wait(), waitpid() and usleep(), they are internal versions and
should not be cancellation points.
2. Make wait3() as a cancellation point.
3. Move raise() and pause() into file thr_sig.c.
4. Add functions _sigsuspend, _sigwait, _sigtimedwait and _sigwaitinfo,
remove SIGCANCEL bit in wait-set for those functions, the signal is
used internally to implement thread cancellation.
in rev. 1.34. Mainly I missed the fact that the buffer is used for two
purposes:
1) storing a group line from the group file;
2) __gr_parse_entry() parses the buffer and tries to put the group
members to the remaining part of the buffer and can fail if there
is no enough room for them.
Re-arrange the buffer size checks to account the latter case.
Submitted by: Kirk R Webb
MFC after: 2 weeks
In e_log.c, there was just a off-by-1 (1 ulp) error in the comment
about the threshold. The precision of the threshold is unimportant,
but the magic numbers in the code are easier to understand when the
threshold is described precisely.
In e_logf.c, mistranslation of the magic numbers gave an off-by-1
(1 * 16 ulps) error in the intended negative bound for the threshold
and an off-by-7 (7 * 16 ulps) error in the intended positive bound for
the threshold, and the intended bounds were not translated from the
double precision bounds so they were unnecessarily small by a factor
of about 2048.
The optimization of using the simple Taylor approximation for args
near a power of 2 is dubious since it only applies to a relatively
small proportion of args, but if it is done then doing it 2048 times
as often _may_ be more efficient. (My benchmarks show unexplained
dependencies on the data that increase with further optimizations
in this area.)
2**-28 as a side effect, by merging with the float precision version
of tanh() and the double precision version of sinh().
For tiny x, tanh(x) ~= x, and we used the expression x*(one+x) to
return this value (x) and set the inexact flag iff x != 0. This
doesn't work on ia64 since gcc -O does the dubious optimization
x*(one+x) = x+x*x so as to use fma, so the sign of -0.0 was lost.
Instead, handle tiny x in the same as sinh(), although this is imperfect:
- return x directly and set the inexact flag in a less efficient way.
- increased the threshold for non-tinyness from 2**-55 to 2**-28 so that
many more cases are optimized than are pessimized.
Updated some comments and fixed bugs in others (ranges for half-open
intervals mostly had the open end backwards, and there were nearby style
bugs).
functions are only for compatibility with obsolete standards. They
shouldn't be used, so they shouldn't be optimized. Use the generic
versions instead.
This fixes scalbf() as a side effect. The optimized asm version left
garbage on the FP stack. I fixed the corresponding bug in the optimized
asm scalb() and scalbn() in 1996. NetBSD fixed it in scalb(), scalbn()
and scalbnf() in 1999 but missed fixing it in scalbf(). Then in 2005
the bug was reimplemented in FreeBSD by importing NetBSD's scalbf().
The generic versions have slightly different error handling:
- the asm versions blindly round the second parameter to a (floating
point) integer and proceed, while the generic versions return NaN
if this rounding changes the value. POSIX permits both behaviours
(these functions are XSI extensions and the behaviour for a bogus
non-integral second parameter is unspecified). Apart from this
and the bug in scalbf(), the behaviour of the generic versions seems
to be identical. (I only exhusatively tested
generic_scalbf(1.0F, anyfloat) == asm_scalb(1.0F, anyfloat). This
covers many representative corner cases involving NaNs and Infs but
doesn't test exception flags. The brokenness of scalbf() showed up
as weird behaviour after testing just 7 integer cases sequentially.)
to scalbf(), but ldexpf() cannot be implemented in that way since the
types of the second parameter differ. ldexpf() can be implemented as
a weak or strong reference to scalbnf() (*) but that was already done
long before rev.1.10 was committed. The old implementation uses a
reference, so rev.1.10 had no effect on applications. The C files for
the scalb() family are not used for amd64 or i386, so rev.1.10 had even
less effect for these arches.
