unsigned integral type. Changing it doesn't seem to cause any
sign extension bugs in /usr/src. In the kernel, this is partly
because `struct speedtab' and its lookup function are too bogus
to use speed_t's for speeds - they use ints.
Reminded by: PR 5786
Add a bootstrap mode so that non-rtld versions of these objects can
be built when bootstrapping the system with NetBSD tools, headers
and libraries. Once the FreeBSD tools are built, the FreeBSD headers
are installed and *then* these objects can be recompiled with the
rtld references. Phew.
asm code didn't link the way it was supposed to and the calling convention
for the entry "function" turned out to be very different. On alpha
it's a true function, but on i386 it's a fudge. Blech.
So jdp suggested keeping separate sets of source and avoiding lots
of #ifdefs. These files are based on his i386-elf code, with crt1.c
borrowing code from NetBSD's crt0. The copyright reflects that.
Complicating matters, the code turned out to be difficult to bootstrap
build using NetBSD tools. To compile against the FreeBSD rtld header
requires FreeBSD specific headers, but these can't be installed until
the tools are built, and they can't be built without the FreeBSD crt
objects. Anal retentive. So I introduced a HAVE_RTLD #define that isn't
set during the build process until all the tools are built and the
headers installed.
now that has been committed.
The makefile is derived from the i386-elf version, modified to pick
up most of the source (except crt1.c) from i386-elf. With minor changes
to i386-elf/crt1.c, this directory can be combined with i386-elf to
be a single csu/elf directory for all seasons.
the rtld code pending implementation on the alpha.
The csu/i386-elf should be renamed as csu/elf and this directory
trashed. Consider this a temporary implementation.
List non-default asm sources in MDASM so that they replace the defaults.
For funny or incomplete syscalls, list them in NOASM to stop them
from getting built as defaults.
Include the architecture specific sys makefile like previously, but
what this contains differs. It defines MDASM which list architecture
specific asm code that *replaces* syscalls of the same name defined
in MIASM (which gets defined by the syscall.mk or netbsd_syscall.mk
dependent of NETBSD_SYSCALLS being defined). If a syscall has a
C source implementation or something funny done to it, or just doesn't
need default asm source generated for it, then it is listed in NOASM.
syscall.mk is generated by makesyscalls.sh with other syscall files.
netbsd_syscall.mk is a hand-generated equivalent. So if a new syscall
is added and no other makefiles are edited, it will automatically have
the default asm source generated for it (whether you want it or not).
Anything listed in MDASM gets added to SRCS and gets built. For
each syscall name in MIASM, if it doesn't exist in MDASM or NOASM,
it gets added to the ASM or ASMR lists to have code generated for it.
If the syscall name was listed in HIDDEN_SYSCALLS (intended for use
by libc_r, not libc which has it defined, but empty), then the name
is added to the ASMR list and gets renamed before being built;
otherwise it is added to the ASM list and gets built with the same
name.
I wonder if this is too complicated. But it works on both i386 and alpha.
substitution errors for variables that don't exist.
If a machine architecture dependent makefile exists, include it
to discover if libc or libc_r is being built with NetBSD syscalls
instead of FreeBSD ones.
Put a NO_QUAD thingy around the quad makefile so that 64-bit
architectures can ignore that sh*t.
In the test for MDSRCS being empty, add all MISRCS to SRCS, rather
than just ignoring them.
Define the HIDDEN_SYSCALLS macro as empty because libc doesn't have
renamed syscalls. This avoids an undefined macro error when
libc/sys/Makefile.inc goes to look though it. HIDDEN_SYSCALLS is
used by the equivalent makefile to this one in lib/libc_r to list
those syscalls that it needs to rename so that libc_r can provide
replacement functions.
Change MACHINE references to MACHINE_ARCH.
Declare the names of the syscalls that need to be renamed to allow
for the functions that libc_r provides replacements for. This list
used to be in lib/libc/sys/Makefile.inc, but has been moved here
to keep that makefile tidy and remove the temptation for people to
add things to the list without adding a libc_r replacement function.
prototypes for the spinlock functions that will be used for thread locks.
libc will have stubs declared with weak symbols. libpthread and libc_r
will have functions that really do something.
Changed MACHINE to MACHINE_ARCH with the expectation that pc98 will
use elf the same as i386.
Nuked tahoe and vax 'cause the files they reference aren't in the
tree. If you want vax goto NetBSD. If you want tahoe... tough.
