sfxge: do not use DEBUG_FLAGS to enable extra debug checks
DEBUG_FLAGS are set to DEBUG option value when kernel is built.
For example, it is -g in GENERIC config to have debug symbols.
Also DEBUG_FLAGS are used to determine if ctfconvert should keep
debug symbols.
Since we redefined DEBUG_FLAGS, debug symbols were always missing.
ctfconvert complains about it during kernel build.
It is incorrect to append DEBUG_FLAGS, since if DEBUG has no -g (or
similar), we'll have no debug symbols and ctfconvert will complain.
If it incorrect to always have -g in our DEBUG_FLAGS, since debug
symbols presence should be controllable by kernel config.
So, just add disabled by default addition of -DDEBUG=1 to CFLAGS.
Reviewed by: imp
Sponsored by: Solarflare Communications, Inc.
sfxge: add 7xxx NICs family support
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
It is required to cope with u_long limit for 10 Gbps in a right way.
It is a direct commit to stable/10 since head differs (head does not
have if_initbaudrate(), if_baudrate is simply uint64_t).
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2849
Implement multiqueue (max 2 tx/rx queues) for the 82574L chipset.
Change default tuning parameters to handle this new configuration if
EM_MULTIQUEUE is set in the kernel configuration. Off by default.
See r283959 changelog for the scope of these changes.
Relnotes: Yes
Sponsored by: Limelight Networks
Disable VGA PCI interrupts until a chipset driver is loaded for VGA
PCI devices. Else unhandled display adapter interrupts might freeze
the CPU or consume a lot of CPU.
PR: 156596
Extend fixes made in r278103 and r38754 by copying the complete packet
header and not only partial flags and fields. Firewalls can attach
classification tags to the outgoing mbufs which should be copied to
all the new fragments. Else only the first fragment will be let
through by the firewall. This can easily be tested by sending a large
ping packet through a firewall. It was also discovered that VLAN
related flags and fields should be copied for packets traversing
through VLANs. This is all handled by "m_dup_pkthdr()".
Regarding the MAC policy check in ip_fragment(), the tag provided by
the originating mbuf is copied instead of using the default one
provided by m_gethdr().
Tested by: Karim Fodil-Lemelin <fodillemlinkarim at gmail.com>
Sponsored by: Mellanox Technologies
PR: 7802
Update this driver to not save copies of registers that are no longer
used after r281874. While here, also update it to always write the
parent's PCI bus number to the primary bus register.
Simplify hang detection by stealing the techniques used in ixl(4) and
applying them to em(4).
Rely on iterations through the local timer, and the tx queue state to
determine if an actual hang has occurred. Any time a descriptor is used
(packet sent), the tx queue is flagged as busy. Then when txeof runs, it
either clears the flag when all is clean, or resets it to 1 if ANY are
cleaned, if nothing is cleaned it increments the flag.
Local timer simply checks to see if busy ever reaches MAX (10, which
is compile time configurable), and then sets it as HUNG, at that point
there is one more timer cycle in which to have any cleans, if not a
watchdog reset will occur.
In case of an output error, continue with the next net, don't try to
continue sending on the same net.
This fixes a bug where an invalid mbuf chain was constructed, if a
full size frame of control chunks should be sent and there is a
output error.
Based on a discussion with rrs@, change move to the next net. This fixes
the bug and improves the behaviour.
Thanks to Irene Ruengeler for spending a lot of time in narrowing this
problem down.
------------------------------------------------------------------------
r284192 | ken | 2015-06-09 15:39:38 -0600 (Tue, 09 Jun 2015) | 102 lines
Add support for reading MAM attributes to camcontrol(8) and libcam(3).
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.
This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.
libsbuf/Makefile:
Add subr_prf.c for the new sbuf_hexdump() function. This
function is essentially the same function.
libsbuf/Symbol.map:
Add a new shared library minor version, and include the
sbuf_hexdump() function.
libsbuf/Version.def:
Add version 1.4 of the libsbuf library.
libutil/hexdump.3:
Document sbuf_hexdump() alongside hexdump(3), since it is
essentially the same function.
camcontrol/Makefile:
Add attrib.c.
camcontrol/attrib.c:
Implementation of READ ATTRIBUTE support for camcontrol(8).
camcontrol/camcontrol.8:
Document the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.c:
Add the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.h:
Add a function prototype for scsiattrib().
share/man/man9/sbuf.9:
Document the existence of sbuf_hexdump() and point users to
the hexdump(3) man page for more details.
sys/cam/scsi/scsi_all.c:
Add a table of known attributes, text descriptions and
handler functions.
