user VM spaces while servicing jobs. Update various comments and data
structures that refer to AIO daemons as threads to refer to processes
instead.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4999
In r55943, a per-process queue of pending socket AIO requests (requests
waiting for the socket to become ready) was added so that they could be
cancelled during process rundown. In r154765, the rundown code was
changed to handle jobs in this state (JOBST_JOBQSOCK) directly removing
the need for the extra queue. However, the per-process queue head and
global lock were never removed.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4997
1. vhold and zap immediately instead of postponing few lines later
2. increment numneg after new entry is added
No functional changes.
No objections: kib
Previously the code would just increment statistics while only holding a
shared lock, in effect losing updates.
Separate tracking for nchstats is removed as values can be obtained from
existing counters. Note that some fields are updated by external
consumers and are left unfixed. This should not be a serious issue as
this structure looks quite obsolete.
No strong objections: kib
a) Look for the CPL in the payload buffer instead of the descriptor.
b) Retrieve the socket associated with the tid with the inpcb lock held.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Redo LC calibration if temperature changed significantly since last
calibration.
Tested with RTL8188EU/RTL8188CUS in STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Obtained from: NetBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D4966
- Use bitmap for debug output selection.
- Add few new messages (one for URTWN_DEBUG_BEACON
and another one for URTWN_DEBUG_INTR).
- Replace an undocumented URTWN_DEBUG definition with USB_DEBUG.
Tested with RTL8188EU / RTL8188CUS in IBSS / HOSTAP modes.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4959
(by default it was set to 9us).
Tested with RTL8188EU / RTL8188CUS in STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4535
The .text, .bss, and .data sections claimed 16-byte alignment, but were
only aligned to 8 by the linker script.
Discovered with elfcopy(1) from elftoolchain, which performs validation
absent from the binutils strip(1). ELF tool chain ticket #512.
Reported by: brooks
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Add support for multiple TX and RX queue pairs. The default number of queues
is set to 4, but can be easily changed from the sysctl node hw.xn.num_queues.
Also heavily refactor netfront driver: break out a bunch of helper
functions and different structures. Use threads to handle TX and RX.
Remove some dead code and fix quite a few bugs as I go along.
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4193
This is a stub for PMSU driver. Note that it cannot be used to set the
secondary core boot address during attach because drivers are attached
later than SI_SUB_CPU sysinit where cores are started.
Setting the boot address should be done manually in platform_mp_start_ap().
SMP is working fine with this commit and was enabled in Armada38x kernel
configuration file.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4427
- Add file sys/arm/mv/armada38x/armada38x_mp.c
- Set mp_maxid and mp_ncpus based on FDT unless SCU register indicates
only one core
- Boot CPU1 in platform_mp_start_ap()
- IPI range defined
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4426
CPU1 is halted in bootROM code while it is waiting to be released.
Memory window to bootROM must be opened before booting the core.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4425
With this commit, watchdog is supported only in case of having
"mrvl,has-wdt" property or dedicated for watchdog compatibility field
("marvell,armada-380-wdt"). There is no need to modify dts files,
as "has-wdt" property already exists.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4424
A38X watchdog support was implemented in sys/arm/mv/timer.c driver.
It required following modifications:
- add "marvell,armada-380-wdt" compatibility, which supports only watchdog
- correct and enhance definitions related to timer control register
- unmask reset capability in RSTOUTn_MASK register
- use dedicated watchdog timer on A38X instead of second timer
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4423
New driver registers RTC as system clock. New RTC resolution is 1 sec.
Settime and gettime functions were implemented.
Reviewed by: andrew, ian
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Jan Dabros <jsd@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4421
Invalid (in FreeBSD) definition of PCI controller was
replaced with another one, working in FreeBSD environment.
PCI controller's entry had to move from its parent node
so as to be recognized properly by FBSD.
PCI was enabled in kernel configuration file.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4379
mv_pci driver omitted slot 0, which can be valid device on Armada38x.
New mechanism detects if device is root link, basing on vendor's
and device's IDs.
It is restricted to Armada38x; on other machines, behaviour remains
the same.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4377
Add conditions corresponding to Armada38x-based SoCs,
enhancing their remap capabilities.
This is required for PCIe to work properly.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4376
With this commit, USB 2.0 works fine on Armada38x platforms.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4375
Driver was modified to ensure it attaches properly to "marvell,orion-ehci"
node, which doesn't have error interrupt line defined. Neccessary
ofw_compat_data struct was added and probe procedure was altered.
Reviewed by: andrew, ian
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4369
uart_dev_ns8250 now relies on compatible property instead of additional
'busy-detect' cell. All drivers with compatible = "snps,dw-apb-uart" have
busy detection turned on. DTS files of devices affected by the change
were modified and 'busy-detect' property was removed.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4218
This compatibility string is used in .dts file of Armada38x
and isrequired for driver attachment.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4216
Add gic_decode_fdt function to fdt_pic_table, allowing to recognize GIC
interrupts on Armada38x. SOC_MV_ARMADA38X ifdef is required because A38X
is the only Marvell's platform in FreeBSD using GIC; lack of ifdef would
lead to linking errors on other platforms.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4214
Strict compatibility requirement is a root of problems when simplebus'
node has two compatibility strings (i.e. on Armada38x). Removing this
requirement should not interfere with other platforms.
fdt_is_compatible_strict() and fdt_find_compatible() calls were changed
in fdt_common.c and mv_common.c.
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4602
Ranges property of 'soc' node used two-cell addresses which resulted in
casting errors as simplebus resource allocation works with 32-bit u_long
variables. FDT ranges were simplified.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4212
This commit introduces initial support for Marvell Armada38x platform.
Changes:
- Add common DTS files for Armada38x SoCs and DTS file for A388-GP
- Add ARMADA38X kernel configuration
- Add option SOC_MV_ARMADA38X and set MV_PCI_PORTS
- Add list of files to compile
- Implement get_tclk(), get_sar_value(), cpu_reset() functions
- Add CPU ID and SoC numbers
- Correct ifdefs in arm/mv/timer.c
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4210
