4023 Commits

Author SHA1 Message Date
jmcneill
793c81bb5c On command error, reset only DMA and FIFO engines instead of the entire
controller. Fixes eMMC device detection on OrangePi Plus 2e (and likely
others).
2016-11-15 23:48:30 +00:00
jmcneill
33c65a344c Allow the MMC frequency to be set up to 52MHz for MMC high speed timings. 2016-11-15 23:46:01 +00:00
loos
5f3bff0594 After r308533, the platform compatible string must be an exact match.
Use "ti,am33xx" instead of "ti,am335x", which gives an exact match in every
DTS we support.

This fixes the boot on TI SoCs after r308533.

Suggested by:	gonzo
Sponsored by:	Rubicon Communications, LLC (Netgate)
2016-11-15 21:18:55 +00:00
loos
36a9f10563 Change the TI aintc driver name to "ti_aintc" to avoid the conflict with
the aintc driver for Allwinner A10.

This fixes the boot of the GENERIC ARM kernel on TI/AM335x SoCs.

Sponsored by:	Rubicon Communications, LLC (Netgate)
2016-11-15 19:09:36 +00:00
loos
0253e5f064 Fix ti_gpio_detach() to avoid crashing if something goes wrong.
Sponsored by:	Rubicon Communication, LLC (Netgate)
2016-11-15 18:57:25 +00:00
manu
0dcd80439e Upstream DTS provides PLL3 and PLL7 nodes (and their x2 form),
so remove them from our DTS and adapt the code to handle them correctly.
This fix HDMI video on A20.
2016-11-15 07:08:33 +00:00
loos
4f878bbc47 Add the cpsw, the NIC driver for ti/am335x, to GENERIC kernel.
While here:

 - remove 'device mii' - included by miibus;
 - remove 'device smcphy' - included by miibus;
 - sorted the network drivers list;
 - added a comment about miibus based on amd64/GENERIC.

Sponsored by:	Rubicon Communications, LLC (Netgate)
2016-11-14 20:57:30 +00:00
loos
9ee5d747bb Build the Ti/AM335x DTBs as part of GENERIC kernel.
Sponsored by:	Rubicon Communications, LLC (Netgate)
2016-11-14 19:53:46 +00:00
andrew
70755d9fd5 Use the correct OF_getencprop over OF_getprop + fdt32_to_cpu to read
integer data from the device tree.

Sponsored by:	ABT Systems Ltd
2016-11-14 12:03:08 +00:00
andrew
7e58b01f10 Move including fdt_pinctrl.h after openfirm.h to get th edefinition of
phandle_t and remove the need for including fdt_common.h.

Sponsored by:	ABT Systems Ltd
2016-11-14 11:52:22 +00:00
andrew
99881c494f Stop including fdt_common.h from the arm code when it's unneeded.
Sponsored by:	ABT Systems Ltd
2016-11-14 11:41:22 +00:00
skra
dd670c9738 The return type of is_managed() was changed from boolean_t to bool type
in r308569. Now, propagate this change further for consistency sake.

MFC after:	2 weeks
2016-11-12 17:24:41 +00:00
skra
d1e84c59ba Always call PHYS_TO_VM_PAGE() in is_managed(). Fast road for addresses
under first_page cannot be taken as this variable is connected only to
vm_page_array segment. There could be more segments in system like
the ones for various fictitious page ranges. These can be situated
under vm_page_array segment and so, they could be skipped before this
fix. However, as far as I know, there is no report associated with it.

While here, the return type of this function is changed from boolean_t
to bool type.

Reviewed by:	kib
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D8502
2016-11-12 17:03:21 +00:00
andrew
7168ae84d8 Use the modern spelling of ofw_bus_node_is_compatible in sys/arm.
Sponsored by:	ABT Systems Ltd
2016-11-11 15:13:30 +00:00
andrew
9680845cca Fix ata_at91_alloc_resource to use rman_res_t.
Sponsored by:	ABT Systems Ltd
2016-11-11 14:30:09 +00:00
andrew
68ba24436b Remove more unneeded users of the fdt_pic_decode_t table.
Sponsored by:	ABT Systems Ltd
2016-11-11 14:22:35 +00:00
bdrewery
30f99dbeef Fix improper use of "its".
Sponsored by:	Dell EMC Isilon
2016-11-08 23:59:41 +00:00
andrew
6b299102ab Start to remove the old pre-INTRNG code from the arm platforms. These have
all moved to use INTRNG.

