instead, when adding a child device, use a helper function much like
a bus_hint_device_unit method to look for wiring hints or to return
-1 to let the system choose a unit number. This function requires
an "at" hint for the port pointing to the nexus device and a "port"
hint listing the port number. For example:
hint.cxl.4.at="t5nex0"
hint.cxl.4.port="0"
wires cxl4 to the first port on the t5nex0 adapter.
Requested by: gallatin
MFC after: 2 months
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
Curiously, the in-kernel routines always use the design voltage to
convert from mA to mW, but acpiconf in userland uses the current
voltage. As a result, this can report a different mW rate than
acpiconf.
Submitted by: Manuel Stühn <freebsdnewbie@freenet.de>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17077
This allow to prevent deadlock on entering KDB if one of evdev locks is
already taken by userspace process.
Also this change discards all but LED console events produced by KDB as
unrelated to userspace.
Tested by: dumbbell (as part of D15070)
Objected by: bde (as 'KDB lock an already locked mutex' problem solution)
MFC after: 1 month
Now evdev part of keyboard drivers does not take any locks if corresponding
input/eventN device node is not opened by userland consumers.
Do not assert console lock inside evdev to handle the cases when keyboard
driver is called from some special single-threaded context like shutdown
thread.
r287023 and r334450 added build option mechanisms to permanently disable
spammy and/or low quality entropy sources.
Follow-up those changes by updating the 'enabled' sources mask to match.
When sources are compile-time disabled, represent them as disabled in the
source mask, and prevent users from modifying that, like pure sources.
(Modifying the mask bit would have no effect, but users might think it did
if it was not prevented.)
Mostly a cosmetic change.
Reviewed by: markm
Approved by: secteam (gordon)
X-MFC-With: 334450
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17252
Set debug.fail_point.random_fortuna_pre_read=return(1) and
debug.fail_point.random_fortuna_seeded=return(1) to return to unseeded
status (sort of). See the Differential URL for more detail.
The goal is to reproduce e.g. Lev's recent CURRENT report[1] about failing
newfs arc4random(3) usage (fixed in r338542).
No functional change when failpoints are not set.
[1]: https://lists.freebsd.org/pipermail/freebsd-current/2018-September/071067.html
Reported by: lev
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17047
'i' counts the number of pools included in the array 's'. Passing 'i+1' to
reseed_internal() as the number of blocks in 's' is a bogus overrun of the
initialized portion of 's' -- technically UB.
I found this via code inspection, referencing §9.5.2 "Pools" of the Fortuna
chapter, but I would expect Coverity to notice the same issue.
Unfortunately, it doesn't appear to.
Reviewed by: markm
Approved by: secteam (gordon)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16985
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
At least one NVMe drive has a bug that makeing the Command Time Out
PCIe feature unreliable. The workaround is to disable this
feature. The driver wouldn't deal correctly with a timeout anyway.
Only do this for drives that are known bad.
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D17708
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
interface into two groups. Filters can be used to match traffic
and distribute it across a group.
hw.cxgbe.nm_split_rss
Sponsored by: Chelsio Communications
The AML is even stupider than always returning 0. It will only return
non-zero for an OS that reports itself as "Windows 2015", at least
on the Threadripper board's AML that I've examined.
Those AMLs also suggest we may need this quirk for AMI0030 as well.
There may be other cases where we need to override the _STA in a
generic way, so we should consider writing code to do that.
subset of a VI's RSS indirection table.
This makes it possible to make groups out of rx queues and steer
different kinds of traffic to different groups. For example, an
interface with 8 rx queues could have all non-TCP traffic delivered to
queues 0-3 and all TCP traffic to queues 4-7.
Note that it is already possible for filters to steer traffic to a
particular queue or to distribute it using the full indirection table
(much like normal rx does).
