The tcsh 6.14 uses libiconv to convert catalogs to appropriate charset
dynamically. However, we don't have libiconv in our tree. So, I made
some hack to load libiconv dynamically. If libiconv is available, you
can use catalogs for more locales than the locales which catalog is
actually installed.
To use this feature, you need to symlink catalogs to appropriate
locales. You can do this by installing ports/shells/tcsh_nls.
Reviewed by: arch (no objection)
MFC after: 1 week
automatically it is possible wait4(2) returns -1 and sets
errno = ECHILD if there were forked children. A user can
set such signal handler e.g. via ``trap "" 20'', see a PR
for the test case. Deal with this case and mark a job as
JOBDONE.
PR: bin/90334
Submitted by: bde
MFC after: 4 weeks
This makes a difference for the trap builtin, where after "trap '' 0" we
printed "trap -- quit". This is wrong, because an empty action means to reset
the action to the default. A side effect of this commit is that empty
variables are now printed as "variable=''" instead of just "variable=".
itself and its children. Instead of calling times() (as implied by POSIX) this
implementation directly calls getrusage() to get the times because this is more
convenient.
files is too much and hard to follow. Instead, make the -I option
just mean "do not automatically set -A for root". That is, if -A
is explicitly set, -I is ignored. Also, document -I in usage().
(The ls.c diff is better viewed relative to rev. 1.80.)
No objection: mux
Silence from: mnag
MFC after: 3 days
set +o can be used to reload previous settings, for this to work disabled
options must be printed as well or otherwise options that were set in the mean
time won't be turned off.
To avoid an excessively long output line I formatted the output to print only
six options per line.
Submitted by: Jilles Tjoelker
PR: 73500
ckrealloc and ckfree (added), respectively. sh jumps out of the signal handler
using longjmp which is obviously a bad idea during malloc calls.
Note: I think there is still a small race here because volatile sig_atomic_t
only guarantees atomic reads and writes while we're doing increments and
decrements.
Protect a setmode call with INT{ON,OFF} as it calls malloc internally.
PR: 45478
Patch from: Nate Eldredge
earlier, and more gracefully. Previously, this combination would be
ignored early in the code where permissions are tested and fail later
with a very unhelpful "permission denied" error.
Instead, test for this flag in the same block that generates the
"override?" messages for read-only files, but instead of trying
to guess what the user has in mind, generate an error and exit.
Update the man page to reflect this new behavior.
Not objected to by: freebsd-hackers@
termination with set -e if a command fails in a loop body inside a function
with an explicitely tested exit status, eg
f() {
for i in 1 2 3; do
false
done
}
f || true
Briefly reviewed by: cracauer
two cases of unwanted termination with set -e:
* if-commands containing several commands separated by semicolons, eg
if false; false; then [...]
* functions with an explicitely tested exit status that contain a failing
command which is not the last one, eg
f() {
false
false
}
f || true
PR: 77067, 85267
Briefly reviewed by: cracauer
and linting procedure:
1. Remove useless sub-expression:
- if (*start || (!ifsspc && start > string && (nulonly || 1))) {
+ if (*start || (!ifsspc && start > string)) {
The sub-expression "(nulonly || 1)" always evaluates to true and
according to CVS logs seems to be just a left-over from some
debugging and introduced by accident. Removing the sub-expression
doesn't change semantics and a code inspection showed that the
variable "nulonly" is also not necessary here in any way (and the
expression would require fixing instead of removing).
2. Remove dead code:
- if (backslash && c == '\\') {
- if (read(STDIN_FILENO, &c, 1) != 1) {
- status = 1;
- break;
- }
- STPUTC(c, p);
- } else if (ap[1] != NULL && strchr(ifs, c) != NULL) {
+ if (ap[1] != NULL && strchr(ifs, c) != NULL) {
Inspection of the control and data flow showed that variable
"backslash" is always false (0) when the "if"-expression is
evaluated, hence the whole block is effectively dead code.