Reviewed by:	manu, mmel
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D8469
2016-11-08 12:15:57 +00:00
manu
bf9328d796 Do not fail to attach the clock if we cannot set the assigned parents as this
property isn't mandatory.

MFC after:	2 weeks
2016-11-08 10:06:43 +00:00
gonzo
9f361d37fe Fix locking in bcm2835_audio driver
- Move all VCHI activity to worker thread: channel methods are called with
    non-sleepable lock held and VCHI uses sleepable lock.

- In worker thread use sx(9) lock instead of mutex(9) for the same reason.

PR:		213801, 205979
2016-11-07 17:38:39 +00:00
andrew
6d90ee5203 Fix the order of includes so machine/asm.h is first.
MFC after:	1 week
Sponsored by:	ABT Systems Ltd
2016-11-07 11:56:18 +00:00
sgalabov
467812cdaf Generate an error if machine/armreg.h is included without sys/cdefs.h
machine/armreg.h requires access to the __ARM_ARCH macro, which is not
always properly defined (especially by gcc 4.2.1). We should include
sys/cdefs.h in order to get the definitions in machine/acle-compat.h,
which would properly define the __ARM_ARCH macro in these cases.

So, in cases where machine/armreg.h is included without _SYS_CDEFS_H_
being defined - generate an #error.

Reviewed by:	andrew
Sponsored by:	Smartcom - Bulgaria AD
Differential Revision:	https://reviews.freebsd.org/D8460
2016-11-07 11:35:14 +00:00
andrew
e4dff2815a Include machine/armreg.h after machine/asm.h to ensure __ARM_ARCH is
defined.

MFC after:	1 week
Sponsored by:	ABT Systems Ltd
2016-11-07 11:01:09 +00:00
sgalabov
c51e63ac4e Only include sys/boot.h if LINUX_BOOT_ABI is defined
Only include sys/boot.h if LINUX_BOOT_ABI is defined in
sys/arm/arm/machdep.c

Not doing this prevents kernels that do not define LINUX_BOOT_ABI from
being build with gcc (at least 4.2.1).

Reviewed by:	mmel
Sponsored by:	Smartcom - Bulgaria AD
Differential Revision:	https://reviews.freebsd.org/D8459
2016-11-07 10:54:56 +00:00
andrew
a2f93eb4e5 Start to deorbit the kernel configs in GENERIC by marking them with
NO_UNIVERSE. This stops them from being built with the universe,
tinderbox, and related targets.

Sponsored by:	ABT Systems Ltd
2016-11-07 10:26:44 +00:00
mmel
5b129f8322 Add NVIDIA Tegra XHCI driver and coresponding firmware blob.
MFC after: 3 weeks
Approved by: core@ (NVIDIA license)
2016-11-07 05:37:10 +00:00
mmel
5a9d50ef06 Rework NVIDIA Tegra124 XUSBPAD driver.
- Adapt it for new, incompatible, DT bindings introduced by r306197.
 - Add support for USB super speed pads/ports.

MFC after: 3 weeks
2016-11-07 05:34:44 +00:00
manu
9d3514c51b Add support for AXP221 Power Management Unit.
AXP221 is used on board with A31/A31S and is mostly compatible with AXP209.
Regulators, GPIO and Sensors are supported.

MFC after:	2 weeks
2016-11-04 20:02:52 +00:00
manu
f250b31b8f Fix r308306 by spelling variable correctly. 2016-11-04 19:23:52 +00:00
manu
bbe2cf06a3 Set rst_apb to NULL to avoid panic when release. 2016-11-04 19:21:11 +00:00
manu
6752551596 For AHB clock we need to set the assigned parents for cpufreq(4) to work.
MFC after:	2 weeks
2016-11-04 17:13:47 +00:00
mmel
a2ffe4f474 TEGRA: Fix numerous issues in clock code.
Define and export clocks related to XUSB driver.
2016-11-04 11:40:11 +00:00
mmel
8a632335a6 TEGRA: Add basic driver for memory controller.
For now, it only reports memory and SMMU access errors.
2016-11-04 11:39:19 +00:00
manu
ad2e4c2a65 Add Allwinner UP SoC support to GENERIC on armv6
Relnotes:	yes
2016-11-04 04:47:08 +00:00
jmcneill
e18f600aa8 Add support for Allwinner H3 audio codec.
The audio controller in the H3 is more or less the same as A10/A20 except
some registers are shuffled around. The mixer interface, however, is
completely different between SoCs. Separate a10_mixer_class and
h3_mixer_class implementations are now made available. This will also make
adding support for other SoCs easier in the future.

