that redzone adds to the allocation for storing its metadata is at least as
large as the metadata that it will store there.
Submitted by: Nima Misaghian
routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
to downgrade the exclusive lock to shared one when exclusive lock owner
requested shared lock. New lockmgr panics instead.
The vnode_pager_lock function requests shared lock on the vnode backing
the OBJT_VNODE, and can be called when the current thread already holds
an exlcusive lock on the vnode. For instance, it happens when handling
page fault from the VOP_WRITE() uiomove that writes to the file, with
the faulted in page fetched from the vm object backed by the same file.
We then get the situation described above.
Verify whether the vnode is already exclusively locked by the curthread
and request recursed exclusive vnode lock instead of shared, if true.
Reported by: gallatin
Discussed with: attilio
for the bio for swapout write. It allows the page allocator to drain
free page list deeper. As result, a deadlock where pageout deamon sleeps
waiting for bio to be allocated for swapout is no more reproducable in
practice.
Alan said that M_USE_RESERVE shall be ressurrected and used there, but
until this is implemented, M_NOWAIT does exactly what is needed.
Tested by: pho, kris
Reviewed by: alc
No objections from: phk
MFC after: 2 weeks (RELENG_7 only)
on the amd64 architecture. The amd64 architecture requires kernel code and
global variables to reside in the highest 2GB of the 64-bit virtual address
space. Thus, the memory allocated during bootstrap, before the call to
kmem_init(), starts at KERNBASE, which is not necessarily the same as
VM_MIN_KERNEL_ADDRESS on amd64.
PowerPC/AIM. Consequently, it should not be used to determine the maximum
number of kernel map entries. Intead, use VM_MIN_KERNEL_ADDRESS, which marks
the start of the kernel map on all architectures.
Tested by: marcel@ (PowerPC/AIM)
work. (Moreover, I don't believe that they have ever worked as intended.)
The explanation is fairly simple. Both MADV_DONTNEED and MADV_FREE perform
vm_page_dontneed() on each page within the range given to madvise(). This
function moves the page to the inactive queue. Specifically, if the page is
clean, it is moved to the head of the inactive queue where it is first in
line for processing by the page daemon. On the other hand, if it is dirty,
it is placed at the tail. Let's further examine the case in which the page
is clean. Recall that the page is at the head of the line for processing by
the page daemon. The expectation of vm_page_dontneed()'s author was that
the page would be transferred from the inactive queue to the cache queue by
the page daemon. (Once the page is in the cache queue, it is, in effect,
free, that is, it can be reallocated to a new vm object by vm_page_alloc()
if it isn't reactivated quickly enough by a user of the old vm object.) The
trouble is that nowhere in the execution of either MADV_DONTNEED or
MADV_FREE is either the machine-independent reference flag (PG_REFERENCED)
or the reference bit in any page table entry (PTE) mapping the page cleared.
Consequently, the immediate reaction of the page daemon is to reactivate the
page because it is referenced. In effect, the madvise() was for naught.
The case in which the page was dirty is not too different. Instead of being
laundered, the page is reactivated.
Note: The essential difference between MADV_DONTNEED and MADV_FREE is
that MADV_FREE clears a page's dirty field. So, MADV_FREE is always
executing the clean case above.
This revision changes vm_page_dontneed() to clear both the machine-
independent reference flag (PG_REFERENCED) and the reference bit in all PTEs
mapping the page.
MFC after: 6 weeks
entirety of the specified range be mapped. Specifically, it has
returned EINVAL if the entire range is not mapped. There is not,
however, any basis for this in either SuSv2 or our own man page.
Moreover, neither Linux nor Solaris impose this requirement. This
revision removes this requirement.
Submitted by: Tijl Coosemans
PR: 118510
MFC after: 6 weeks
Directory IO without a VM object will store data in 'malloced' buffers
severely limiting caching of the data. Without this change VM objects for
directories are only created on an open() of the directory.
TODO: Inline test if VM object already exists to avoid locking/function call
overhead.
Tested by: kris@
Reviewed by: jeff@
Reported by: David Filo
superpage-aligned virtual address for the mapping. Revision 1.65
implemented an overly simplistic and generally ineffectual method for
finding a superpage-aligned virtual address. Specifically, it rounds
the virtual address corresponding to the end of the data segment up to
the next superpage-aligned virtual address. If this virtual address
is unallocated, then the device will be mapped using superpages.
Unfortunately, in modern times, where applications like the X server
dynamically load much of their code, this virtual address is already
allocated. In such cases, mmap(2) simply uses the first available
virtual address, which is not necessarily superpage aligned.
This revision changes mmap(2) to use a more robust method,
specifically, the VMFS_ALIGNED_SPACE option that is now implemented by
vm_map_find().
physical address of the device's memory. This enables
pmap_align_superpage() to propose a virtual address for mapping the
device memory that permits the use of superpage mappings.
used to request superpage alignment for the submap.
Request superpage alignment for the kmem_map.
