- Hold the proc lock while changing the state from PRS_NEW to PRS_NORMAL
in fork to honor the locking requirements. While here, expand the scope
of the PROC_LOCK() on the new process (p2) to avoid some LORs. Previously
the code was locking the new child process (p2) after it had locked the
parent process (p1). However, when locking two processes, the safe order
is to lock the child first, then the parent.
- Fix various places that were checking p_state against PRS_NEW without
having the process locked to use PROC_LOCK(). Every place was already
locking the process, just after the PRS_NEW check.
- Remove or reduce the use of PROC_SLOCK() for places that were checking
p_state against PRS_NEW. The PROC_LOCK() alone is sufficient for reading
the current state.
- Reorder fill_kinfo_proc() slightly so it only acquires PROC_SLOCK() once.
MFC after: 1 week
file where they are used. Declare the kern.threads sysctl node at the
same location. Since no external use for the variables exists, make them
static.
Discussed with: dchagin
MFC after: 1 week
It is possible a lower priority thread lending priority to higher priority
thread, in old code, it is ignored, however the lending should always be
recorded, add field td_lend_user_pri to fix the problem, if a thread does
not have borrowed priority, its value is PRI_MAX.
MFC after: 1 week
- In thr_exit() and kthread_exit(), only remove thread from
hash if it can directly exit, otherwise let exit1() do it.
- In thread_suspend_check(), fix cleanup code when thread needs
to exit.
This change seems fixed the "Bad link elm " panic found by
Peter Holm.
Stress testing: pho
rwlock to protect the table. In old code, thread lookup is done with
process lock held, to find a thread, kernel has to iterate through
process and thread list, this is quite inefficient.
With this change, test shows in extreme case performance is
dramatically improved.
Earlier patch was reviewed by: jhb, julian
on exit, that is done once in thread_exit() and the second time in
proc_reap(), by clearing td_incruntime.
Use the opportunity to revert to the pre-RUSAGE_THREAD exporting of ruxagg()
instead of ruxagg_locked() and use it from thread_exit().
Diagnosed and tested by: neel
MFC after: 3 days
information for thread to allow calcru1() (re)use.
Rename ruxagg()->ruxagg_locked(), ruxagg_tlock()->ruxagg() [1].
The ruxagg_locked() function no longer clears thread ticks nor
td_incruntime.
Requested by: attilio [1]
Discussed with: attilio, bde
Reviewed by: bde
Based on submission by: Alexander Krizhanovsky <ak natsys-lab com>
MFC after: 1 week
X-MFC-Note: td_rux shall be moved to the end of struct thread
Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho (and retested according to new test scenarious)
MFC after: 1 week
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho
MFC after: 1 week
PCATCH, to indicate that thread shall not be stopped upon receipt of
SIGSTOP until it reaches the kernel->usermode boundary.
Also change thread_single(SINGLE_NO_EXIT) to only stop threads at
the user boundary unconditionally.
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
process that still need to be suspended or exited from thread_single
into the new function calc_remaining().
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
guarantee that all cpus have acknowledged the cleared enable int by
scheduling the resetting thread on each cpu in succession. Since all
lock profiling happens within a critical section this guarantees that
all cpus have left lock profiling before we clear the datastructures.
- Assert that the per-thread queue of locks lock profiling is aware of
is clear on thread exit. There were several cases where this was not
true that slows lock profiling and leaks information.
- Remove all objects from all lists before clearing any per-cpu
information in reset. Lock profiling objects can migrate between
per-cpu caches and previously these migrated objects could be zero'd
before they'd been removed
Discussed with: attilio
Sponsored by: Nokia
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
unnecessary, the normal process lock and thread lock are enough. The
spin lock is still needed for process and thread exiting to mimic
single sched_lock.
this eliminates some problems of locking, e.g, a thread lock is needed
but can not be used at that time. Only the process lock is needed now
for new field.
thread_unsuspend_one() needs to optionally wakeup the swapper. Since we
hold the thread lock for that entire function, however, we have to push
that requirement up into the caller.
Found by: rwatson
- Speedup the lock orderings lookup modifying the witness graph from a
linked tree to a matrix. A table lookup caches the lock orderings in
order to make a O(1) access for them. Any witness object has an unique
index withing this lookup cache table.
