This shortens the lock hold time while not affecting corretness.
All the woken up threads end up competing can lose the race against
a completely unrelated thread getting the lock anyway.
1200046, the first version that supports this feature. If we set it,
then use an old kernel, we'll break the 'contract' of having
checksummed cylinder groups this flag signifies. To avoid creating
something with an inconsistent state, don't turn the flag on in these
cases. The first full fsck with a new kernel will turn this on.
Spnsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13114
The intent appears to be having one RX/TX queue set per core,
but since scctx->isc_n[tr]xqsets is set to max before calling
iflib_msix_init(), both end up being set to total number of cores.
Use ctx->ifc_sysctl_n[rt]xqs as the selected value and
scctx->isc_n[rt]xqsets as the max. This should result in what appears
to be the intended behaviour
Reviewed by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13096
It is for console presented at 2001 and featuring Pentium III
processor. Even if any of them are still alive and run FreeBSD, we do
not have any sign of life from their users. While removing another
dozens of #ifdefs from the i386 sources reduces the aversion from
looking at the code and improves the platform vitality.
Reviewed by: cem, pfg, rink (XBOX support author)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13016
In general, higher-level code will atomically verify that the process
is not exiting and hold the process. In one case, we were using uwrite()
to copy a probed instruction to a per-thread scratch space block, but
copyout() can be used for this purpose instead; this change effectively
reverts r227291.
MFC after: 1 week
tunables. Add num_vis to the intrs_and_queues structure as it affects
the number of interrupts requested and queues created. In future
cfg_itype_and_nqueues might lower it incrementally instead of going
straight to 1 when enough interrupts aren't available.
Sponsored by: Chelsio Communications
The HMAC construction natively permits any key size between 0 and the input
block length. Before r324017, the auth_hash 'keysize' member was the hash
output length, which was used by ipsec for key sizes. (Non-ipsec consumers
need the ability to use other keysizes, hence, r324017.)
The ipsec SADB code blindly uses the auth_hash 'keysize' member for both
minimum and maximum key size, which is wrong (from an HMAC perspective).
For now, just switch it to 'hashsize', which matches the existing
expectations.
Instead it should probably use the range [0, keysize]. But there may be
other broken code in ipsec that rejects hashes with too small a minimum
key size.
Reported by: olivier@
Reviewed by: olivier, no objection from ae
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12770
In xpt_bus_register(), remove superfluous call to free(). This was mostly
benign since free(9) checks for NULL before doing anything, and
xpt_create_path() is nice enough to NULL out the pointer on failure.
However, it could've segfaulted if malloc(9) failed during
xpt_create_path().
Submitted by: gibbs
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
hardware sizes.
32bit counters already overflow on approachable virtual memory page
counts, and soon would overflow on the physical pages counts as well.
Bump sizes to 64bit types. Bump __FreeBSD_version.
It is impossible to provide perfect backward ABI compat for this
change. If a program requests an old structure, it can be detected by
size. But if it queries the size first by passing NULL old req
pointer, there is almost nothing we can do to detect the desired ABI.
As a partial solution, check p_osrel of the quering process when
selecting the size to report.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Differential revision: https://reviews.freebsd.org/D13018
the ARC reclaim thread running longer than needed.
Update the arc::needfree dtrace probe triggered in arc_lowmem() to also report
the value we may want to free.
Submitted by: Nikita Kozlov <nikita.kozlov at blade-group.com>
Reviewed by: avg
Approved by: avg
MFC after: 3 weeks
Sponsored by: blade
Differential Revision: https://reviews.freebsd.org/D12163
Background:
The coming ibcore update forces an update of mlx4ib(4) which in turn requires
an updated mlx4 core module. This also affects the mlx4en(4) module because
commonly used APIs are updated. This commit is a middle step updating the
mlx4 modules towards the new ibcore.
This change contains no major new features.
Changes in mlx4:
a) Improved error handling when mlx4 PCI devices are
detached inside VMs.
b) Major update of codebase towards Linux 4.9.
Changes in mlx4ib(4):
a) Minimal changes needed in order to compile using the
updated mlx4 core APIs.
Changes in mlx4en(4):
a) Update flow steering code in mlx4en to use new APIs for
registering MAC addresses and IP addresses.
b) Update all statistics counters to be 64-bit.
c) Minimal changes needed in order to compile using the
updated mlx4 core APIs.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The setbit/clearbit pair casts the bitfield pointer
to uint8_t* which effectively treats its contents as
little-endian variable. The ffs() function accepts int as
the parameter, which is big-endian. Use uint8_t here to
avoid mismatch, as we have only 4 doorbells.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D13084
__BSD_VISIBLE is always defined and it's value instead needs to be
tested via #if to determine if FreeBSD-specific APIs should be
exposed.
