Resurrect set_rcvar() as a function to define a rc.conf variable.
It defines a variable and its default value in load_rc_config() just after
rc.conf is loaded. "rcvar" command shows the current and the default values.
Restructure rc.d scripts for kerberos5 daemons:
- Rename $kerberos5_server_enable with $kdc_enable and rename
rc.d/kerberos with rc.d/kdc.
- Rename $kadmin5_server_enable with $kadmind_enable.
- Rename ${kerberos5,kpasswdd}_server with ${kdc,kpasswdd}_program.
- Fix rc.d/{kadmind,kerberos,kpasswdd,kfd} scripts not to change variables
after load_rc_config().
- Add rc.d/ipropd_master and rc.d/ipropd_slave scripts. These are
for iprop-master(8) and iprop-slave(8). Keytab used for iprop service is
defined in ipropd_{master,slave}_keytab (/etc/krb5.keytab by default).
- Add dependency on rc.d/kdc to SERVERS. rc.d/kdc must be invoked as early
as possible before scripts divided by rc.d/SERVERS.
Note that changes to rc.d/{kdc,kpasswdd,kadmind} are backward-compatible
with the old configuration variables:
${kerberos5,kpasswdd,kadmin5}_server{,_enable,_flags}.
Fix rc.d/gssd script to define the default values in a standard way.
MFC r270781:
- Add a warning message when an IPv6 address is specified with no prefixlen.
- Use a parameter argument in jls(8) instead of doing grep.
Move configuration of IPv6 NDP flags to a point before handling ifconfig_IF.
This fixes a race that a non-IPv4 interface can get an EUI64 LLA even if it
has IFDISABLED nd6 flag at boot time.
- Add $netif_ipexpand_max to specify the upper limit for the number of
addresses generated by an address range specification. The default value
is 2048. This can be increased by setting $netif_ipexpand_max in rc.conf.
PR: 186841
Import HyperV Key-Value Pair (KVP) driver and daemon code by Microsoft,
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
Approved by: re (gjb)
Though this passes the buildworld test, this fails during
installworld with:
make[3]: "/releng/scripts-release/chroots/10/i386/release/etc/devd/Makefile"
line 13: Malformed conditional (${MK_HYPERV} != "no")
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
Import HyperV Key-Value Pair (KVP) driver and daemon code by Microsoft,
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
Approved by: re (gjb)
Permit use of "no" as specification of a Norwegian keymap file.
Only "keymap=NO" (the default in defaults/rc.conf) or "keymap="
(an empty value) will prevent loading of a keymap file.
Approved by: re (gjb)
'distribute' target to fix the WITH_TESTS=1 build.
This is a direct commit to stable/10.
Submitted by: ngie
Approved by: re (rodrigc)
Sponsored by: The FreeBSD Foundation
Phabric: https://reviews.freebsd.org/D706
Approved by: rpaulo (mentor)
Approved by: re (gjb)
Reviewed by: jmmv
Sponsored by: EMC / Isilon Storage Division
r267176:
Add the *_TESTS_SH_SED_* functionality to atf.test.mk.
This exists already in plain.test.mk and tap.test.mk and should have been
added to atf.test.mk too when the feature was first introduced.
(It is probably time to address the related TODOs but I will do that
separately.)
r267181:
Move atf-sh from /usr/bin/ to /usr/libexec/
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
r268445:
Fix atf-sh's integration_test
With the move of atf-sh into /usr/libexec in r267181, some of the
tests in the integration_test program broke because they could not
execute atf-sh from the path any longer.
This slipped through because I do have a local atf installation in
my home directory that appears in my path, hence the tests could
still execute my own version.
Fix this by forcing /usr/libexec to appear at the beginning of the
path when attempting to execute atf-sh.
To make upgrading easy (and to avoid an unnecessary entry in UPDATING),
make integration_test depend on the Makefile so that a rebuild of the
shell script is triggered. This requires a hack in the *.test.mk files
to ensure the Makefile is not treated as a source to the generated
program. Ugly, I know, but I don't have a better way of doing this at
the moment. Will think of one once I address the TODO in the *.test.mk
files that suggests generalizing the file generation functionality.
PR: 191052
Reviewed by: Garrett Cooper
MFC r270653: Update man-pages to correctly refer to changed pathes and namin
MFC r270657: More man pages that need to know about vt in addition to syscon
MFC r270659: (by pluknet@) Missed comma.
MFC r270660: Back-out the references to vt(4) from this man-page. It appears
MFC r270933: Add references to vt(4) to further man-pages.