- Reduce the lock contention on w_mtx acquiring it only when the LOR
actually happens and not in a sane case. In order to do this don't totally
flush lock lists (per-CPU spinlocks list and per-thread sleeplocks list)
but check for ll_count anytime we need to have to verify allocations sanity.
- Introduce the function witness_thread_exit() in the witness namespace which
should verify a thread doesn't hold any witness occurrence why exiting.
- Rename the sysctl debug.witness.graphs into debug.witness.fullgraph and
add debug.witness.badstacks which prints out stacks for LOR revealed.
This is implemented using the stack(9) support, which makes WITNESS to be
dependent by the STACK option or by the DDB (including STACK) option.
- Fix style(9) for src/sys/kern/subr_witness.c
The hash table approach has been developed by Ilya Maykov on the behalf of
Isilon Systems which kindly released the patch.
Jeff Roberson, ported the patch to -CURRENT and fixed w_mtx contention, on the
behalf of Nokia.
Submitted by: Ilya Maykov <ivmaykov at gmail dot com> (Isilon Systems), jeff
Sponsored by: Nokia
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
variables and sysctl nodes.
- In reset walk the children of kern_sched_stats and reset the counters
via the oid_arg1 pointer. This allows us to add arbitrary counters to
the tree and still reset them properly.
- Define a set of switch types to be passed with flags to mi_switch().
These types are named SWT_*. These types correspond to SCHED_STATS
counters and are automatically handled in this way.
- Make the new SWT_ types more specific than the older switch stats.
There are now stats for idle switches, remote idle wakeups, remote
preemption ithreads idling, etc.
- Add switch statistics for ULE's pickcpu algorithm. These stats include
how much migration there is, how often affinity was successful, how
often threads were migrated to the local cpu on wakeup, etc.
Sponsored by: Nokia
to enter thread_suspend_check().
- Set TDF_ASTPENDING along with TDF_NEEDSUSPCHK so we can move the
thread_suspend_check() to ast() rather than userret().
- Check TDF_NEEDSUSPCHK in the sleepq_catch_signals() optimization so
that we don't miss a suspend request. If this is set use the
expensive signal path.
- Set NEEDSUSPCHK when creating a new thread in thr in case the
creating thread is due to be suspended as well but has not yet.
Reviewed by: davidxu (Authored original patch)
thread_fini(). The schedulers initialize themselves properly during
sched_fork_thread() anyhow. fini is only called when we're returning
the memory to the allocator which surely doesn't care what state the
memory is in.
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential. Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
sched_sleep(). This removes extra thread_lock() acquisition and
allows the scheduler to decide what to do with the static boost.
- Change the priority arguments to cv_* to match sleepq/msleep/etc.
where 0 means no priority change. Catch -1 in cv_broadcastpri() and
convert it to 0 for now.
- Set a flag when sleeping in a way that is compatible with swapping
since direct priority comparisons are meaningless now.
- Add a sysctl to ule, kern.sched.static_boost, that defaults to on which
controls the boost behavior. Turning it off gives better performance
in some workloads but needs more investigation.
- While we're modifying sleepq, change signal and broadcast to both
return with the lock held as the lock was held on enter.
Reviewed by: jhb, peter
and assignment.
- Add a reference to a struct cpuset in each thread that is inherited from
the thread that created it.
- Release the reference when the thread is destroyed.
- Add prototypes for syscalls and macros for manipulating cpusets in
sys/cpuset.h
- Add syscalls to create, get, and set new numbered cpusets:
cpuset(), cpuset_{get,set}id()
- Add syscalls for getting and setting affinity masks for cpusets or
individual threads: cpuid_{get,set}affinity()
- Add types for the 'level' and 'which' parameters for the cpuset. This
will permit expansion of the api to cover cpu masks for other objects
identifiable with an id_t integer. For example, IRQs and Jails may be
coming soon.
- The root set 0 contains all valid cpus. All thread initially belong to
cpuset 1. This permits migrating all threads off of certain cpus to
reserve them for special applications.
Sponsored by: Nokia
Discussed with: arch, rwatson, brooks, davidxu, deischen
Reviewed by: antoine
details from consumers.
- Track individual selecters on a per-descriptor basis such that there
are no longer collisions and after sleeping for events only those
descriptors which triggered events must be rescaned.
