mostly used on 80x25 displays, and the actual window is about ten
characters narrower than that, resulting in the need for horizontal
scrolling. No functional change.
RELENG_5_2 candidate.
needed to be statically populated with device nodes. The first two are no
longer true, which makes the third pretty moot. In fact, we don't seem to
put device node bits into the distribution archives at all anymore.
So..... remove the god-aweful nasty hack that force unmounted devfs during
installation so that static device nodes could land in /dev. Now that the
vnode cleaner handles this case better this isn't strictly needed, but
axeing code in sysinstall is almost always benficial. Thanks to Don Lewis
for pointing out this attribute of sysinstall.
the case where there's an entry in the manufacturer's device list but
no corresponding installation section (and hence no AddReg assignments),
i.e. if dev = find_assign(sname, "AddReg"); returns NULL, then
don't try to dereference dev.
There is a fundamental problem with the handling of .INF files that
contain definitions for multiple devices: right now we dump all the
AddReg sections that we find, but don't distinguish what device they
belong to. This often results in duplicate keys.
Yes, it's what you think it is. Yes, you should run away now.
This is a special compatibility module for allowing Windows NDIS
miniport network drivers to be used with FreeBSD/x86. This provides
_binary_ NDIS compatibility (not source): you can run NDIS driver
code, but you can't build it. There are three main parts:
sys/compat/ndis: the NDIS compat API, which provides binary
compatibility functions for many routines in NDIS.SYS, HAL.dll
and ntoskrnl.exe in Windows (these are the three modules that
most NDIS miniport drivers use). The compat module also contains
a small PE relocator/dynalinker which relocates the Windows .SYS
image and then patches in our native routines.
sys/dev/if_ndis: the if_ndis driver wrapper. This module makes
use of the ndis compat API and can be compiled with a specially
prepared binary image file (ndis_driver_data.h) containing the
Windows .SYS image and registry key information parsed out of the
accompanying .INF file. Once if_ndis.ko is built, it can be loaded
and unloaded just like a native FreeBSD kenrel module.
usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf
into an ndis_driver_data.h file that can be compiled into if_ndis.o.
Contains an .inf file parser graciously provided by Matt Dodd (and
mercilessly hacked upon by me) that strips out device ID info and
registry key info from a .INF file and packages it up with a binary
image array. The ndiscvt(8) utility also does some manipulation of
the segments within the .sys file to make life easier for the kernel
loader. (Doing the manipulation here saves the kernel code from having
to move things around later, which would waste memory.)
ndiscvt is only built for the i386 arch. Only files.i386 has been
updated, and none of this is turned on in GENERIC. It should probably
work on pc98. I have no idea about amd64 or ia64 at this point.
This is still a work in progress. I estimate it's about %85 done, but
I want it under CVS control so I can track subsequent changes. It has
been tested with exactly three drivers: the LinkSys LNE100TX v4 driver
(Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK
(e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It
still needs to have a net80211 stuff added to it. To use it, you would
do something like this:
# cd /sys/modules/ndis
# make; make load
# cd /sys/modules/if_ndis
# ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h
# make; make load
# sysctl -a | grep ndis
All registry keys are mapped to sysctl nodes. Sometimes drivers refer
to registry keys that aren't mentioned in foo.inf. If this happens,
the NDIS API module creates sysctl nodes for these keys on the fly so
you can tweak them.
An example usage of the Broadcom wireless driver would be:
# sysctl hw.ndis0.EnableAutoConnect=1
# sysctl hw.ndis0.SSID="MY_SSID"
# sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc)
# ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up
Things to be done:
- get rid of debug messages
- add in ndis80211 support
- defer transmissions until after a status update with
NDIS_STATUS_CONNECTED occurs
- Create smarter lookaside list support
- Split off if_ndis_pci.c and if_ndis_pccard.c attachments
- Make sure PCMCIA support works
- Fix ndiscvt to properly parse PCMCIA device IDs from INF files
- write ndisapi.9 man page
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
such that 'ispcvt' can build. Unforunately 'ispcvt' is needed in order for
/etc/rc.d/syscons to run. This fixes the bug where I could not get my
keymap effective at boot.
it returns. This allows it to connect to the server side again, which
has been listening on IPv6 addresses exclusively for more than 2 years.