PR: 196226, 223481 (exp-run)
Submitted by: pluknet
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12977
clock_ts_to_ct has a KASSERT that the converted year fits into four
digits. By default (sysctl debug.allow_insane_settime is 0) the kernel
disallows a time too far in the future, using a value of 9999 366-day
years. However, clock_settime is epoch-relative and the assertion will
fail with a tv_sec corresponding to some 8030 years.
Avoid trying to be too clever, and just use a limit of 8000 365-day
years past the epoch.
Submitted by: Heqing Yan <scottieyan@gmail.com>
Reported by: Syzkaller (https://github.com/google/syzkaller)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
No longer return ENXIO when trying to send an IPv6 packet in
nicvf_sq_add_hdr_subdesc().
Restructure the code so that the upper layer protocol parts are
agnostic of the L3 protocol (and no longer specific to IPv4).
With this basic IPv6 packets go through. We are still seeing
weird behaviour which needs further diagnosis.
PR: 223669
In collaboration with: emaste
MFC after: 3 days
The driver is currently hardcoded to force promiscuous mode, so all of
the MAC filtering code is presently unused and multicast should "just
work." Report to the higher layers that multicast is supported.
PR: 223573
Reported by: bz
Sponsored by: The FreeBSD Foundation, Packet.net (hardware)
Different compilers may optimise the enum type in different ways. This ensures
coherency when range checking the value of enums in ibcore.
Sponsored by: Mellanox Technologies
MFC after: 1 week
variable. Access the variable directly instead of going through the sysctl()
interface in the kernel.
Sponsored by: Mellanox Technologies
MFC after: 1 week
link-local addresses when VIMAGE is enabled will cause a so-called NULL
pointer dereferencing issue.
Sponsored by: Mellanox Technologies
MFC after: 1 week
information for that and XPT_PATH_INQ. Provide macros to encode/decode
major/minor versions. Read the link speed and lane count to compute
the base_transfer_speed for XPT_PATH_INQ.
Sponsored by: Netflix
The interrupt map wasn't being allocated properly, preventing IRQs from being
allocated to children of the PCIe bus. Fix this by cloning the ofw_pcib_pci
code, which handles all cases -- device tree and probed.
In the future this may become a subclass of the ofw_pcib_pci driver, but as
that's not an exported class, it's cloned for now.
MFC after: 3 weeks
Summary:
ofw_parse_bootargs() was added in r306065 as an attempt to unify the
various copies of the same code. This simply migrates BERI to use it.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D12962
kern.poweroff_on_panic which, when enabled, instructs a system to
power off on a panic instead of a reboot.
kern.powercyle_on_panic which, when enabled, instructs a system to
power cycle, if possible, on a panic instead of a reboot.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13042
loader.conf for uboot have this in the list, but the default one
didn't. Since there's no harm and it's a failsafe, add it to the list.
Sponsored by: Netflix
The PT_DETACH case above the sendsig: label already looped over all
threads clearing flags in td_dbgflags. Reuse this loop to clear
TDB_SUSPEND and move the logic out of the sendsig: block.
Most of the conditionals in the 'sendsig:' block are now only different
for PT_ATTACH vs other continue requests. Pull the PT_ATTACH-specific
logic up into the PT_ATTACH case and simplify the 'sendsig:' block. This
also permits moving the unlock of proctree_lock above the sendsig: label
since PT_KILL doesn't hold the lock and and the other cases all fall
through to the label.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D13073
loader.conf is also different between machines. On arm it's a minimal
one that's not quite compatible with the default one. On arm it's
minimal for speed, which is good, but there's also extra things in it
relative to the default on which break loading FDT which is bad. This
doesn't address that issue, but instead ensures the minimal one for
arm is used.
A similar issue for mips exists, but since we can have a beri variant
of /boot/loader and a uboot variant, I'm leaving that mess alone for
the moment.
Sponsored by: Netflix
This fixes a panic when attaching to an already-stopped process after
r325028. While here, clean up a few other things in the control flow
of the 'sendsig' section:
- Only check for P_STOPPED_TRACE rather than either of P_STOPPED_SIG
or P_STOPPED_TRACE for most ptrace requests. The signal handling
code in kern_sig.c never sets just P_STOPPED_SIG for a traced
process, so if P_STOPPED_SIG is stopped, P_STOPPED_TRACE should be
set anyway. Remove a related debug printf. Assuming P_STOPPED_TRACE
permits simplifications in the 'sendsig:' block.