Additionally, the skipping of characters after a backslash is already
performed correctly a few lines above, so this code is also not
needed at all. According to the CVS logs and the ASH 0.2 sources,
this code existed in this way already since its early days.
3. Cleanup Style:
- ! trap[signo][0] == '\0' &&
+ ! (trap[signo][0] == '\0') &&
The expression wants to ensure the trap is not assigned the empty
string. But the "!" operator has higher precedence than "==", so the
comparison should be put into parenthesis to form the intended way of
expression. Nevertheless the code was effectively not really broken
as both particular NUL comparisons are semantically equal, of course.
But the parenthesized version is a lot more intuitive.
4. Remove shadowing variable declaration:
- char *q;
The declaration of symbol "q" hides another identical declaration of
"q" in the same context. As the other "q" is already reused multiple
times and also can be reused again without negative side-effects,
just remove the shadowing declaration.
5. Just small cosmetics:
- if (ifsset() != 0)
+ if (ifsset())
The ifsset() macro is already coded by returning the boolean result
of a comparison operator, so no need to compare this boolean result
again against a numerical value. This also aligns the macros usage to
the remaining existing code.
Reviewed by: stefanf@
This includes adding support for ACLs into cp(1) and mv(1) userspace
utilities.
For mv(1), if _PC_ACL_EXTENDED is in effect for the source AND destination
operands, the destination file's ACLs shall reflect the source.
For cp(1), if _PC_ACL_EXTENDED is in effect for both source and destination
operands, and -p has been specified, the ACLs from the source shall be
preserved on the destination.
MFC after: 1 month
converting the stat() call to a lstat() call, which will cover the
situation. One can exercise this bug by referring a dangling link with
something like */the-link.
Approved by: re (scottl)
Submitted by: Simon 'corecode' Schubert [corecode fs ei tum de]
Obtained from: NetBSD via DragonFlyBSD (NetBSD rev. 1.51 and DragonFly
rev. 1.6)
MFC After: 3 days
promised by the Argument List Processing section introduction.
What follows the option in the options list is its long name,
not its argument (as is the case for the -c option). Also
sort references in the SEE ALSO section.
Approved by: re (blanket)
sort(1). This functionality is provided by the -S option now, and it
is useful even though a similar effect is achievable with sort(1),
since the latter doesn't work in combination with -h. This option is
also present in NetBSD, OpenBSD, and GNU fileutils, so there's clearly
a demand for it.
Noticed by: asmodai
have this option with identical semantics (sorting large files first).
-r can be used to reverse the sort if that is desired.
PR: 81625
Submitted by: Kostas Blekos <mplekos@physics.upatras.gr>, keramida
benefit of scripts start out as: #!/bin/sh -- # -*- perl -*-
With this fix in place, we can commit a change to kern/imgact_shell.c
so FreeBSD will process the `#!' line in shell-scripts in a more
standard fashion.
PR: 16393
Mentioned on: freebsd-arch
analogous to chmod(1)'s -h. It allows setting flags on symbolic links,
which *do* exist in 5.x+ despite a claim to the contrary in the
chflags(1) man page.
Suggested by: Chris Dillon
variable to show up correctly.
Note: This is really a bug with the stock tcsh configure.in script not
including <sys/types.h> before <utmp.h>. But, since config.h is maintained
separate from the contrib sources, this is the correct fix.
Noticed by: ache
- Move the description of the ``-c string'' option closer to the option itself.
- Add an ENVIRONMENT section (1)
- Add more .Xr cross references to the SEE ALSO section.
Obtained from: NetBSD (1)
work as expected when they have a "shebang line" of:
#!/bin/sh -- # -*- perl -*- -p
This specific line is recommended in some perl documentation, and I think
I've seen similar lines in documentation for ruby and python. Those
write-ups expect `sh' to ignore everything after the '--' if the first
thing after the '--' is a '#'. See chapter 19, "The Command-Line Interface"
in 3rd edition of "Programming Perl", for some discussion of why perl
recommends using this line in some circumstances.
The above line does work on solaris, irix and aix (as three data points),
and it used to work on FreeBSD by means of a similar patch to execve().
