subclasses as are available with PCI. Changes I2C device drivers without
real probe logic to return BUS_PROBE_NOWILDWARD to avoid interference with
firmware bus enumeration, and reduces the probe priority of the iicbus
base driver to allow subclass attachment at higher priority.
Discussed on: freebsd-arch
Compilation of the AVILA kernel failed because of two reasons:
- It needed curthread, which is defined through <sys/pcpu.h>.
- It still referred the softc's sc_mtx field, which has been replaced by
sc_lock three weeks ago.
To solve the first problem, I decided to include <sys/pcpu.h> in
<sys/sx.h>, which also seems to be done by <sys/mutex.h> and
<sys/rwlock.h>. Those header files also require curthread.
Approved by: jhb
- Extend the DS1339 driver to recognize more chips in the family:
DS1337, DS1338, DS1339 are now supported
- Provide run-time chip detection
Reviewed, tested by: stas
Obtained from: Piotr Ziecik kosmo ! semihalf dot com
- ad7418(4) uses an sx lock instead of a mtx since the iicbus(4) stuff it
calls can sleep (request_bus()). Also, I expanded the locking slightly
to serialize writes to data stored in the softc.
- Similarly, the icee(4) driver now uses an sx lock instead of a mutex.
I also removed the pointless OPENED flag and flags field from the softc.
- The locking for the ic(4) driver was a bit trickier:
- Add a mutex to the softc to protect softc data.
- The driver uses malloc'd buffers that are the size of the interface
MTU to send and receive packets. Previously, these were allocated
every time the interface was brought up and anytime the MTU was
changed, with various races that could result in memory leaks. I
changed this to be a bit simpler and more like other NIC drivers in
that we allocate buffers during attach for the default MTU size and
only reallocate them on MTU changes. The reallocation procedure
goes to some lengths with various flags to not replace either the
the receive or transmit buffers while the driver is busy receiving
or transmitting a packet.
- Store the device_t of the driver in the softc instead of detours into
new-bus using if_dunit from the ifnet and an even more bizarre detour
to get the softc instead of using if_softc.
- Drop the driver mutex when invoking netisr_dispatch() to pass the
packet up to IP.
- Use if_printf().
- Add an sx lock to the iic(4) driver to serialize open(), close(), read(),
and write and to protect sc_addr and sc_count in the softc.
- Use cdev->si_drv1 instead of using the minor number of the cdev to
lookup the softc via newbus in iic(4).
- Store the device_t in the softc to avoid a similar detour via minor
numbers in iic(4).
- Only add at most one instance of iic(4) and iicsmb(4) to each iicbus(4)
instance, and do it in the child driver.
- Add a mutex to the iicbus(4) softc to synchronize the request/release bus
stuff.
- Use __BUS_ACCESSOR() for IICBUS_ACCESSOR() instead of rolling our own.
- Add a mutex to the iicsmb(4) softc to protect softc state updated in the
interrupt handler.
- Remove Giant from all the smbus methods in iicsmb(4) now that all the
iicbus(4) backend is locked.
- Just grab Giant in the ixp425_iic(4) driver since this driver uses
a shared address/data register window pair to access the actual
I2C registers. None of the other ixp425 drivers lock access to these
shared address/data registers yet and that would need to be done before
this could use any meaningful locking.
- Add locking to the interrupt handler and 'iicbus_reset' methods of the
at91_twi(4) driver.
- Add locking to the pcf(4) driver. Other pcf(4) fixes include:
- Don't needlessly zero the softc.
- Use bus_foo rather than bus_space_foo and remove bus space tag and
handle from softc.
- The lpbb(4) driver just grabs Giant for now. This will be refined later
when ppbus(4) is locked.
- As was done with smbus earlier, move the DRIVER_MODULE() lines to match
the bus driver (either iicbus or iicbb) to the bridge driver into the
bridge drivers.
Tested by: sam (arm/ixp425)
some devices (and not others). To get instances onto the iicbus, one
now needs hints or an identify routine. We also do not probe the bus
for devices because many iic devices cannot be safely probed (and when
they can, the probe order turns out to be somewhat difficult to get
right).
# I'm not 100% sure that the iicsmb removal is right. Please contact me if
# this causes difficulty.
Add a note that suggests a cleanup.
