completes the move to a fully parallel UDP transmit path by using
global read, rather than write, locking of inpcbinfo in further
semi-connected cases:
- Add macros to allow try-locking of inpcb and inpcbinfo.
- Always acquire an incpcb read lock in udp_output(), which stablizes the
local inpcb address and port bindings in order to determine what further
locking is required:
- If the inpcb is currently not bound (at all) and are implicitly
connecting, we require inpcbinfo and inpcb write locks, so drop the
read lock and re-acquire.
- If the inpcb is bound for at least one of the port or address, but an
explicit source or destination is requested, trylock the inpcbinfo
lock, and if that fails, drop the inpcb lock, lock the global lock,
and relock the inpcb lock.
- Otherwise, no further locking is required (common case).
- Update comments.
In practice, this means that the vast majority of consumers of UDP sockets
will not acquire any exclusive locks at the socket or UDP levels of the
network stack. This leads to a marked performance improvement in several
important workloads, including BIND, nsd, and memcached over UDP, as well
as significant improvements in pps microbenchmarks.
The plan is to MFC all of the rwlock changes to RELENG_7 once they have
settled for a weeks in the tree.
Tested by: ps, kris (older revision), bde
MFC after: 3 weeks
This change removes the requirement that an ACL contain no ACL_USER
entries with a uid the same as those of a file, or ACL_GROUP entries
with a gid the same as those of a file. This requirement is not in the
specification, and not enforced by the kernel's ACL implementation.
Reported by: Iustin Pop <iusty at k1024 dot org>
MFC after: 1 week
The uart(4) driver has the advantage of supporting a wider variety of
hardware on a greater amount of platforms. This driver has already been
the standard on platforms such as ia64, powerpc and sparc64.
I've decided not to change anything on pc98. I'd rather let people from
the pc98 team look at this.
Approved by: philip (mentor), marcel
set MNT_UPDATE in fsflags, and delete the
"update" option from the global mount options.
MNT_UPDATE is a command, and not a property of a mount
that should persist after the command is executed.
We need to do similar things for MNT_FORCE and MNT_RELOAD.
All mount flags are prefixed by MNT_..... it would
be nice if flags which were commands were named differently
from flags which are persistent properties of a mount.
This was not such a big deal in the pre-nmount() days,
but with nmount() it is more important.
Requested by: yar
MFC after: 2 weeks
Give a better example if a user absolutely must use this option, and
suggest they pick something from the ephemeral port range rather than
port 53. This means that the example will not work if it is merely
uncommented, but this will hopefully encourage users to read the comment.
the patch from ISC for lib/bind9/check.c and deletion of unused
files in lib/bind.
This version will by default randomize the UDP query source port
(and sequence number of course) for every query.
In order to take advantage of this randomization users MUST have an
appropriate firewall configuration to allow UDP queries to be sent and
answers to be received on random ports; and users MUST NOT specify a
port number using the query-source[-v6] options.
The avoid-v[46]-udp-ports options exist for users who wish to eliminate
certain port numbers from being chosen by named for this purpose. See
the ARM Chatper 6 for more information.
Also please note, this issue applies only to UDP query ports. A random
ephemeral port is always chosen for TCP queries.
This issue applies primarily to name servers whose main purpose is to
resolve random queries (sometimes referred to as "caching" servers, or
more properly as "resolving" servers), although even an "authoritative"
name server will make some queries, primarily at startup time.
All users of BIND are strongly encouraged to upgrade to the latest
version, and to utilize the source port randomization feature.
This update addresses issues raised in:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-1447http://www.kb.cert.org/vuls/id/800113http://tools.ietf.org/html/draft-ietf-dnsext-forgery-resilience
1. The FreeBSD driver was setting an interrupt coalesce delay of 1000us
for reasons that I can only speculate on. This was hurting everything
from lame sequential I/O "benchmarks" to legitimate filesystem metadata
operations that relied on serialized barrier writes. One of my
filesystem tests went from 35s to complete down to 6s.
2. Implemented the Performant transport method. Without the fix in
(1), I saw almost no difference. With it, my filesystem tests showed
another 5-10% improvement in speed. It was hard to measure CPU
utilization in any meaningful way, so it's not clear if there was a
benefit there, though there should have been since the interrupt handler
was reduced from 2 or more PCI reads down to 1.
3. Implemented MSI-X. Without any docs on this, I was just taking a
guess, and it appears to only work with the Performant method. This
could be a programming or understanding mistake on my part. While this
by itself made almost no difference to performance since the Performant
method already eliminated most of the synchronous reads over the PCI
bus, it did allow the CISS hardware to stop sharing its interrupt with
the USB hardware, which in turn allowed the driver to become decoupled
from the Giant-locked USB driver stack. This increased performance by
almost 20%. The MSI-X setup was done with 4 vectors allocated, but only
1 vector used since the performant method was told to only use 1 of 4
queues. Fiddling with this might make it work with the simpleq method,
not sure. I did not implement MSI since I have no MSI-specific hardware
in my test lab.
4. Improved the locking in the driver, trimmed some data structures.
This didn't improve test times in any measurable way, but it does look
like it gave a minor improvement to CPU usage when many
processes/threads were doing I/O in parallel. Again, this was hard to
accurately test.
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no visible changes unless the device is
broken (or really old).
MFC after: 3 months
for the bio for swapout write. It allows the page allocator to drain
free page list deeper. As result, a deadlock where pageout deamon sleeps
waiting for bio to be allocated for swapout is no more reproducable in
practice.
Alan said that M_USE_RESERVE shall be ressurrected and used there, but
until this is implemented, M_NOWAIT does exactly what is needed.
Tested by: pho, kris
Reviewed by: alc
No objections from: phk
MFC after: 2 weeks (RELENG_7 only)
SI_ALIAS flag and initialization of the si_parent when alias is created.
Assert that supplied parent device is not NULL.
Both situations could cause NULL dereference in the
devfs_populate_loop() when creating a symlink for SI_ALIAS'ed device.
Namely, cdp->cdp_c.si_parent may be NULL.
Reported by: mav
MFC after: 2 weeks
As a result, those arguments must be recombined before calling the real
syscal implementation. This change fixes 32-bit compatibility for
cpuset_getid(), cpuset_setid(), cpuset_getaffinity(), and
cpuset_setaffinity().
udp_output() so that argument validation occurs before jail processing.
Add additional comments explaining what's going on when we process
addresses and binding during udp_output().
MFC after: 3 weeks
