The AR5416 and later TX descriptors have new fields for supporting
11n bits (eg 20/40mhz mode, short/long GI) and enabling/disabling
RTS/CTS protection per rate.
These functions will be responsible for initialising the TX descriptors
for the AR5416 and later chips for both HT and legacy frames.
Beacon frames will remain using the non-11n TX descriptor setup for now;
Linux ath9k does much the same.
Note that these functions aren't yet used anywhere; a few more framework
changes are needed before all of the right rate information is available
for TX.
algorithm described in the paper "Improved coexistence and loss tolerance for
delay based TCP congestion control" by Hayes and Armitage. It is implemented as
a kernel module compatible with the recently committed modular congestion
control framework.
CHD enhances the approach taken by the Hamilton-Delay (HD) algorithm to provide
tolerance to non-congestion related packet loss and improvements to coexistence
with loss-based congestion control algorithms. A key idea in improving
coexistence with loss-based congestion control algorithms is the use of a shadow
window, which attempts to track how NewReno's congestion window (cwnd) would
evolve. At the next packet loss congestion event, CHD uses the shadow window to
correct cwnd in a way that reduces the amount of unfairness CHD experiences when
competing with loss-based algorithms.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
algorithm based on the paper "A strategy for fair coexistence of loss and
delay-based congestion control algorithms" by Budzisz, Stanojevic, Shorten and
Baker. It is implemented as a kernel module compatible with the recently
committed modular congestion control framework.
HD uses a probabilistic approach to reacting to delay-based congestion. The
probability of reducing cwnd is zero when the queuing delay is very small,
increasing to a maximum at a set threshold, then back down to zero again when
the queuing delay is high. Normal operation keeps the queuing delay below the
set threshold. However, since loss-based congestion control algorithms push the
queuing delay high when probing for bandwidth, having the probability of
reducing cwnd drop back to zero for high delays allows HD to compete with
loss-based algorithms.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
based on the paper "TCP Vegas: end to end congestion avoidance on a global
internet" by Brakmo and Peterson. It is implemented as a kernel module
compatible with the recently committed modular congestion control framework.
VEGAS uses network delay as a congestion indicator and unlike regular loss-based
algorithms, attempts to keep the network operating with stable queuing delays
and no congestion losses. By keeping network buffers used along the path within
a set range, queuing delays are kept low while maintaining high throughput.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
There's two reasons for this:
* the raw and non-raw TX path shares a lot of duplicate code which should be
refactored;
* the 11n-ready chip TX path needs a little reworking.
Khelp/Hhook KPIs to hook into the TCP stack and maintain a per-connection, low
noise estimate of the instantaneous RTT. ERTT's implementation is robust even in
the face of delayed acknowledgements and/or TSO being in use for a connection.
A high quality, low noise RTT estimate is a requirement for applications such as
delay-based congestion control, for which we will be importing some algorithm
implementations shortly.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
sys/dev/ath/ath_hal/ar5416/ is getting very crowded and further
commits will make it even more crowded. Now is a good time to
shuffle these files out before any more extensive work is done
on them.
Create an ar9003 directory whilst I'm here; ar9003 specific
chipset code will eventually live there.
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init(). Consistently define mem_range_softc from
mem.c for all platforms. Add missing #include guards for machine/memdev.h
and sys/memrange.h. Clean up some nearby style(9) nits.
MFC after: 1 month
The controller is commonly found on DM&P Vortex86 x86 SoC. The
driver supports all hardware features except flow control. The
flow control was intentionally disabled due to silicon bug.
DM&P Electronics, Inc. provided all necessary information including
sample board to write driver and answered many questions I had.
Many thanks for their support of FreeBSD.
H/W donated by: DM&P Electronics, Inc.
algorithm based on the Internet-Draft "draft-leith-tcp-htcp-06.txt". It is
implemented as a kernel module compatible with the recently committed modular
congestion control framework.
