bootloaders such as u-boot might enable regulators, or simply regulators could
be enabled by default by the PMIC, even if we don't have a driver for
the device or subsystem.
Disable unused regulators just before going to userland.
A tunable hw.regulator.disable_unused is added to not disable them in case
this causes problems on some board but the default behavior is to disable
everything unused.
I prefer to break thinks now and fix them rather than never switch to the
case were we disable regulators.
Tested on : Pine64-LTS (an idle board goes from ~0.33A to ~0.27A)
Tested on : BananaPi M2
Differential Revision: https://reviews.freebsd.org/D14781
Invalid font data passed to PIO_VFONT can result in an integer overflow
in glyphsize. Characters may then be drawn on the console using glyph
map entries that point beyond the end of allocated glyph memory,
resulting in a kernel memory disclosure.
Submitted by: emaste
Reported by: Dr. Silvio Cesare of InfoSect
Security: CVE-2018-6917
Security: FreeBSD-SA-18:04.vt
Sponsored by: The FreeBSD Foundation
Two modules with the same name cannot be loaded, so Marvell specific drivers
cannot have the same name as the generic drivers.
Files with the same name, even in different folders overlaps their .o files,
so in order to prepare for supporting Marvell platforms in GENERIC armv7
config, modify conflicting names.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14743
The TCB is read using a memory window right now. A better alternate to
get self-consistent, uncached information would be to use a GET_TCB
request but waiting for a reply from hw while holding non-sleepable
locks is quite inconvenient.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14817
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The common pratice in ethernet device drivers is to fall back to
ether_ioctl() to implement generic ioctls not implemented by the driver
and to fail if no handler exists.
Convert these drivers to follow that practice rather than calling
ether_ioctl() for specific cases.
vxge(4) aready had the default case, but it was only called on failure
to match.
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14895
Make sure the command completion handler is not called when the device is
in internal error state. This can easily trigger use after free situations.
MFC after: 3 days
Sponsored by: Mellanox Technologies
During health care IRQ resources will be reallocated.
Newbus requires that Giant is locked before accessing
these resources.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Firmware dump collecting should be triggered in case firmware syndrome
with request for reset bit is set.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
- Move the semaphore locking and unlocking to the same function.
- Flags are no longer needed if the reset and crdump will be done in the
same function.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
- Move firmware dump prep and cleanup to init_one() and remove_one() so that
the init and cleanup will happen only upon driver reload.
- Add some prints to indicate firmware dump.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
The old code checked for MLX5_CR_SPACE_DOMAIN which is irrelevant here.
However, if dev->vsec_addr would be 0, an access to wrong offset would
happen.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
These objects are defined earlier in the same file; an extern declaration
after definition is redundant.
Broken in r331766 (introduction of ocs_fc(4)).
Sponsored by: Dell EMC Isilon
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
When de(4) was imported in 1997 the world was not ready for these ioctls.
In over 20 years that hasn't changed so it seems safe to assume their
time will never come.
Reviewed by: imp, jhb
Approved by: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14889
A series of zero delay callouts can happen causing high CPU usage of the
timer subsystem when trying to repeat keys, because the time of the
absolute timeout is not moving forward. The condition clears when all
keys are released.
Reported by: Johannes Lundberg <johalun0@gmail.com>
Discussed with: bde@
PR: 226968
MFC after: 1 week
Sponsored by: Mellanox Technologies
Update to what the previous code seemed to be doing via the correct
interfaces. Further issues exist in xge_ioctl_registers(), but this is
debugging code in a driver that has few users and they don't appear to
be crashes or leaks.
Reviewed by: jhb (prior version)
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14848
No functional change in practice. If the sbni driver supported
64-bit big-endian system, this would be an ABI changes, but it is
i386-only. The old version leaked a word of stack on 64-bit systems.
This eliminates the only assignment to ifr_data.
Reviewed by: kib
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14874
No functional change in practice. If the sbni driver supported
64-bit big-endian system, this would be an ABI changes, but it is
i386-only. The old version leaked a word of stack on 64-bit systems.
This eliminates the only assignment to ifr_data.
Requests to modify the state of TLS connections need to be sent on the
same queue as TLS record transmit requests to ensure ordering.
However, in order to use the offload transmit queue in t4_set_tcb_field(),
the function needs to be updated to do proper flow control / credit
management when queueing a request to an offload queue. This required
passing a pointer to the toepcb itself to this function, so while here
remove the 'tid' and 'iqid' parameters and obtain those values from the
toepcb in t4_set_tcb_field() itself.
Submitted by: Harsh Jain @ Chelsio (original version)
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14871
It is random collection of fixes for issues not yet corrected,
reported at https://tsyrklevi.ch/clang_analyzer/freebsd_013017/. Many
issues from that list were already corrected. Most of them are for
compat32, old compat32 or affect both primary host ABI and compat32.
The freebsd32_kldstat(), for instance, was already fixed by using
malloc(M_ZERO). Patch includes correction to report the supplied
version back, which is just pedantic.
Reviewed by: brooks, emaste (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14868
This is more correct in that ioctl commands have no meaning until they
hit the handler associated with the file descriptor.
Add support for MDIOCRESIZE_32 which was missed when it was added.
Reviewed by: cem, kib, markj (various versions)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14714
Include _uio.h instead of uio.h in several headers to reduce header
polution.
Fix a few places that relied on header polution to get the uio.h header.
I have not moved struct uio as many more things that use it rely on
header polution to get other definitions from uio.h.
Reviewed by: cem, kib, markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14811
To fix the GCC build, remove multiple redundant declarations of
vmci_send_datagram() (the copy in vmci.h as well as the extern definition in
vmci_queue_pair.c were wholly redundant).
Also to fix the GCC build, include a non-empty format string in the vmci(4)
definition of ASSERT(). It seems harmless either way, but adding the
stringified invariant is easier than masking the warning.
The other vmci_kernel_defs.h changes are cosmetic and simply match macros to
existing definitions.
Reported by: GCC 6.4.0
Sponsored by: Dell EMC Isilon
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
controlled by the TCP_BLACKBOX option.
Enable this as part of amd64 GENERIC. For now, leave it disabled on
other platforms.
Sponsored by: Netflix, Inc.
This fixes an avoidable EINVAL when the user tries to disable AN after
the port is initialized but l1cfg doesn't have a valid speed to use.
MFC after: 1 week
Sponsored by: Chelsio Communications
error state.
If the device is in internal error state the hardware will not
generate completions. Just move on to destroy the resources.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Change page cleanup flow when in internal error to properly decrement
the page counts when reclaiming pages. That prevents timing out
waiting for extra pages that were actually cleaned up previously.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
When a PCI error is detected the PCI state could be corrupt, don't
save it in that flow. Save the state after initialization. After
restoring the PCI state during slot reset save it again, restoring
the state destroys the previously saved state info.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