Add a new scsi_attrib_sbuf() function along with a number
of other related functions that help decode attributes.
scsi_attrib_ascii_sbuf() decodes ASCII format attributes.
scsi_attrib_int_sbuf() decodes binary format attributes, and
will pass them off to scsi_attrib_hexdump_sbuf() if they're
bigger than 8 bytes.
scsi_attrib_vendser_sbuf() decodes the vendor and drive
serial number attribute.
scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
Information attribute that LTFS writes out.
sys/cam/scsi/scsi_all.h:
Add a number of attribute-related structure definitions and
other defines.
Add function prototypes for all of the functions added in
scsi_all.c.
sys/kern/subr_prf.c:
Add a new function, sbuf_hexdump(). This is the same as
the existing hexdump(9) function, except that it puts the
result in an sbuf.
This also changes subr_prf.c so that it can be compiled in
userland for includsion in libsbuf.
We should work to change this so that the kernel hexdump
implementation is a wrapper around sbuf_hexdump() with a
statically allocated sbuf with a drain. That will require
a drain function that goes to the kernel printf() buffer
that can take a non-NUL terminated string as input.
That is because an sbuf isn't NUL-terminated until it is
finished, and we don't want to finish it while we're still
using it.
We should also work to consolidate the userland hexdump and
kernel hexdump implemenatations, which are currently
separate. This would also mean making applications that
currently link in libutil link in libsbuf.
sys/sys/sbuf.h:
Add the prototype for sbuf_hexdump(), and add another copy
of the hexdump flag values if they aren't already defined.
Ideally the flags should be defined in one place but the
implemenation makes it difficult to do properly. (See
above.)
Sponsored by: Spectra Logic Corporation
------------------------------------------------------------------------
Clear p_stops when doing PT_DETACH and PROCFS_CTL_DETACH.
Without this, if a process was being traced by truss(1), which
uses different p_stops bits than gdb(1), the latter would
misbehave because of the unexpected bits.
Reported by: jceel
Submitted by: sef
Sponsored by: iXsystems, Inc.
- Add vxlan interface
- Use the size of the Ethernet address, not the entire header, when
copying into forwarding entry.
- Prefix all the vxlan ifconfig commands so they are unique
Rework vtblk dump handling of in flight requests
Previously, the driver resets the device and abandon the requests that
are caught in flight when the dump was initiated. This was problematic
if the system is resumed after the dump is completed.
While that is probably not the typical action, it is simple to rework
the driver to very likely have the device usable after the dump without
making it more likely for the dump to fail. The in flight requests are
simply queued for completion once the dump is finished.
r282533 : Corrected indentation on conflicted source files.
r282532 : Configured the mrsas(4) driver to support UNMAPPED I/O and updated driver version.
r282531 :
1. All LSI namings are converted to AVAGO Tech.
2. Fix in AEN path(suggested by John Baldwin).
3. Fix IOCTL path w.r.t Sense key handling
r282530 :
Bug fixes found internally as detailed below:
1. While disabling interrupt the FW disables interrupts for only 16 vectors.
In case of Invader which supports 96 MSI-x vectors, some spurious interrupts
may come on other vectors even after interrupt disable. So, driver uses a flag
and ignores the spurious interrupts.
2. Reply queue depth is made double the number of commands supported by FW.
3. Misplaced interrupt enable code is now moved down in the OCR path.
4. Updated error handling code in OCR path.
5. Removed un-necessary print.
r282529 :
Driver calls mrsas_complete_cmd() to call mrsas_wakeup() for each MFI frame that was
issued through the ioctl() interface prior to the kill adapter. This ensures
userspace ioctl() system calls issued just before a kill adapter don't get stuck in
wait state and IOCTLs are returned to application.
r282528 :
In OCR(Online Controller Reset) path, driver sets adapter state to
MEGASAS_HBA_OPERATIONAL before getting new RAID map.
There will be a small window where IO will come from OS with old RAID map.
This patch will update adapter state to MEGASAS_HBA_OPERATIONAL,
only after driver has new RAID map to avoid any IOs getting build using old RAID map.
r282527 :
Current driver does fast path read load balancing between arm and mirror disk
for two Drive Raid-1 configuration only.