However, that change to execve() effected *all* shells (which caused
other problems), and that processing was recently removed.
PR: 16393 (the original request to fix the same issue)
Reviewed by: freebsd-current (looking at a slightly different patch)
MFC after: 1 week
- Document the fact that empty heading text suppresses the
heading line (e.g. 'ps -o pid='), as this is very useful
in scripts.
- Describe logname keyword more completely.
- Describe the printing of arguments more completely.
- Put lockname in the correct alphabetical order in the list
of all keywords.
- Correct sentence in standards section.
Submitted by: Jilles Tjoelker <jilles at stack nl>
PR: docs/73618
MFC After: 1 week
to exceed 10 megabytes in size (especially in X), bump the max
column width from 4 bytes to 5. This will make the ps auxw output
uniform again when a process's rss exceeds 10 megs.
It should be noted that when 5 digits becomes to small, other
solutions should be explored such as displaying them in megabytes
or having ps automatically re-size column widths.
Discussed with: gad
MFC after: 1 week
while opening of tcsh's message catalog. It gives us more flexibility, and
do not change current behaviour (since we call setlocale() here)
Submitted by: Rostislav Krasny <rosti_bsd@yahoo.com>
PR: bin/76773
MFC After: 3 days
regardless whether the output is to a terminal or not. As this is
consistent with the SUSPv2 specification (even though we do not
otherwise fully implement SUSPv2's ls(1) options), document this as it
is now, rather than trying to change the behaviour itself.
PR: docs/76072
Submitted by: Sebastian Rey <Sebastian.rey@gmx.net>
MFC after: 1 week
XXX from Tor: "The shell can also go into a similar loop if the child was
killed by signal 127, since the shell would believe the child to have
only stopped (WIFSTOPPED() macro returns nonzero value). Disallowing
signals 127 and 128 will fix that problem." See kern/19402 for details.
PR: bin/66242
Submitted by: tegge
Analysis and testcase by: demon
MFC after: 3 weeks
printing of the process environment will fail silently.
-define a function which will check to see if procfs is mounted on /proc
-Implement this test if the user specified -e
-If procfs is not mounted on /proc and -e was specified, print a warning.
informing the user that procfs(5) is required.
Reviewed by: wes, rwatson
WRT handling file and link names that reach the allowed
maximum for old tar and ustar archive formats.
PR: bin/40466
Submitted by: Cyrille Lefevre <email in the PR> (portions)
Reviewed by: freebsd-arch (silence)
MFC after: 1 month
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
instead of just !, this allows one to more easily locate/understand
the section of the manpage in question.
Additional wording correction by: keramida
Reviewed by: keramida
removing directories or if more than 3 files are listed in the
command line.
This feature is intended to provide a safe net but not being too
annoying like having "rm -i" for every deleting operations, and
is generally good for both newbies and power users, preventing
them from being so easily run into ``rm -rf /'', ``rm -rf *''
and so forth.
Originally implemented by Matthew Dillon for DragonFly, plus
some improvements done by various DragonFly contributors.
Approved by: murray (mentor; the original dillon's version)
Discussed with: des
Obtained from: DragonFly's bin/rm/
rm.c rev. 1.4 - 1.8
rm.1 rev. 1.3 - 1.4
MFC After: 1 month
occurrences of "/" in the argument list. This corresponds to Enhancement
Request Number 5 in the Austin Group TC2 Aardvark's XCU Defects Report
(<URL:http://www.opengroup.org/austin/aardvark/finaltext/xcubug.txt>).
Further discussion is available in the Austin Group mailing list archives
(<URL:http://www.opengroup.org/austin/mailarchives/>, "Defect in XCU rm")
and for Austin Group members, in the Austin Group Interpretations archive
(<URL:http://www.opengroup.org/austin/interps/>, AI-019)
This commit makes that check conditional on !POSIXLY_CORRECT, since it
is not strictly correct according to the current version of the standard
(but is expected to be correct according to the next version, and has
already been adopted by Solaris).
considered an error according to the Open Group Base Specification.