PR: 59369
(Lite Edition) respectively. These "lite" packages are streamlined to
provide users with the core essentials for each desktop and to fit on the
release disc 1.
Approved by: re (scottl)
permitting the administrator to select a securelevel top operate
at. Include a helpfile summarizing some of the information from
init(8). This allows for explicit configuration of securelevels,
which was previously implicit in Security Profile selection.
Currently, there are no checkboxes for the active securelevel,
because sysinstall's facilities for deriving "current settings"
from rc.conf may use only one variable, not two, and I opted for
the simplest approach at this point.
Approved by: re (scottl)
selection is used to drive two configuration parameters:
(1) Default enable/disable for sshd
(2) Default enable/disable for securelevels
Replace this with an explicit choice to enable/disable sshd. A
follow-up commit will add a configuration option to the Security
post-install configuration menu to set the securelevel in rc.conf
explicitly. This should reduce the level of foot-shooting associated
with accidental enabling of securelevels, make the nature and
implications of the securelevel configuration options more explicit,
as well as make the choice to enable/disable sshd more explicit.
Approved by: re (scottl)
(1) Document the notion of using jail(8) to run "virtual servers" or
just to constrain specific applications. If only running specific
applications, some configuration steps are unnecessary (such as
editing rc.conf).
(2) Add some more subsection headers to break up the bigger chunks of
text.
(3) Clarify the problems associated with applications binding all IP
addresses in the host, and attempt to be more specific about
potential application problems. Document how to force sshd to
bind the the right socket.
(4) Suggest that in a jailed application scenario, you might want to
have the host syslogd listen on the socket in the jail, rather
than running syslogd in the jail.
(5) Catch another reference to /stand/sysinstall.
Approved by: re (bmah implicitly)
check if it's already loaded or compiled into the kernel, and only try to
load it if it isn't.
PR: bin/59368
Submitted by: Jens Rehsack <rehsack@liwing.de>
is possible for an error to occur while trying to log an error, and
this can result in infinite recursion (or at least until we run out
of stack).
Rather than this, we ignore requests to log an error while logging an
error.
PR: 51253
MFC after: 2 weeks
Avoid implicit function calls by adding the proper include files.
Use const char copyright.
Fix some fprint formatting.
In the manual page:
Use the .Pa macro for filenames and locations.
Kill hard setence breaks.
Make use of the .Tn and .Dq macros.
Add some to text to the otherwise blank HISTORY section (taken from CVS).
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.
- simplify by strdup.
- set ai_protocol in hints to TCP.
- g/c FAITH_NS (no description, not maintained for years)
- warn if connection from IPv4 mapped is reached.
- IPV6_V6ONLY if possible.
- unifdef -UFAITH4.
- drop rsh/rlogin support.
- deal with negative return value from wait3.
Obtained from: KAME
- realloc pedant.
- set sin6_scope_id before sending (link-local/multicast) packets
- removed an incorrect comment
- don't age non-gateway host routes.
- not remove global addresses on loopback interface from routing table
by route aging.
Obtained from: KAME
a SEMICOLON token (a newline or semicolon, or one of these preceded
by a comment and/or whitespace). The input stream was switched too
early and the parser was expecting a SEMICOLON in the included file
instead of after the filename in the include directive.
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Kept alive by: Adam C. Migus <adam@migus.org>
ums module, and allow for up to five attempts to open the device, with
two-second pauses in between, to allow time for USB controllers and
devices to probe and attach. My Gigabyte P4 Titan 848P motherboard has
a total of 15 ports on four hubs hanging off four controllers, and needs
at least half of that ten-second allowance to get ready.
MFC after: 7 days
deraadt NOTE: -I needs to take an arg (there's no way we can take no
arg/an arg with a single option)
- sscanf overrun
- no variable name on prototype.
- u_int32_t may not be u_long.
- skipped non-host route when printing neighbor cache entries.
- valid and preferred lifetimes are unsigned.
- wording.
Obtained from: KAME