(*) scalbnf() raises the radix to the given exponent, while ldexpf()
raises 2 to the given exponent. Thus the functions are equivalent
except possibly for their error handling iff the radix is 2. Standards
more or less require identical error handling. Under FreeBSD, the
functions are equivalent except for more details being missing in
scalbnf()'s man page.
well as avoiding a switch statement. This change has no significant impact
to performance when branch prediction is successful at predicting the sizes
of objects passed to free(), but in the case that the object sizes are
semi-random, this change has the potential to prevent many branch prediction
misses, thus improving performance substantially.
Take advantage of alignment guarantees in ipalloc(), and pad object sizes to
something less than a power of two when possible. This has the potential
to substantially reduce internal fragmentation for objects allocated via
posix_memalign().
Avoid an unnecessary pow2_ceil() call in arena_ralloc().
Submitted by: djam8193ah@hotmail.com
and instead creating a small allocation for each malloc(0) call. The
optional SysV compatibility behavior remains unchanged.
Add a couple of assertions.
Fix a couple of typos in error message strings.
The text is correct in the "DESCRIPTION" section, so fix "SYNOPSIS"
to use the correct name.
PR: docs/90498
Submitted by: Vasil Dimov
MFC after: 3 days
do its work for SIGINFO. Always install libpthread signal handler
wrapper for SIGINFO even if user SIG_IGN's or SIG_DFL's it.
SIGINFO has a special meaning for libpthread: when LIBPTHREAD_DEBUG
enviroment variable defined it is used for dumping an information
about threads to /tmp/.
Reported by: mi
Reviewed by: deischen
MFC after: 2 weeks
If the initial buffer size (1KB) for the given group line is not big
enough, reset the offset. It helps to do not miss this line when
getrg() reallocates the larger buffer and tries to parse the line again.
PR: bin/52433, kern/55031, bin/83696, misc/97640, misc/98111
Submitted by: bsw71@mail.ru, Philip M. Gollucci, Justin Erenkrantz
Glanced at: nectar
MFC after: 1 month
objects with SF_IMMUTABLE, SF_APPEND, or SF_NOUNLINK.
* Document that non-superusers cannot set or clear any SF_* flag
(setting fails with EPERM, clearing is silently ignored).
* Document that superusers cannot change any flag if one of
SF_IMMUTABLE, SF_APPEND, SF_NOUNLINK is set and securelevel is
greater than 0.
* Document SF_SNAPSHOT and note that it is maintained by the
system and is, for this reason, impossible to set to clear by
any user.
PR: docs/33877
Submitted by: harti
Help by: George Marsellis <gam9478@njit.edu>
MFC after: 1 week
4kB pages), in order to avoid dangerous rounding error when calculating
fullness limits during run promotion/demotion.
Convert a structure bitfield to a normal field in areana_run_t. This should
have been changed along with the other fields in revision 1.120.
in part by OpenBSD's not-quite-standard-compliant
standard libraries. (No loss of functionality,
just minor recoding to not rely on certain "standard"
facilities that weren't actually needed.)
bounds. [1]
Modify logic for utilizing the data segment, such that it is possible to
create huge allocations there.
Shrink the data segment when deallocating a chunk, if it is at the end of
the data segment.
Rename chunk_size to csize in huge_malloc(), in order to avoid masking a
static variable of the same name. [1]
Reported by: Paul Allen <nospam@ugcs.caltech.edu>
subject: ranges of uid, ranges of gid, jail id
objects: ranges of uid, ranges of gid, filesystem,
object is suid, object is sgid, object matches subject uid/gid
object type
We can also negate individual conditions. The ruleset language is
a superset of the previous language, so old rules should continue
to work.
These changes require a change to the API between libugidfw and the
mac_bsdextended module. Add a version number, so we can tell if
we're running mismatched versions.
Update man pages to reflect changes, add extra test cases to
test_ugidfw.c and add a shell script that checks that the the
module seems to do what we expect.