- Move the block to clear the pending thread state up into a new
block conditional on P_STOPPED_TRACE and handle delivering pending
signals to the reporting thread and clearing the reporting thread's
state in this block.
- Consolidate case to send a signal to the process in a single case
for PT_ATTACH. The only case that could have been in the else before
was a PT_ATTACH where P_STOPPED_SIG was not set, so both instances
of kern_psignal() collapse down to just PT_ATTACH.
Reported by: pho, mmel
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D12837
Since r324184 the root node compatible for rpi2 is "brcm,bcm2836", add
it to the compatible list of bcm2835_cpufreq.
Tested On: RPI2 v1.1 RPI2 v1.2
Reported by: many on freebsd-arm@
in the LinuxKPI returns NULL. This happens when the VM area's private
data handle already exists and could cause a so-called NULL pointer
dereferencing issue prior to this fix.
Found by: greg@unrelenting.technology
MFC after: 1 week
Sponsored by: Mellanox Technologies
Note that PMCLOG_RESERVE_WITH_ERROR() macro contains goto error;
statement and executed after the flag is set.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
only works because we have -Isys on the command line. We also have
-Isys/boot/userboot on the command line, so bring it in directly with
<userboot.h>. No functional change, but it removes one hard to see
dependency on the boot loader's location in sys/boot.
Sponsored by: Netflix
r325681 fixed a NULL pointer dereference on RPi3 caused by a lack of
functionality in uboot's EFI implementation. That rev checked the boot1
load path for NULL but not the load device. In practice if the former
works the latter will as well, but improve correctness by checking each
separately.
Submitted by: Keith White <kwhite@eecs.uottawa.ca>
Reported by: jhb
MFC after: 5 days
MFC with: r325681
Sponsored by: The FreeBSD Foundation
There were two things wrong. First, the wrong path was listed in .PATH
statement. Second, BOOTSRC wasn't yet defined for the .PATH, so it
didn't properly add it. Third, even if these were right, . was in the
path before, so it wouldn't have worked. Replace this with a simple
loop so the proper loader.rc gets selected.
Noticed by: dhw@ (menus stopped working on boot)
Sponsored by: Netflix
LinuxKPI task struct. Change type of "state" variable from "int" to
"atomic_t" to simplify code and avoid unneccessary casting.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Also, move generation of loader.help into loader.mk. Set HELP_FILES=
to disable this (so we only install one help file, for now). At the
same time remove some duplicate -I lines. Fix several FILES= and
CLEANFILES= into the += form since we're touching both of those in the
.mk files. Make sure we only build one loader.help file per platform
in a unified way (we were building many on some, with the last to
install winning, though often they were the same text).
Also, we're now installing loader.rc and menu.rc everywhere. arm and
mips uboot installed these as menu.rc.sample, but there's no need
since the loader.rc for those platforms doesn't do menu.rc processing
by default. pcibios.4th is now installed everywhere, but will failsafe
on non x86 platforms (it isn't loaded by default anywhere).
These changes are too intertwined to do separately since aspects of
each are required to have a bug-free commit.
Sponsored by: Netflix
Transition to WITH/WITHOUT_LOADER_GELI to flag support or not of GELI
in the boot loaders. Add HAVE_GELI so components can flag they need
support (since it's too large to include everywhere). Add temporary
warnings for the old forms to ease transition.
Also, update test script to build without GELI on x86.
Sponsored by: Netflix
Rename LOADER_FIREWIRE_SUPPORT to MK_LOADER_FIREWIRE. Only build
libfirewire when this is "yes". Add note to updating. Fix build script
to build this for x86 so the option doesn't decay. sparc64 supports
ZFS, so also build it MK_ZFS=no.
Sponsored by: Netflix
LOADER_ZFS_SUPPORT is entirely used to select whether or not to
support ZFS in the loader. But it's not a user-servicable part (MK_ZFS
is what's used for that) Change it to the more conventional HAVE_ZFS
and move the ZFS support code into loader.mk. In addition, only build
ZFS libraries and boot loaders when ZFS is enabled.
Sponsored by: Netflix
LOADER_FDT_SUPPORT was used inconsistently in the tree. In some
places, it was used to control whether or not the user wanted FDT
included, and in other places it was a command to include
support. Remove it entirely. The former is now enabled -DWITH_FDT,
while the latter is controlled by Makefiles defining HAVE_FDT.