- Protect the selinfo (per descriptor) structure with a mtx pool mutex.
mtx pool mutexes were chosen to preserve api compatibility with
existing code which does nothing but bzero() to setup selinfo
structures.
- Use a per-thread wait channel rather than a global wait channel.
- Hide select implementation details in a seltd structure which is
opaque to the rest of the kernel.
- Provide a 'selsocket' interface for those kernel consumers who wish to
select on a socket when they have no fd so they no longer have to
be aware of select implementation details.
Tested by: kris
Reviewed on: arch
the ABI when enabled. There is no longer an embedded lock_profile_object
in each lock. Instead a list of lock_profile_objects is kept per-thread
for each lock it may own. The cnt_hold statistic is now always 0 to
facilitate this.
- Support shared locking by tracking individual lock instances and
statistics in the per-thread per-instance lock_profile_object.
- Make the lock profiling hash table a per-cpu singly linked list with a
per-cpu static lock_prof allocator. This removes the need for an array
of spinlocks and reduces cache contention between cores.
- Use a seperate hash for spinlocks and other locks so that only a
critical_enter() is required and not a spinlock_enter() to modify the
per-cpu tables.
- Count time spent spinning in the lock statistics.
- Remove the LOCK_PROFILE_SHARED option as it is always supported now.
- Specifically drop and release the scheduler locks in both schedulers
since we track owners now.
In collaboration with: Kip Macy
Sponsored by: Nokia
process_fini, thread_ctor, thread_dtor, thread_init, thread_fini. This
will allow us to extend dynamically areas in proc/thread for dtrace ;-)
Reviewed by: rwatson
communicate that it relates to (is called by) thread_alloc()
o Add cpu_thread_free() which is called from thread_free()
to counter-act cpu_thread_alloc().
i386: Have cpu_thread_free() call cpu_thread_clean() to
preserve behaviour.
ia64: Have cpu_thread_free() call mtx_destroy() for the
mutex initialized in cpu_thread_alloc().
PR: ia64/118024
silent NULL pointer dereference in the i386 and sparc64 pmap_pinit()
when the kmem_alloc_nofault() failed to allocate address space. Both
functions now return error instead of panicing or dereferencing NULL.
As consequence, vmspace_exec() and vmspace_unshare() returns the errno
int. struct vmspace arg was added to vm_forkproc() to avoid dealing
with failed allocation when most of the fork1() job is already done.
The kernel stack for the thread is now set up in the thread_alloc(),
that itself may return NULL. Also, allocation of the first process
thread is performed in the fork1() to properly deal with stack
allocation failure. proc_linkup() is separated into proc_linkup()
called from fork1(), and proc_linkup0(), that is used to set up the
kernel process (was known as swapper).
In collaboration with: Peter Holm
Reviewed by: jhb
kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.
kproc_kthread_add() takes the parameters for kthread_add,
plus a process name and a pointer to a pointer to a process instead of just
a pointer, and if the proc * is NULL, it creates the process to the
specifications required, before adding the thread to it.
All other old kthread_xxx() calls return, but act on (struct thread *)
instead of (struct proc *). One reason to change the name is so that
any old kernel modules that are lying around and expect kthread_create()
to make a process will not just accidentally link.
fix top to show kernel threads by their thread name in -SH mode
add a tdnam formatting option to ps to show thread names.
make all idle threads actual kthreads and put them into their own idled process.
make all interrupt threads kthreads and put them in an interd process
(mainly for aesthetic and accounting reasons)
rename proc 0 to be 'kernel' and it's swapper thread is now 'swapper'
man page fixes to follow.
In particular:
- smp_tlb_mtx is no longer used, so it is axed.
- smp rendezvous lock isn't really a leaf spin-mutex. Its bad placement in
the table, however, has been the source of a false positive LOR reporting
with the dt_lock. However, smp rendezvous lock would have had sched_lock
there for older lock, so it wasn't still a leaf lock.
- allpmaps is only used in ia32 architecture, so it is inserted in the
appropriate stub.
Addictionally:
- kse_zombie_lock is no longer present, so its definition is axed out.
- zombie_lock doesn't need to have an exported symbol, so just let's it be
declared as static.
Tested by: kris
Approved by: jeff (mentor)
Approved by: re
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