Now, Driver support fast path read load balancing for all (any number of disk) Raid-1 configuration.
r282526 :
Now Driver expose Secure Jbod Support via driver_operations in MFI INIT Frame.
FW expose Secure Jbod support via Controller properity.
Firmware expect IOs to be received from different IO path than
conventional fast path queue, in case of SED drives.
To have Secure jbod support user need driver and firmware support.
r282525 : This patch adds the feature to provide PCI information via IOCTL query.
Fix a callout race condition introduced in TCP timers callouts with r281599.
In TCP timer context, it is not enough to check callout_stop() return value
to decide if a callout is still running or not, previous callout_reset()
return values have also to be checked.
Make the size of the hash tables used by the NFSv4 server tunable.
No appreciable change in performance was observed after increasing
the sizes of these tables and then testing with a single client.
However, there was an email that indicated high CPU overheads for
a heavily loaded NFSv4 and it is hoped that increasing the sizes
of the hash tables via these tunables might help.
The tables remain the same size by default.
Prevent dounmount() from acting on the freed (although type-stable)
memory by changing the interface to require the mount point to be
referenced.
MFC r283629:
Add missed {}.
Perform SU cleanup in the AST handler. Do not sleep waiting for SU cleanup
while owning vnode lock.
On MFC, for KBI stability, td_su member was moved to the end of the
struct thread.
Properly null-terminate strings in a kernel dump header. A version string
longer than 192 bytes will cause the version field of a dump header to
overflow. strncpy doesn't null terminate it, so savecore will print a
corrupted info file. Using strlcpy fixes the bug.
Remove unneeded NULL checks in amd64's trap_fatal().
Since td_name is an array member of struct thread, it can never be NULL,
so the check can be removed. In addition, curproc can never be NULL,
so remove the if statement, and splice the two printfs() together.
While here, remove the u_long cast, and use the correct printf format
specifier curproc->p_pid.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D2695
The NFS client generated directory block(s) with d_fileno == 0
so that it would not return less data than requested.
Since returning less directory data than requested is not a problem
for FreeBSD and even UFS no longer returns directory structures
with d_fileno == 0, this patch stops the client from doing this.
Although entries with d_fileno == 0 should not be a problem,
the man pages no longer document that these entries should be
ignored, so there was a concern that these entries might be an
issue in the future.
Place VM objects on the object list when created and never remove them.
261811:
Fix function name in KASSERT().
282660:
Place VM objects on the object list when created and never remove them.
This is ok since objects come from a NOFREE zone and allows objects to
be locked while traversing the object list without triggering a LOR.
Ensure that objects on the list are marked DEAD while free or stillborn,
and that they have a refcount of zero. This required updating most of
the pagers to explicitly mark an object as dead when deallocating it.
(Only the vnode pager did this previously.)
282706:
Satisfy vm_object uma zone destructor requirements after r282660 when
vnode object creation raced.
Change struct attribute to avoid aligned operations mismatch
Previous __alignment(4) allowed compiler to assume that operations are
performed on aligned region. On ARM processor, this led to alignment fault
r259150:
Print out the full PCIe link negotiation during dmesg.
I found this useful when checking whether a NIC is in a PCIE 3.0 8x slot
or not.
r283864:
cxgbe: no need to display the per-lane GT/s rating of the pcie link.
Add a dtb module for AM335x systems (just Beaglebone right now).
Remove the static DTB config and instead build modules/dtb/am335x.
Also, remove WITHOUT_MODULES="ahc" which was added long ago to work
around build problems that have long since been fixed correctly.
Revert accidentally commited modules/Makefile file from r279824.
Create a module to install the Raspberry Pi dtb files.
Pull in the rpi.dts -> rpi.dtb module (dtb/rpi) and have it install
rpi.dtb in /boot/dtb by default.
Add a module to build the dtb files for all supported imx6 systems.
Remove imx6s-wandboard.dts, there is no such file.
r283858:
cxgbe: set minimum burst size when fetching freelist buffers to 128B.
r284007:
cxgbe: set the minimum burst size when fetching fl buffers to 128B for
netmap rx queues too. This should have gone in as part of r283858.
cxgbe/tom: return rx credits promptly if the socket buffer's low water
mark cannot be reached because the window advertised to the peer isn't
wide enough. While here, tweak the normal credit return too.
