Commit Graph

19 Commits

Author SHA1 Message Date
n_hibma
6a88b24ee2 Implement ucom_set_pnpinfo_usb() providing ttyname and port number
information through devd. My E220 now produces the notification (1 line):

	+u3g0 at bus=1 hubaddr=1 port=0 devaddr=2 interface=0 \
	vendor=0x12d1 product=0x1003 devclass=0x00 devsubclass=0x00 \
	sernum="" release=0x0000 intclass=0xff intsubclass=0xff \
	ttyname=U0 ttyports=2 on uhub0

Note: serial/ufoma and net/uhso still provide port number and tty name
(uhso only) information through sysctls, which should now be removed.

Reviewed by:	hpselasky
2010-11-05 19:12:48 +00:00
n_hibma
0850594b2b - Simplify the way unit/subunit allocation is done in ucom.
- hw.usb.ucom.cons_unit is now split into
  hw.usb.ucom.cons_unit/...cons_subunit.

Note: The tunable/sysctl hw.usb.ucom.cons_unit needs to be reviewed if

a) a console was defined a USB serial devices, and a USB device with
more than 1 subunit is present, and this device is attached before the
device functioning as a console

or

b) a console was defined on a USB device with more than 1 subunit

Reviewed by:	hps
MFC after:	2 weeks
2010-11-03 21:50:49 +00:00
thompsa
bb06251a3b Add missing MODULE_VERSION() definitions, this resolves problems around
duplicate module loads.

PR:		usb/125736
Submitted by:	danger, mm
Reviewed by:	hselasky
2010-09-01 23:47:53 +00:00
thompsa
6745662f29 Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.
2009-11-26 00:43:17 +00:00
thompsa
ab04ac3fe9 Add back endpoint swap detection that was disabled in an earlier driver
conversion.

Submitted by:	Hans Petter Selasky
2009-09-28 08:18:14 +00:00
thompsa
13d838412e Add experimental support for usb serial console and polled mode during DDB.
Submitted by:	Hans Petter Selasky
2009-09-28 08:13:50 +00:00
thompsa
74c6c20b93 - Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just   usb.h and usbdi.h
2009-06-23 02:19:59 +00:00
thompsa
06303d491a s/usb2_/usb_|usbd_/ on all function names for the USB stack. 2009-06-15 01:02:43 +00:00
thompsa
2d149b09c5 Rename usb pipes to endpoints as it better represents what they are, and struct
usb_pipe may be used for a different purpose later on.
2009-06-07 19:41:11 +00:00
thompsa
44c17bdf07 s/usb2_/usb_/ on all typedefs for the USB stack. 2009-05-29 18:46:57 +00:00
thompsa
af6fb4f3d2 s/usb2_/usb_/ on all C structs for the USB stack. 2009-05-28 17:36:36 +00:00
thompsa
7550aa99d0 Use the correct usb config number on attach.
Reported by:	Greg Rivers
Submitted by:	Hans Petter Selasky
2009-05-21 17:45:37 +00:00
thompsa
6493599dff - rename usb2_mode to usb_mode [1]
- change variable types to use the enum

Submitted by:	Hans Petter Selasky [1]
2009-05-21 00:04:17 +00:00
thompsa
f498dc2227 MFp4 //depot/projects/usb@159909
- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
  "usb2_config" has a new field called "usb_mode" which select for which mode
  the current xfer entry is active. Options are: a) Device mode only b) Host
  mode only (default-by-zero) c) Both modes.  This change was scripted using
  the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
  the code for the function uses less memory than the table itself.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:38 +00:00
thompsa
5dee97ce86 MFp4 //depot/projects/usb @159430
- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by:	Hans Petter Selasky
2009-03-20 19:04:31 +00:00
thompsa
9e91847c9e Rename the ushub device class back to uhub as it was in the old usb stack,
moused(8) looks for "uhub/ums" to decide if needs to load the module.

Reported by:	Garrett Cooper
2009-03-02 05:37:05 +00:00
thompsa
4613abf36a Move the serial drivers from Giant to using their own mutexs.
Tested with:	u3g, ubser, uplcom
2009-03-02 02:44:10 +00:00
ed
7db4b282f9 Also use proper capitalisation of FreeBSD in other source files.
Approved by:	thompsa
2009-02-24 17:15:29 +00:00
thompsa
111a707d99 Move the new USB stack into its new home. 2009-02-23 18:31:00 +00:00