PR: standards/45738
Submitted by: Matthias Andree <matthias.andree@web.de>
MFC after: 3 days
to specify an alternative padding character when using a conversion
mode, or when using noerror with sync and an input error occurs. This
facilities reading old and error-prone media by allowing the user to
more effectively mark error blocks in the output stream.
on March 31 won't take you to March 2 or 3 (now the result will
be the last day of February.)
In general, now stepping by months from the last days of the current
month A will take you to the very last day of the target month B if
B is shorter than A.
The previous version would just step to March 31 and rely on mktime(3)
to correct the date. Despite its simplicity, such way was counter-intuitive
to users and caused pain to shell script writers.
Noticed by: Igor Timkin <ivt at gamma dot ru>
Approved by: brian
MFC after: 2 weeks
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
invalid information will be printed if the -t flag is specified.
$ df -t ufs
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 495726 139944 316124 31% /
/dev/ad0s1e 253678 6438 226946 3% /tmp
/dev/ad0s1f 56206340 13594248 38115586 26% /usr
/dev/ad0s1d 694126 19812 618784 3% /var
/dev/ad0s1d 694126 19812 618784 3% /var
$
Note that the mount point which is not accessible shows
up as the previous file system that was printed. The reason
for this is that df -t will call statfs(2) on the pathname
supplied by getfsstat(2).
This is done to refresh the file system statistics in the
event that a previous file system had a long delay in
providing its stats.
This change affects the df utility in the following ways:
o Teach df has to deal with statfs(2) failing. If statfs(2)
fails, fall back on the possibly stale stats provided by
the initial call to getfsstat(2).
o Print a warning that the fs stats could possibly be stale
o Modify the man page and document this new behavior
as a bug.
Approved by: bmilekic (mentor)
PR: 68165
back into epoch time. Everytime I'm asked to do this by someone I
have to spend about ten minutes recreating the same command line.
So record it under examples.
rev 1.18, but not documented in the man page) caused a failed chdir.
Otherwise, one can easily overwrite files.
Submitted by: Robert Nagy <robert@openbsd.org>
Obtained from: OpenBSD
(aka "command") will display "<defunct>", as does the output from "comm"
for those processes. Also do better checking for malloc() failures.
Submitted by: Cyrille Lefevre
the [acm]time are the same. I was going to use Scott's patch, but I
couldn't get the style quite right, so I used a patch of my own.
Submitted by: Scott Mitchell <scott+freebsd at fishballoon.org>
MFC after: 3 weeks
threads, put the command name in square brackets instead of parenthesis.
This matches NetBSD, and also seems to be what linux does. The sentence
which is added to the man page is taken straight from NetBSD.
PR: bin/65803
Submitted by: Cyrille Lefevre
Obtained from: NetBSD
kvm_getprocs() will provide useful information if it can, or *it*
will provide a zero value if it can not find something appropriate.
Submitted by: bde
Any [standard output] field need not be meaningful in all
implementations. In such a case a hyphen ('-') should be
output in place of the field value
So have the `-O label' option print out the string " -" if the
process has no label.
Approved by: Silence from rwatson and green (when asked in March...)
and number-of-threads tied to a process. Result can be seen by typing,
e.g.: ps -HO lwp,nlwp
These new options are not documented yet. More options will be coming,
and I will update the man page after I get farther along.
PR: bin/65803 (though adjusted to fit our present source)
Submitted by: Cyrille Lefevre
when copying per-process info before starting to sort the list. This way,
sort-by-CPU or sort-by-memory will only calculate values once-per-process,
instead of twice-per-comparison. Also take advantage of this to simplify
the pscomp() routine.
have no entries to print (either due to an empty directory or an
error). This makes the -l and -s options more consistent, like
Solaris and (Debian) Linux. To make this happen, tweak two
optimizations on the second call to display():
- Don't skip display() altogether, even if list == NULL.
- Don't skip the call to the printfn in display() if we
need to print the total.
PR: 45723