Pass MODULES_EXTRA to the modules build. While I'm here, also always
pass WITHOUT_MODULES down. There's no need to make this conditional.
Properly quote EXTRA_MODULES and WITHOUT_MODULES to ensure that they
are passed down properly when there's more than one.
Merge latest dts files (commit c8c1b3a77934768c7f7a4a9c10140c8bec529059)
from the git tree.
File names with commas in them cause issues for freebsd-update. We
don't actually use these files at the moment, so eliminate them until
we actually do. In the mean time, freebsd-update will be updated
to eliminate the issues.
The GNU Amlogic DTS files have some errors (e.g. bad register
address, bad IRQ, etc) which are fixed by this patch.
r278239:
cxgbe(4): reserve id for iSCSI upper layer driver.
r278374:
cxgbe(4): tidy up some of the interaction between the Upper Layer
Drivers (ULDs) and the base if_cxgbe driver.
Track the per-adapter activation of ULDs in a new "active_ulds" field.
This was done pretty arbitrarily before this change -- via TOM_INIT_DONE
in adapter->flags for TOM, and the (1 << MAX_NPORTS) bit in
adapter->offload_map for iWARP.
iWARP and hw-accelerated iSCSI rely on the TOE (supported by the TOM
ULD). The rules are:
a) If the iWARP and/or iSCSI ULDs are available when TOE is enabled then
iWARP and/or iSCSI are enabled too.
b) When the iWARP and iSCSI modules are loaded they go looking for
adapters with TOE enabled and enable themselves on that adapter.
c) You cannot deactivate or unload the TOM module from underneath iWARP
or iSCSI. Any such attempt will fail with EBUSY.
Add new socket ioctls SIOC[SG]TUNFIB to set FIB number of encapsulated
packets on tunnel interfaces. Add support of these ioctls to gre(4),
gif(4) and me(4) interfaces. For incoming packets M_SETFIB() should use
if_fib value from ifnet structure, use proper value in gre(4) and me(4).
Differential Revision: https://reviews.freebsd.org/D2462
Remove in_gif.h and in6_gif.h files. They only contain function
declarations used by gif(4). Instead declare these functions in C files.
Also make some variables static.
MFC r276215:
Extern declarations in C files loses compile-time checking that
the functions' calls match their definitions. Move them to header files.
Overhaul if_gre(4).
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
MFC r274289 (by bz):
gcc requires variables to be initialised in two places. One of them
is correctly used only under the same conditional though.
For module builds properly check if the kernel supports INET or INET6,
as otherwise various mips kernels without IPv6 support would fail to build.
MFC r274964:
Add ip_gre.h to ObsoleteFiles.inc.
r277637, and r283149 (by emaste@).
r276485 is the real change here, the rest deal with the fallout of
mp_ring's reliance on 64b atomics.
Use the incorrectly spelled 'eigth' from struct pkthdr in this branch
instead of MFC'ing r261733, which would have renamed the field of a
public structure in a -STABLE branch.
---
r276480:
Temporarily unplug cxgbe(4) from !amd64 builds.
r276485:
cxgbe(4): major tx rework.
a) Front load as much work as possible in if_transmit, before any driver
lock or software queue has to get involved.
b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This
is specifically for the tx multiqueue model where one of the if_transmit
producer threads becomes the consumer and other producers carry on as
usual. mp_ring is implemented as standalone code and it should be
possible to use it in any driver with tx multiqueue. It also has:
- the ability to enqueue/dequeue multiple items. This might become
significant if packet batching is ever implemented.
- an abdication mechanism to allow a thread to give up writing tx
descriptors and have another if_transmit thread take over. A thread
that's writing tx descriptors can end up doing so for an unbounded
time period if a) there are other if_transmit threads continuously
feeding the sofware queue, and b) the chip keeps up with whatever the
thread is throwing at it.
- accurate statistics about interesting events even when the stats come
at the expense of additional branches/conditional code.
The NIC txq lock is uncontested on the fast path at this point. I've
left it there for synchronization with the control events (interface
up/down, modload/unload).
c) Add support for "type 1" coalescing work request in the normal NIC tx
path. This work request is optimized for frames with a single item in
the DMA gather list. These are very common when forwarding packets.