Suggestions from: rwatson, trhodes
Reviewed by: trhodes
MFC after: 2 months
far more convenient for libkvm to work with because of the page table
block at the beginning. As a result, the MD code is smaller.
libkvm will automatically detect old vs mini dumps on i386 and amd64.
libkvm will handle i386 PAE and non-PAE modes. There is a PAE flag in
the i386 minidump header to signal the width of the entries in the
page table block.
Other convenient values are also present, such as kernbase and the direct
map addresses on amd64.
to pidfile_write happen, the pidfile will have nul characters prepended
due to the cached file descriptor offset...
Reviewed by: scottl
MFC after: 3 days
as well as add __sparc_utrap_install to FBSD_1.0; these are required by
the SCD libc 64 psABI and thus meant to be officially exported symbols.
- Remove the __fpu_* entries as well as the __sigtramp entry altogether as
these are internal to the libc FPU emulation and the signal trampoline
initialization in sigaction(2) respectively and thus don't need to be
externally visible.
- Add __sparc_utrap_setup to the list of FBSDprivate symbols as it's used
in src/lib/csu/sparc64/crt1.c to initialize the libc FPU emulation (I
think alternatively src/lib/csu/sparc64/crt1.c could be changed to use
__sparc_utrap_install instead, at the expense of increasing the size of
executables a bit).
- Add an entry for the vfork symbol to the FBSD_1 list and entries for it's
associated symbols generated by the RSYSCALL() macro to the FBSDprivate
list. There's some magic in place that automatically generates code for
vfork() if there's no explicit MD code for it so it might make sense to
move these symbols from the MD symbol map files to a MI one.
The last two changes make the libc symbol versioning useable on sparc64.
Ok'ed by: deischen
races. This isn't currently necessary for libpthread or libthr, but
without it external threads libraries like the linuxthreads port are
not safe to use.
Reported by: ganbold@micom.mng.net
have to be calculated once per allocator operation.
Make nil const.
Update various comments.
Remove/avoid division where possible.
For the one division operation that remains in the critical path, add a
switch statement that has a case for each small size class, and do division
with a constant divisor in each case. This allows the compiler to generate
optimized code that does not use hardware division [1].
Obtained from: peter [1]
this is used by some 3rd party applications when {e,f,g}cvt() are
not found. POSIX defines the xcvt() funtions but says they are
deprecated in favor or sprintf(). We'll import these functions
from OpenBSD and remove __gdtoa() from the exported interfaces
when libc version is bumped.
* Avoid choosing an arena until it's certain that an arena is needed
for allocation.
* Convert division/multiplication to bitshifting where possible.
* Avoid accessing TLS variables in single-threaded code.
* Reduce the amount of pointer dereferencing.
* Move lock acquisition in critical paths to only protect the the code
that requires synchronization, and completely remove locking where
possible.
uses them.
Now, we have res_nupdate and res_nmkupdate as well, but they are
still based on our old resolver for binary backward compatibility.
So, they don't provide new features such as TSIG support.
Reported by: pointyhat via kris
FBSDprivate locale symbols. These functions are needed by
libcompat.
Add _cleanup to the list of stdio FBSDprivate symbols. Some
third party applications use this. This will be removed and
replaced by fcloseall() once libc version is bumped.
Add _res to the list of resolv symbols.
Found by: portbuilder runs (thanks Kris!)
to make it work, turnstile like mechanism to support priority
propagating and other realtime scheduling options in kernel
should be available to userland mutex, for the moment, I just
want to make libthr be simple and efficient thread library.
Discussed with: deischen, julian
Kernel changes:
Inform hwpmc of executable objects brought into the system by
kldload() and mmap(), and of their removal by kldunload() and
munmap(). A helper function linker_hwpmc_list_objects() has been
added to "sys/kern/kern_linker.c" and is used by hwpmc to retrieve
the list of currently loaded kernel modules.
The unused `MAPPINGCHANGE' event has been deprecated in favour
of separate `MAP_IN' and `MAP_OUT' events; this change reduces
space wastage in the log.
Bump the hwpmc's ABI version to "2.0.00". Teach hwpmc(4) to
handle the map change callbacks.
Change the default per-cpu sample buffer size to hold
32 samples (up from 16).