Sponsored by: Chelsio Communications
The current deprecated list is: ae, bm, cs, de, dme, ed, ep, ex, fe,
pcn, sf, sn, tl, tx, txp, vx, wb, xe
The list as refined as part of FCP-0101. Per the FCP, devices may be
removed from the deprecation list if enough users are found or they are
converted to iflib.
FCP: https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Changelist:
- Move large parts of VALE code to a new file and header netmap_bdg.[ch].
This is useful to reuse the code within upcoming projects.
- Improvements and bug fixes to pipes and monitors.
- Introduce nm_os_onattach(), nm_os_onenter() and nm_os_onexit() to
handle differences between FreeBSD and Linux.
- Introduce some new helper functions to handle more host rings and fake
rings (netmap_all_rings(), netmap_real_rings(), ...)
- Added new sysctl to enable/disable hw checksum in emulated netmap mode.
- nm_inject: add support for NS_MOREFRAG
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17364
The BMan softc must exist when dtsec devices are created, else a NULL
pointer is dereferenced. QMan likely as well. Until now, we have relied on
order within the fdt parsing to attach correctly, but this obviously is not
foolproof. Mark these as BUS_PASS_SUPPORTDEV so they're probed and attached
explicitly before dtsec devices.
The bits that explicitly request cidx updates do not work reliably with
all possible WRs that can be sent over the queue. The F_FW_WR_EQUIQ
requests that still remain may also have to be replaced with explicit
credit flush WRs in the future.
MFC after: 2 days
Sponsored by: Chelsio Communications
The change is based on public documents listed below as well as Linux
changes and the code developed by Kostik.
The documents:
- Intel® C620 Series Chipset Platform Controller Hub Datasheet
- Intel® 100 Series and Intel® C230 Series Chipset Family Platform
Controller Hub (PCH) Datasheet - Volume 2 of 2
Interesting Linux commits:
- 9424693035
- 2a7a0e9bf7
The peculiarity of the new chipsets is that the watchdog resources are
configured in PCI registers of SMBus controller and Power Management
function as opposed to the LPC bridge. I took a simplistic approach of
querying the resources from the respective PCI devices. ichwd is still
a device on isa bus. The PCI devices are found by their slot and
function defined in the datasheets as siblings of the upstream LPC
bridge.
There are some shortcuts and missing features.
First of all, I have not implemented the functionality required to clear
the no-reboot bit. That would require writing to a special PCI
configuration register of a hidden / invisible PCI device after which
the device would start responding to accesses to other registers. The
no-reboot bit was not set on my test hardware, so I decided to leave its
handling for the later time.
Also, I did not try to handle the case where the watchdog resources are
not configured by the hardware as well as the case where ACPI defined
operational region conflicts with the watchdog resources. My test
system did not have either of those problem, so, again, I decided to
leave those cases until later.
See this Linux commit for some details of the ACPI problem:
a7ae81952c
Finally, I have added only the PCI ID found on my test system. I think
that more IDs can be added as the change gets tested.
Tested on Dell PowerEdge R740.
PR: 222079
Reviewed by: mav, kib
MFC after: 3 weeks
Relnotes: maybe
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D17585
the current fixed values, which enables use of rates above 1 Mbps.
Improved the detection of HXD chips, and the status flag handling as
well.
Submitted by: Gabor Simon <gabor.simon75@gmail.com>
PR: 225932
Differential revision: https://reviews.freebsd.org/D16639
MFC after: 1 week
Sponsored by: Mellanox Technologies
If power exceed the slot limit, or slot limit is unknown the ConnectX-6
firmware will shutdown its port.
Inform the user via debug message.
MFC after: 3 days
Approved by: hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
The Device Specific Method (_DSM) is on optional object that defines
device specific controls. This will be useful for our power management
controller in upcoming patches. More information can be found in ACPI
spec 6.2 section 9.1.1
https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
This patch had a minor modification changing ENOMEM to AE_NO_MEMORY
after it got review and approval but before committing.
Test Plan: Tested in my s0ix branch
Reviewed by: kib
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D17121
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