Note: This patch was derived based on looking at the pvrxxx/pvr250
ports' Makefiles only, and may be incomplete. It is not derived from
anything I saw from Hauppage.
- Change smbus_callback() to pass a void * rather than caddr_t.
- Change smbus_bread() to pass a pointer to the count and have it be an
in/out parameter. The input is the size of the buffer (same as before),
but on return it will contain the actual amount of data read back from
the bus. Note that this value may be larger than the input value. It
is up to the caller to treat this as an error if desired.
- Change the SMB_BREAD ioctl to write out the updated struct smbcmd which
will contain the actual number of bytes read in the 'count' field. To
preserve the previous ABI, the old ioctl value is mapped to SMB_OLD_BREAD
which doesn't copy the updated smbcmd back out to userland. I doubt anyone
actually used the old BREAD anyway as it was rediculous to do a bulk-read
but not tell the using program how much data was actually read.
- Make the smbus driver and devclass public in the smbus module and
push all the DRIVER_MODULE()'s for attaching the smbus driver to
various foosmb drivers out into the foosmb modules. This makes all
the foosmb logic centralized and allows new foosmb modules to be
self-contained w/o having to hack smbus.c everytime a new smbus driver
is added.
- Add a new SMB_EINVAL error bit and use it in place of EINVAL to return
an error for bad arguments (such as invalid counts for bread and bwrite).
- Map SMB bus error bits to EIO in smbus_error().
- Make the smbus driver call bus_generic_probe() and require child drivers
such as smb(4) to create device_t's via identify routines. Previously,
smbus just created one anonymous device during attach, and if you had
multiple drivers that could attach it was just random chance as to which
driver got to probe for the sole device_t first.
- Add a mutex to the smbus(4) softc and use it in place of dummy splhigh()
to protect the 'owner' field and perform necessary synchronization for
smbus_request_bus() and smbus_release_bus().
- Change the bread() and bwrite() methods of alpm(4), amdpm(4), and
viapm(4) to only perform a single transaction and not try to use a
loop of multiple transactions for a large request. The framing and
commands to use for a large transaction depend on the upper-layer
protocol (such as SSIF for IPMI over SMBus) from what I can tell, and the
smb(4) driver never allowed bulk read/writes of more than 32-bytes
anyway. The other smb drivers only performed single transactions.
- Fix buffer overflows in the bread() methods of ichsmb(4), alpm(4),
amdpm(4), amdsmb(4), intpm(4), and nfsmb(4).
- Use SMB_xxx errors in viapm(4).
- Destroy ichsmb(4)'s mutex after bus_generic_detach() to avoid problems
from child devices making smb upcalls that would use the mutex during
their detach methods.
MFC after: 1 week
Reviewed by: jmg (mostly)
forcing all transfers to do the start read/write stop by hand. Some
smart bridges prefer this sort of operation, and this allows us to
support their features more easily. When bridges don't support it, we
fall back to using the old-style opertaions. Expand the ioctl
interface to expose this function. Unlike the old-style interface,
this interface is thread safe, even on old bridges.
as pcf_ebus and pcf_isa, they should probably be fixed back to pcf),
and bti2c doesn't exist, bktr has smbus or iicbb as children..
Brought to you by: http://people.FreeBSD.org/~jmg/driver.pdf
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
a DLT_NULL interface. In particular:
1) Consistently use type u_int32_t for the header of a
DLT_NULL device - it continues to represent the address
family as always.
2) In the DLT_NULL case get bpf_movein to store the u_int32_t
in a sockaddr rather than in the mbuf, to be consistent
with all the DLT types.
3) Consequently fix a bug in bpf_movein/bpfwrite which
only permitted packets up to 4 bytes less than the MTU
to be written.
4) Fix all DLT_NULL devices to have the code required to
allow writing to their bpf devices.
5) Move the code to allow writing to if_lo from if_simloop
to looutput, because it only applies to DLT_NULL devices
but was being applied to other devices that use if_simloop
possibly incorrectly.
PR: 82157
Submitted by: Matthew Luckie <mjl@luckie.org.nz>
Approved by: re (scottl)
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
NULL name in device_add_child(), explicitly name all of our known
child drivers in order to give them a chance to attach to us.
Otherwise, only the first one present would be probed and attached.
Reviewed by: nsouch
MFC after: 1 month
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.