Note that netmap tx in cxgbe already uses these "type 1" work requests.
d) Do not request automatic cidx updates every 32 descriptors. Instead,
request updates via bits in individual work requests (still every 32
descriptors approximately). Also, request an automatic final update
when the queue idles after activity. This means NIC tx reclaim is still
performed lazily but it will catch up quickly as soon as the queue
idles. This seems to be the best middle ground and I'll probably do
something similar for netmap tx as well.
e) Implement a faster tx path for WRQs (used by TOE tx and control
queues, _not_ by the normal NIC tx). Allow work requests to be written
directly to the hardware descriptor ring if room is available. I will
convert t4_tom and iw_cxgbe modules to this faster style gradually.
r276498:
cxgbe(4): remove buf_ring specific restriction on the txq size.
r277225:
Make cxgbe(4) buildable with the gcc in base.
r277226:
Allow cxgbe(4) to be built on i386. Driver attach will succeed only on
a subset of i386 systems.
r277227:
Plug cxgbe(4) back into !powerpc && !arm builds, instead of building it
on amd64 only.
r277230:
Build cxgbe(4) on powerpc64 too.
r277637:
Make sure the compiler flag to get cxgbe(4) to compile with gcc is used
only when gcc is being used. This is what r277225 should have been.
Rename the kld for oce(4) to if_oce.ko. ifconfig(8) has special knowledge
about kld filenames for network drivers that requires them to follow the
pattern of if_<foo>. This also fixes the existing documentation in the
manpage which says to use if_oce_load=YES in loader.conf.
PR: 199095
Various fixes for suspend and resume of PCI to PCI and PCI to Cardbus
bridges.
274633:
Remove stray empty comment. The code is adequately explained in the
block comment above, so there's nothing to add here.
274639:
Modernize comments about BIOSes being lame since in this detail they
aren't lame, the rules changed along the way. Catch up to 1999 or so
with the new rules.
274663:
Fix typo pointed out by avg@ and Joerg Sonnenberger. Add a clarifying
sentence too.
277233:
Suspend and resume were the only two functions not to follow the brdev
convention here, so fix that.
277234:
Move the suspsned and resume functions to the bus attachment. They
were accessing PCI config registers, which won't work for the ISA
version.
277235:
Always enable I/O, memory and dma cycles. Some BIOSes don't enable
them, sometimes they are reset for power state transitions or during
whatever happens while suspended. Also, it is good practice to always
do this.
281870:
Cosmetic change: use PCIR_SECLAT_2 rather than PCIR_SECLAT_1.
281871:
The minimim grant and maximum latency PCI config registers are only valid
for type 0 devices, not type 1 or 2 bridges. Don't read them for bridge
devices during bus scans and return an error when attempting to read them
as ivars for bridge devices.
281873:
Don't explicitly manage power states for PCI-PCI bridge devices in the
driver's suspend and resume routines. These have been redundant no-ops
since r214065 changed the PCI bus driver to manage power states for
all devices (including type 1/2 bridge devices) during suspend and resume.
281874:
Update the pci_cfg_save/restore routines to operate on bridge devices
(type 1 and type 2) as well as leaf devices (type 0). In particular,
this allows the existing PCI bus logic to save and restore capability
registers such as MSI and PCI-express work for bridge devices rather than
requiring that code to be duplicated in bridge drivers. It also means
that bridge drivers no longer need to save and restore basic registers
such as the PCI command register or BARs nor manage powerstates for the
bridge device.
While here, pci_setup_secbus() has been changed to initialize the 'sec'
and 'sub' fields in the 'secbus' structure instead of requiring the pcib
and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case.
- Virtualize interface cloner for gre(4). This fixes a panic when destroying
a vnet jail which has a gre(4) interface.
- Make net.link.gre.max_nesting vnet-local.
Fix for control endpoint handling in the DWC OTG driver. The data
stage processing is only allowed after the setup complete event has
been received. Else a race may occur and the OUT data can be corrupted.
While at it ensure resetting a FIFO has the required wait loop.
Merge 278459,278460,278461,278462 which define DTBDIR and other things
needed for install to work. Although the commit in head kinda fixed
install_as_user, it's unknown if that works in 10.x (it didn't the last
time I tried).
- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.
- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).
- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.
- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mprssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mprsas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.
- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mprsas_ata_id_timeout(). (Fixes PR 191348)
- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mprsas_prepare_tm().
- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.