Pass VMFS_ANY_SPACE instead of TRUE to vm_map_find(). (They are currently
equivalent but VMFS_ANY_SPACE is the new preferred spelling.)
Remove a stale comment from kmem_malloc().
support for VMFS_ALIGNED_SPACE, which requests the allocation of an
address range best suited to superpages. The old options TRUE and FALSE
are mapped to VMFS_ANY_SPACE and VMFS_NO_SPACE, so that there is no
immediate need to update all of vm_map_find(9)'s callers.
While I'm here, correct a misstatement about vm_map_find(9)'s return
values in the man page.
variables and sysctl nodes.
- In reset walk the children of kern_sched_stats and reset the counters
via the oid_arg1 pointer. This allows us to add arbitrary counters to
the tree and still reset them properly.
- Define a set of switch types to be passed with flags to mi_switch().
These types are named SWT_*. These types correspond to SCHED_STATS
counters and are automatically handled in this way.
- Make the new SWT_ types more specific than the older switch stats.
There are now stats for idle switches, remote idle wakeups, remote
preemption ithreads idling, etc.
- Add switch statistics for ULE's pickcpu algorithm. These stats include
how much migration there is, how often affinity was successful, how
often threads were migrated to the local cpu on wakeup, etc.
Sponsored by: Nokia
contigmalloc(9) as a last resort to steal pages from an inactive,
partially-used superpage reservation.
Rename vm_reserv_reclaim() to vm_reserv_reclaim_inactive() and
refactor it so that a separate subroutine is responsible for breaking
the selected reservation. This subroutine is also used by
vm_reserv_reclaim_contig().
UMA_SLAB_KERNEL for consistency with its sibling UMA_SLAB_KMEM.
(UMA_SLAB_KMAP met its original demise in revision 1.30 of
vm/uma_core.c.) UMA_SLAB_KERNEL is now required by the jumbo frame
allocators. Without it, UMA cannot correctly return pages from the
jumbo frame zones to the VM system because it resets the pages' object
field to NULL instead of the kernel object. In more detail, the jumbo
frame zones are created with the option UMA_ZONE_REFCNT. This causes
UMA to overwrite the pages' object field with the address of the slab.
However, when UMA wants to release these pages, it doesn't know how to
restore the object field, so it sets it to NULL. This change teaches
UMA how to reset the object field to the kernel object.
Crashes reported by: kris
Fix tested by: kris
Fix discussed with: jeff
MFC after: 6 weeks
vm_object_reference(). This is intended to get rid of vget()
consumers who don't wish to acquire a lock. This is functionally
the same as calling vref(). vm_object_reference_locked() already
uses vref.
Discussed with: alc
obtain the reference. In particular, this fixes the panic reported in
the PR. Remove the comments stating that this needs to be done.
PR: kern/119422
MFC after: 1 week
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
vm/vm_contig.c, vm/vm_page.c, and vm/vm_pageq.c. Today, vm/vm_pageq.c
has withered to the point that it contains only four short functions,
two of which are only used by vm/vm_page.c. Since I can't foresee any
reason for vm/vm_pageq.c to grow, it is time to fold the remaining
contents of vm/vm_pageq.c back into vm/vm_page.c.
Add some comments. Rename one of the functions, vm_pageq_enqueue(),
that is now static within vm/vm_page.c to vm_page_enqueue().
Eliminate PQ_MAXCOUNT as it no longer serves any purpose.
Instead of checking each page for PG_UNMANAGED, perform a one-time
check whether the object is OBJT_PHYS. (PG_UNMANAGED pages only
belong to OBJT_PHYS objects.)
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential. Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
sched_sleep(). This removes extra thread_lock() acquisition and
allows the scheduler to decide what to do with the static boost.
- Change the priority arguments to cv_* to match sleepq/msleep/etc.
where 0 means no priority change. Catch -1 in cv_broadcastpri() and
convert it to 0 for now.
- Set a flag when sleeping in a way that is compatible with swapping
since direct priority comparisons are meaningless now.
- Add a sysctl to ule, kern.sched.static_boost, that defaults to on which
controls the boost behavior. Turning it off gives better performance
in some workloads but needs more investigation.
- While we're modifying sleepq, change signal and broadcast to both
return with the lock held as the lock was held on enter.
Reviewed by: jhb, peter
Specifically, since the delete-behind heuristic is never applied to a
device-backed object, there is no point in checking whether each of the
object's pages is fictitious. (Only device-backed objects have
fictitious pages.)
structure. This allows per-CPU variations of struct pmap on a
single architecture without affecting the machine-independent
fields. As such, the PMAP variations don't affect the ABI. They
become part of it.
pmap_remove_all() must not be called on fictitious pages. To date,
fictitious pages have been allocated from zeroed memory, effectively
hiding this problem because the fictitious pages appear to have an empty
pv list. Submitted by: Kostik Belousov
Rewrite the comments describing vm_object_page_remove() to better
describe what it does. Add an assertion. Reviewed by: Kostik Belousov
MFC after: 1 week