Increment __FreeBSD_version.
libpmc(3) changes:
Update libpmc(3) to deal with the new events in the log file; bring
the pmclog(3) manual page in sync with the code.
pmcstat(8) changes:
Introduce new options to pmcstat(8): "-r" (root fs path), "-M"
(mapfile name), "-q"/"-v" (verbosity control). Option "-k" now
takes a kernel directory as its argument but will also work with
the older invocation syntax.
Rework string handling in pmcstat(8) to use an opaque type for
interned strings. Clean up ELF parsing code and add support for
tracking dynamic object mappings reported by a v2.0.00 hwpmc(4).
Report statistics at the end of a log conversion run depending
on the requested verbosity level.
Reviewed by: jhb, dds (kernel parts of an earlier patch)
Tested by: gallatin (earlier patch)
determine its value at run time according to other relevant values. This
avoids the creation of runs that are incompletely utilized, as long as
pagesize isn't too large (>32kB, given the current RUN_MIN_REGS_2POW
setting).
Increase the size of several structure bitfields in arena_run_t in order
to avoid integer overflow in the case that a run's header does not overlap
with the space that is usable as application allocation regions. Given
the tiny_min_2pow change, this fix has no additional impact unless
pagesize is >32kB.
Reported by: kris
internally used chunk to start at the beginning of the heap, rather
than at a chunk-aligned address. This reduces mapped memory somewhat
for 32-bit architectures.
Add the arena_run_link_t type and use it wherever a run object is only
used as a ring 'header'. This saves approximately 40 kB of memory per
arena.
Remove an obsolete (no longer used) code path from base_alloc(), which
supported the internal allocation of objects larger than the chunk
size.
Enhance chunk_dealloc() to cache chunk addresses for all deallocated
chunks. This has no impact for most programs, but has the potential
to reduce VM map fragmentation for programs that use huge
allocations.
documentation bug. We switched to page indexes some time around
FreeBSD 2.2. The actual 'len' limit is the maximum file size or what
will fit in your address space, whichever comes first. It should be
possible to make 1TB files on 32 bit systems, but of course address space
runs out long before then.
it's only a failure if there were actually attributes to be restored.
In particular, this fixes the problem where tar -xp always returned
a failure code on FreeBSD (which doesn't yet have all of the extended
attribute support).
Thanks to: Diego "Flameeyes" Petteno
This commit implements storing/reading POSIX.1e-style extended
attribute information in "pax" format archives. An outline of the
storage format is in the tar.5 manpage. The archive_read_extract()
function has code to restore those archives to disk for Linux; FreeBSD
implementation is forthcoming.
Many thanks to Jaakko Heinonen for finding flaws in earlier
proposals and doing the bulk of the coding in this work.
Since, res_sendsigned(3) and the friends use MD5 functions, it is
hard to include them without having MD5 functions in libc. So,
res_sendsigned(3) is not merged into libc.
Since, res_update(3) in BIND9 is not binary compatible with our
res_update(3), res_update(3) is leaved as is, except some
necessary modifications.
The res_update(3) and the friends are not essential part of the
resolver. They are not defined in resolv.h but defined in
res_update.h separately in BIND9. Further, they are not called from
our tree. So, I hide them from our resolv.h, but leave them only
for binary backward compatibility (perhaps, no one calls them).
Since, struct __res_state_ext is not exposed in BIND9, I hide it
from our resolv.h. And, global variable _res_ext is removed. It
breaks binary backward compatibility. But, since it is not used from
outside of our libc, I think it is safe.
Reviewed by: arch@ (no objection)
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
that no linear searching is necessary if we resort to allocating from a
run that is known to be mostly full. There are pathological edge cases
that could have caused severely degraded performance, and this change
fixes that.
close enough to each other that reallocation would allocate a new region
of the same size. This improves the performance of repeated incremental
reallocations by up to three orders of magnitude. [1]
Fix arena_new() to properly constrain run size if a small chunk size was
specified during runtime configuration.
Suggested by: se [1]