Reviewed by:		andrew, ganbold
Relnotes:		yes
Differential Revision:	https://reviews.freebsd.org/D8425
2016-11-03 23:22:04 +00:00
jmcneill
ed8cd3d90b Add support for the integrated DMA controller found in the Allwinner A31,
A64, A83T, and H3 SoCs.

Relnotes:	yes
2016-11-02 23:58:10 +00:00
jmcneill
658db1e905 Register the device's xref handle at attach time. 2016-11-02 23:53:47 +00:00
jmcneill
6898377ae4 Add support for H3 PLL2 (PLL_Audio). 2016-11-02 23:49:57 +00:00
jmcneill
82a586b8cb The DTS may report fewer than 4 parents for a module clock. Avoid setting
the module clock parent to an out-of-range index in these cases.
2016-11-02 23:46:23 +00:00
andrew
fc804aaea6 Add BeagleBone Black support to GENERIC on armv6.
Reviewed by:	mmel, imp
Relnotes:	yes
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D8335
2016-11-02 13:11:19 +00:00
andrew
00a1afd4d0 Allow an SMP kernel to boot on Cortex-A8:
* Rename ARM_HAVE_MP_EXTENSIONS to ARM_USE_MP_EXTENSIONS and extend it to
   handle more cases, including when SMP is not enabled.
 * Check ARM_USE_MP_EXTENSIONS when building for ARMv7+, even if no SMP.
 * Use ARM_USE_MP_EXTENSIONS in pmap-v6.c to detect when to set PRRR_NS1.

With this we should be able to boot on all ARMv7+ Cortex-A cores with
32-bit support.

Reviewed by:	mmel, imp (earlier version)
Relnotes:	yes
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D8335
2016-11-02 13:10:08 +00:00
jhibbits
e9d76762b9 Move imx_sdhci driver over to a dev/sdhci in preparation for QorIQ support.
Freescale uses eSDHC in both i.MX (ARM) and QorIQ (PowerPC), with slight
differences.  This is part one in unifying the drivers.

Reviewed by:	imp
2016-11-02 00:51:09 +00:00
jmcneill
2243143c05 Fix H3 temperature reporting. The formula in for V1.0 of the H3 datasheet
seems to be incorrect, so use the same method of conversion as the H3 BSP
instead.
2016-10-30 14:39:33 +00:00
ganbold
84ca5cfc2b Add support for Allwinner Consumer IR interface.
RX is supported now and the driver is using evdev framework.
It was tested on Cubieboard2 (A20 SoC) using lirc
with dfrobot's IR remote controller.
2016-10-27 04:26:33 +00:00
andrew
bcf99b937b Use the new fdt_intr.h constants in the Allwinner NMI driver.
Sponsored by:	DARPA, AFRL
2016-10-26 16:03:26 +00:00
andrew
bbef42a78d Pull the common FDT interrupt values into a new header rather than be magic
numbers.

Sponsored by:	DARPA, AFRL
2016-10-26 15:18:08 +00:00
andrew
6b5436f0fc Define the Allwinner PLL FDT constants in the file that uses them rather
than including a file from under sys/gnu.

Sponsored by:	DARPA, AFRL
2016-10-26 14:09:30 +00:00
manu
7cc4d6d945 The only consumer of pll1 is the CPU clock, we don't need to set it glitch free.
Reported by:	jmcneill
MFC after:	1 week
2016-10-26 08:47:35 +00:00
andrew
adfae7408b Add MULTIDELAY support to the am335x dmtimer. This will be useful for
testing Cortex-A8 support in GENERIC.

Sponsored by:	ABT Systems Ltd
2016-10-25 18:01:19 +00:00
andrew
7ddcf90c03 Remove the need for the delay to be zero when MULTIDELAY is undefined,
it may be useful to only enable this in some configs.

Sponsored by:	ABT Systems Ltd
2016-10-25 17:57:31 +00:00