Supported by: Netflix
libfoo32 is only needed when compiling 32-bit libraries on native
64-bit architectures, and only when that 64-bit architecture needs
mixed 32-bit and 64-bit binaries.
Sponsored by: Netflix
Previously we passed tx packets to hardware via nicvf_tx_mbuf_locked
and then to the BPF tap, with a possibly invalid mbuf which would result
in a panic.
PR: 223600
Discussed with: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation, Packet.net (hardware)
As of r323063 boot1 printed out the path & device from which it was
loaded, but uboot's EFI implementation lacked some support, resulting in
a NULL pointer and a crash. Check for a NULL pointer and avoid
reporting (and storing in the environment) the device and path in this
case.
Submitted by: Zakary Nafziger <worldofzak@gmail.com>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13038
instead of asserting the condition.
The row index is directly supplied by userspace, the kernel must
handle invalid values.
Submitted by: pho
MFC after: 3 days
would attempt to re-allocate interrupts during a chip reset without
first de-allocating them. Doing that right is going to be tricky, so
just band-aid it for now so that a re-init doesn't guarantee a failure
due to resource re-use.
Reported by: gallatin
Sponsored by: Netflix
The hardware is capable of 2 requestor endianness modes for standard 8
byte atomics: BE (0x0) and host endianness (0x1). Read the supported
modes from hca atomic capabilities and configure HW to host endianness
mode if supported.
Sponsored by: Mellanox Technologies
MFC after: 1 week
efi_devpath_is_prefix() is currently returning values 0 or 1, which means
it really should return bool.
Additionally, use unsigned len, because we only get unsigned values from
DevicePathNodeLength().
the coming ibcore and mlx5ib updates in order to support traffic redirection
to so-called raw ethernet QPs.
Remove unused E-switch related routines and files while at it.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Set the IPOIB_FLAG_INITIALIZED on dev_open and clear it on dev_stop to
avoid a race between ipoib load and the underlying device driver.
The device module must dispatch the IB_EVENT_PORT_ACTIVE event before ipoib
module is loaded. Otherwise, the flush will fail since no one set the
IPOIB_FLAG_INITIALIZED.
Submitted by: Slava Shwartsman <slavash@mellanox.com>
Sponsored by: Mellanox Technologies
MFC after: 1 week
* Check TLB1 in all mapdev cases, in case the memattr matches an existing
mapping (doesn't need to be MAP_DEFAULT).
* Fix mapping where the starting address is not a multiple of the widest size
base. For instance, it will now properly map 0xffffef000, size 0x11000 using
2 TLB entries, basing it at 0x****f000, instead of 0x***00000.
MFC after: 2 weeks
Ever since r143063, machine/atomic.h requires cdefs.h. So, include it
first. Weak support: style(9) tells us to include cdefs.h first.
Argument against: since code that includes systm.h still compiles,
compilation units that include systm.h must already include cdefs.h. So, an
argument could be made that the cdefs.h include could just be removed
entirely. That is maybe a bigger change and not one I am interested in
bikeshedding.
Universe compiles.
Sponsored by: Dell EMC Isilon
This introduces a facility to EVENTHANDLER(9) for explicitly defining a
reference to an event handler list. This is useful since previously all
invokers of events had to do a locked traversal of the global list of
event handler lists in order to find the appropriate event handler list.
By keeping a pointer to the appropriate list an invoker can avoid this
traversal completely. The pointer is initialized with SYSINIT(9) during
the eventhandler stage. Users registering interest in events do not need
to know if the event is backed by such a list, since the list is added
to the global list of lists. As with lists that are not pre-defined it
is safe to register for the events before the list has been created.
This converts the process_* and thread_* events to using the new
facility, as these are events whose locked traversals end up showing up
significantly in ports build workflows (and presumably other workflows
with many short lived threads/procs). It may be advantageous to convert
other events to using the new facility.
The el_flags field is now unused, but leave it be so that this revision
can be MFC'd.
Reviewed by: bdrewery, markj, mjg
Approved by: rstone (mentor)
In collaboration with: ian
MFC after: 4 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12814
Else the IPv6 address matching might fail. This change adds support for both
embedded and non-embedded IPv6 scope IDs when passing a IPv6 link-local socket
address to RDMA. Prior to this change only global IPv6 addresses would work
with RDMA.
Sponsored by: Mellanox Technologies
MFC after: 1 week
1) Fail to resolve RDMA address if rtalloc1() returns the loopback
device, lo0, as the gateway interface. Currently RDMA loopback is
not supported.