MFC r270934: Final patches to the tools used to convert syscons keymaps for
MFC r270935: Add vt(4) support to the console initialisation script, specifi
Second batch of MFCs to add support for Unicode keymaps for use with vt(4).
It contains the following changes:
- Add references to vt(4) to relevant man-pages.
- Update comment in defaults/rc.conf to mention vt
- Update rc.d/syscons to warn about syscons keymaps used under vt.
An attempt is made to identify the vt keymap to load instead.
- Minor changes to the conversion tool based on mail comments on keymaps.
Relnotes: yes
r266650:
Change libatf-c and libatf-c++ to be private libraries.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
r267172:
Homogenize libatf-* version numbers with upstream.
The libatf-* major version numbers in FreeBSD were one version ahead of
upstream because, when atf was first imported into FreeBSD, the upstream
numbers were not respected. This is just confusing and bound to cause
problems down the road.
Fix this by taking advantage of the fact that libatf-* are now private
and that atf is not yet built by default. However, and unfortunately, a
clean build is needed for tests to continue working once "make
delete-old-libs" has been run; hence the note in UPDATING.
Phabric: D701
Approved by: jmmv (maintainer, mentor)
Bring in the new automounter, similar to what's provided in most other
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
Relnotes: yes
Sponsored by: The FreeBSD Foundation
r269906:
Add missing BSD.tests.dist entry for lib/libutil to unbreak installworld with
MK_TESTS == no
Phabric: D555
Approved by: jmmv (mentor, implicit)
Pointyhat to: ngie
r269904:
Integrate lib/libutil into the build/kyua
Remove the .t wrappers
Rename all of the TAP test applications from test-<test> to
<test>_test to match the convention described in the TestSuite
wiki page
humanize_number_test.c:
- Fix -Wformat warnings with counter variables
- Fix minor style(9) issues:
-- Header sorting
-- Variable declaration alignment/sorting in main(..)
-- Fit the lines in <80 columns
- Fix an off by one index error in the testcase output [*]
- Remove unnecessary `extern char * optarg;` (this is already provided by
unistd.h)
Phabric: D555
Approved by: jmmv (mentor)
Obtained from: EMC / Isilon Storage Division [*]
Submitted by: Casey Peel <cpeel@isilon.com> [*]
Sponsored by: EMC / Isilon Storage Division
'distribute' target of etc/Makefile, because we do not
allow command-line use of 'make MK_TESTS=no' in stable/10.
This fixes a regression introduced in r270187 that causes
the release build to fail, and a direct commit to stable/10.
Sponsored by: The FreeBSD Foundation
Integrate lib/libmp into the build/kyua
- Remove the .t wrapper
- Fix -Wreturn-type warnings with clang
This change has been tested on amd64/i386
Phabric: D530
Reviewed by: jmmv
Approved by: jmmv (co--mentor)
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
MFC note: src.opts.mk in the original commit was changed to
bsd.own.mk.
r270004
Convert devd's client socket to type SOCK_SEQPACKET.
This change consists of two merges from projects/zfsd/head along with the
addition of an ATF test case for the new functionality.
sbin/devd/tests/Makefile
sbin/devd/tests/client_test.c
Add ATF test cases for reading events from both devd socket types.
r266519:
sbin/devd/devd.8
sbin/devd/devd.cc
Create a new socket, of type SOCK_SEQPACKET, for communicating with
clients. SOCK_SEQPACKET sockets preserve record boundaries,
simplying code in the client. The old SOCK_STREAM socket is retained
for backwards-compatibility with existing clients.
r269993:
sbin/devd/devd.8
Fix grammar bug.
r270019 (from bz)
Remove bogus ; at the end of the if condition in order to unbreak gcc builds
after r270004.
MFC after: 4 days
X-MFX with: r270004
Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.
Put the test suite in its own tests.txz distribution file.
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install
Create a mechanism for providing fine-grained build order dependencies
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".
work if ifname has any of [.-/+].
While here, also perform the following to reduce diff size between major
branches for etc/network.subr:
MFC r266475 (rea): Fix warning messages after r252015
$alias used to hold alias number, but now it carries full variable name,
so messages were tuned to account for that.
Other fixes:
- eliminate unneeded double spaces;
- tell user where inet/inet6 keywords are expected to be.
Reviewed by: hrs
Spotted by: jhay
PR: conf/191961
Add a new flag to /etc/ttys: onifconsole. This is equivalent to "on" if the
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default. Set this flag
on x86 systems for ttyu0.
Comments and suggestions by: grehan, dteske, jilles