H-TCP was designed to provide increased throughput in fast and long-distance
networks. It attempts to maintain fairness when competing with legacy NewReno
TCP in lower speed scenarios where NewReno is able to operate adequately. The
paper "H-TCP: A framework for congestion control in high-speed and long-distance
networks" provides additional detail.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: rpaulo (older patch from a few weeks ago)
MFC after: 3 months
algorithm based on the Internet-Draft "draft-rhee-tcpm-cubic-02.txt". It is
implemented as a kernel module compatible with the recently committed modular
congestion control framework.
CUBIC was designed for provide increased throughput in fast and long-distance
networks. It attempts to maintain fairness when competing with legacy NewReno
TCP in lower speed scenarios where NewReno is able to operate adequately. The
paper "CUBIC: A New TCP-Friendly High-Speed TCP Variant" provides additional
detail.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: rpaulo (older patch from a few weeks ago)
MFC after: 3 months
- This adds a VM SRIOV interface, ixv, it is however
transparent to the user, it links with the ixgbe.ko,
but when ixgbe is loaded in a virtualized guest with
SRIOV configured this will be detected.
- Sync shared code to latest
- Many bug fixes and improvements, thanks to everyone
who has been using the driver and reporting issues.
packets which go through each USB host controllers. Its implementations
are almost based on BPF code and very similar with it except it's
little bit customized for USB packet only. The userland program
usbdump(8) would be committed soon.
Discussed with: hps, thompsa, yongari
Move logic of building ACPI headers for acpi_wakeup.c into better places,
remove intermediate makefile and shell script, and reduce diff between i386
and amd64.
This can happen if the algos are built as modules but are not loaded. If
the selected ratectl algo is not available, try to load it (The load
module functions does nothing currently). Add a dummy ratectl algo which
always selects the first available rate. Use that one if the desired algo
is not available.
MFC after: 1 week
replace mii_phy_probe() altogether. Compared to the latter the advantages
of mii_attach() are:
- intended to be called multiple times in order to attach PHYs in multiple
passes (f.e. in order to only use sub-ranges of the 0 to MII_NPHY - 1
range)
- being able to pass along the capability mask from the NIC to the PHY
drivers
- being able to specify at which address (phyloc) to probe for a PHY
(instead of always probing at all addresses from 0 to MII_NPHY - 1)
- being able to specify which PHY instance (offloc) to attach
- being able to pass along MIIF_* flags from the NIC to the PHY drivers
(f.e. as required to indicated to the PHY drivers that flow control is
supported by the NIC driver, which actually is the motivation for this
change).
While at it, I used the opportunity to get rid of some hacks in mii(4)
like miibus_probe() generally doing work besides sheer probing and the
"EVIL HACK" (which will vanish entirely along with mii_phy_probe()) by
passing the struct ifnet pointer via an argument of mii_attach() as well
as to fix some resource leaks in mii(4) in case something fails.
Commits which will update the PHY drivers to honor the MII flags passed
down from the NIC drivers and take advantage of mii_attach() to get rid
of certain types of hacks in NIC and PHY drivers as well as a conversion
of the remaining uses of mii_phy_probe() will follow shortly.
Reviewed by: jhb, yongari
Obtained from: NetBSD (partially)
Unlike actual MTRR, this only controls the mapping attributes for
subsequent mmap() of /dev/mem. Nonetheless, the support is sufficiently
MTRR-like that Xorg can use it, which translates into an enormous increase
in graphics performance on PowerPC.
MFC after: 2 weeks
in the kernel (just as inet_ntoa() and inet_aton()) are and sync their
prototype accordingly with already mentioned functions.
Sponsored by: Sandvine Incorporated
Reviewed by: emaste, rstone
Approved by: dfr
MFC after: 2 weeks
- Don't probe for PHYs if we already know to use a SERDES. Unlike as with
cas(4) this only serves to speed up the the device attach though and can
only be determined via the OFW device tree but not from the VPD.
- Don't touch the MIF when using a SERDES.
- Add some missing bus space barriers, mainly in the PCS code path.