2) Use ip_dev_find() and ip6_dev_find() to lookup network interfaces
with matching IPv4 and IPv6 addresses, respectivly.
3) In addr_resolve() make sure the "ifa" pointer is always set, also when
the "ifp" is NULL. Else a NULL pointer access might happen trying to
read from the "ifa" pointer later on.
4) In rdma_addr_find_dmac_by_grh() make sure the "bound_dev_if" field
gets set properly instead of passing the scope ID through the IPv6
socket address structure. This is more in line with upstream OFED
in Linux.
5) In rdma_addr_find_smac_by_sgid() there is no need to pass the
scope ID for IPv6. Either it is stored in the "bound_dev_if" field
or ip6_dev_find() will find the correct network device regardless
of the scope ID.
Sponsored by: Mellanox Technologies
MFC after: 1 week
illumos/illumos-gate@27295216542729521654https://www.illumos.org/issues/7531
I found that some buffers that could be L2ARC eligible are not flagged
such, leading to some performance impact. As a test I ran the same IO
workload 10 times in a raw. It is a metadata only workload (files
listing). l2arc_noprefetch=0.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: benrubson <ben.rubson@gmail.com>
MFC after: 8 days
illumos/illumos-gate@f37ae9a714f37ae9a714https://www.illumos.org/issues/8713
If we're creating a pool with version >= SPA_VERSION_DSL_SCRUB (v11) we need to
account for additional space needed by the origin dataset which will also be
snapshotted: "poolname"+"/"+"$ORIGIN"+"@"+"$ORIGIN".
Enforce this limit in pool_namecheck().
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 1 week
With the current state of the AENQ handlers in the ENA driver, only
implemented handlers should be indicated.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12872
Using only 1 descriptor on RX could be an issue, if system would be low
on resources and could not provide driver with large chunks of
contiguous memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12871
The device now provides driver with max available MTU value it
can handle.
The function setting MTU for the interface was simplified and reworked
to follow up this changes.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12870
The maximum number of io_cq was the same number as maximum io_sq
indicated by the device working in normal mode (without LLQ).
It is not always true, especially when LLQ is being enabled.
Fix it.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12869
The driver was printing out a lot of information upon failure, which
does not have to be interested for the user.
Changing logging level required to rebuild driver with proper flags. The
proper sysctl was added, so the level now can be changed dynamically
using bitmask.
Levels of printouts were adjusted to keep on mind end user instead of
debugging purposes.
More verbose messages were added to align the driver with the Linux.
Fix building error introduced by the r325506 by casting csum_flags to
uint64_t.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12868
Also keep the calculated vm_page_alloc_contig() flags in the variable
to not re-evaluate it on the loop iteration.
Noted by: alc
Sponsored by: The FreeBSD Foundation
This bug wasn't impacting anything, because both enums are indicating
the same value, but it could cause a problem on API change.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12867
The gcc compiler is more sensitive when variable is having an value
assigned, but it is not used anywhere further.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12866
The previous way of checking for DF was not valid.
When DF is enabled, the DF bit should be 1.
The original way of checking it was wrong in 2 ways: first of all, it
was not checking for single bit, secondly, it was checking for 0.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12865
Remove unused macros and fields - some of them were only initialized,
without further usage.
Implement minor style fixes and add required comments.
On the occasion add missing TX completion counter, which was existing,
but mistakenly remained unused.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12864
The situation, where part of the MSI-x was not configured properly, was
not properly handled. Now, the driver reduces number of queues to
reflect number of existing and properly configured MSI-x vectors.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12863
Few counters were imported from the Linux driver and never used,
because of differences between the Linux and FreeBSD APIs.
Queue stops and resumes are no longer supported by the driver and
counters were incremented indicating false events.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12862
The driver was using it in only few places, so the rest of the code
was covered with those statement.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12861
* Change all conditional checks in "if" statement to boolean expressions
* Initialize variables with too complex values outside the declaration
* Fix indentations
* Move code associated with sysctls to ena_sysctl.c file
* For consistency, remove unnecesary "return" from void functions
* Use if_getdrvflags() function instead of accesing variable directly
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12860
Some goto tags were renamed for consistency, and few error handling
routines were reworked.
The drbr_free() must be locked just in case code will change in the
future - for now, it should never be an issue, because drbr is being
flushed in the ena_down() call, and the lock is required only when there
are some mbufs inside.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12859
On heavy load, when interrupt handling routine was slowed down, there
could appear memory corruption, because resources were destroyed and
interrupt was still being handled.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12858