- Fixed some formatting and whitespace.
- Bump version of mpr driver to 9.255.01.00-fbsd
PR: 191348
The NFS client wasn't handling getdirentries(2) requests for sizes
that are not an exact multiple of DIRBLKSIZ correctly. Fortunately
readdir(3) always uses an exact multiple of DIRBLKSIZ, so few applications
were affected. This patch fixes this problem by reducing the size
of the directory read to an exact multiple of DIRBLKSIZ.
Extend the maximum number of allowed PCM channels in a PCM stream to
127 and decrease the maximum number of sub-channels to 1. These
definitions are only used inside the kernel and can be changed later
if more than one sub-channel is desired. This has been done to allow
so-called USB audio rack modules to work with FreeBSD.
Add support for more than 8 audio channels per PCM stream for USB
audio class compliant devices under FreeBSD. Tested using 16 recording
and 16 playback audio channels simultaneously.
Bump the FreeBSD version to force recompiling all external modules.
It's common for multi-threaded processes to create a thread for
the purpose of synchronously processing signals. Allow such processes to
utilize a capabilities sandbox.
- Remove mac_get_fd/mac_set_fd - those are not syscalls. The
__mac_get_fd() and __mac_set_fd() syscalls are listed earlier.
- Correct typo in syscall name. It should be sched_rr_get_interval,
not sched_rr_getinterval.
In the reply to SADB_X_SPDGET message use the same sequence number that
was in the request. Some IKE deamons expect it will the same. Linux and
NetBSD also follow this behaviour.
PR: 137309
Remove THRMISC_VERSION. The thrmisc structure doesn't include a version
number, so this wasn't used (and can't easily be added). If at some point
we want to extend thrmisc, we will probably need to just add a new note
type and ensure that the new type includes a version number.
Move the 32-bit compatible procfs types from freebsd32.h to <sys/procfs.h>
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
libbfd looks for these types, and having them fixes 'gcore' in gdb of a
32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
dump code instead of duplicating the definitions.
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD
extension header type. The key_flush_sad() now will send SADB_EXPIRE
message when HARD lifetime expires. This is required by RFC 2367 and some
keying daemons rely on these messages. HARD lifetime messages have
precedence over SOFT lifetime messages, so now they will be checked first.
Also now SADB_EXPIRE messages will be send even the SA has not been used,
because keying daemons might want to rekey such SA.
PR: 200282, 200283
MFC r283102:
Change SA's state before sending SADB_EXPIRE message. This state will
be reported to keying daemon.
Remove route chaching support from ipsec code. It isn't used for some time.
* remove sa_route_union declaration and route_cache member from struct secashead;
* remove key_sa_routechange() call from ICMP and ICMPv6 code;
* simplify ip_ipsec_mtu();
* remove #include <net/route.h>;
Sponsored by: Yandex LLC
Read GEOM_UNCOMPRESS metadata using several requests that fit into
MAXPHYS. For large compressed images the metadata size can be bigger
than MAXPHYS and this triggers KASSERT in g_read_data().
Also use g_free() to free memory allocated by g_read_data().
PR: 199476
Fix two bugs that could result in PMC sampling effectively stopping.
In both cases, the the effect of the bug was that a very small positive
number was written to the counter. This means that a large number of
events needed to occur before the next sampling interrupt would trigger.
Even with very frequently occurring events like clock cycles wrapping all
the way around could take a long time. Both bugs occurred when updating
the saved reload count for an outgoing thread on a context switch.
First, the counter-independent code compares the current reload count
against the count set when the thread switched in and generates a delta
to apply to the saved count. If this delta causes the reload counter
to go negative, it would add a full reload interval to wrap it around to
a positive value. The fix is to add the full reload interval if the
resulting counter is zero.
Second, occasionally the raw counter value read during a context switch
has actually wrapped, but an interrupt has not yet triggered. In this
case the existing logic would return a very large reload count (e.g.
2^48 - 2 if the counter had overflowed by a count of 2). This was seen
both for fixed-function and programmable counters on an E5-2643.
Workaround this case by returning a reload count of zero.
PR: 198149
Sponsored by: Norse Corp, Inc.
- Move hwpmc(4) debugging code under a new HWPMC_DEBUG option instead of
the broader DEBUG option.
- Convert hwpmc(4) debug printfs over to KTR.
Sponsored by: Norse Corp, Inc.