Changes to support building with _POSIX_SOURCE set to 199309L:
1. Add sys/_posix.h to handle those preprocessor defs that POSIX
says have effects when defined before including any header files;
2. Change POSIX4_VISIBLE back to _POSIX4_VISIBLE
3. Add _POSIX4_VISIBLE_HISTORICALLY for pre-existing BSD features now
defined in POSIX. These show up when:
_POSIX_SOURCE and _POSIX_C_SOURCE are not set or
_POSIX_C_SOURCE is set >= 199309L
and vanish when:
_POSIX_SOURCE is set or _POSIX_C_SOURCE is < 199309L.
4. Explain these in man 9 posix4;
5. Include _posix.h and conditionalize on new feature test.
- Completely recoded the ypmatch cache code. The old code could leak
memory: it would allow the cache to grow, but never
shrink. The new code imposes the following limits:
o The cache is capped at a limit of 5 entries.
o Each entry expires after five seconds, at which point
its slot is freed.
o If an insertion is to be done and all five slots
are filled, the oldest entry is forcibly expired
to release its slot.
Also, the cache is implemented on a per-binding basis rather than
having a global cache covering all bindings. This means that each
bound domain has its own 5 slot cache.
- Changed clntudp_create() to clntudp_bufcreate() so that the
xmit/recv message buffer sizes can be set explicitly. NIS transactions
are rarely much larger than 1024 bytes since YPMAXRECORD is 1024.
The defaults chosen by clntudb_create() are actually much larger
than needed. I set the xmit buffer to a little over 1024 and the
recv buffer to a little over 2048. This saves a few Kbytes for each
NIS binding.
- Add my name to the copyright. I think I've made enough changes to
this file to merit it. :)
Note: these changes should go into the 2.2.x branch, but I'm waiting
on feedback from a tester to see if the cache fixes solve the reported
memory leak problem.
changes to bsd.lib.mk can handle building it early enough. Don't
use the same rule for ss_err.h and ss_err.c, else `make -jN' would
run the rule twice concurrently. Don't put ss_err.c out of order
in SRCS; doing so was a kludge to get ss_err.h built early enough
for plain `make'.
Don't put a non-generated file in CLEANFILES.
since there might be permanent entries still left after
calls to DeleteLink (it will be nullified by DeleteLink
if all entries are deleted, won't it ?)
2) in PacketAliasSetAddress, set the aliasing address
even when PKT_ALIAS_RESET_ON_ADDR_CHANGE is in effect.
Just don't clean up links in this case.
Submitted by: Ari Suutari <ari@suutari.iki.fi>
via: Charles Mott <cmott@srv.net>
PR: 5041
fix a slight confusion about which draft of threads we are supporting.
this allows something as big and ugly as samba to be compiled with libc_r
and still work! our user-level pthreads seems amazingly robust!
implement mkdtemp
improve man page for mk*temp
use arc4random to seed extra XXX's randomly
Optionally warn of unsafe mktemp uses
From various commits by theo de raadt and Todd Miller.
Obtained from: OpenBSD
This should go into 2.2 after a testing period.
specifically:
uthread_accept.c: Fix for inherited socket not getting correct entry in
pthread flags.
uthread_create.c: Fix to allow pthread_t pointer return to be null if
caller doesn't care about return.
uthread_fd.c: Fix for return codes to be placed into correct errno.
uthread_init.c: Changes to make gcc-2.8 thread aware for exception stack
frames (WARNING: This is #ifdef'ed out by default and is
different from the Cygnus egcs fix).
uthread_ioctl.c: Fix for blocking/non-blocking ioctl.
uthread_kern.c: Signal handling fixes (only one case left to fix,
that of an externally sent SIGSEGV and friends -
a fairly unusual case).
uthread_write.c: Fix for lock of fd - ask for write lock, not read/write.
uthread_writev.c: Fix for lock of fd - ask for write lock, not read/write.
Pthreads now works well enough to run the LDAP and ACAPD(with the gcc 2.8 fix)
sample implementations.
one group. Thanks to Dirk Froemberg for supplying a patch for this. I will
be closing out the PR and moving this to the 2.2.5 branch later: my login
sessions to freefall from Columbia are ridiculously spotty today.
PR: 5610
Submitted by: Dirk Froemberg <ibex@physik.TU-Berlin.DE>
into libc. This reduces the size of every dynamically linked
executable by 248 bytes, and it reduces the size of static executables
by a lesser amount. It also eliminates some global namespace
pollution.
With this change in place, the source for dlfcn.h should probably
be moved to "/usr/src/include". I'll save that for another day.
Compatibility note: Programs which use dlopen, if compiled on
systems with this change, will not run on systems with a libc from
prior to this change. Very few programs use dlopen, so I think
that is OK.
isn't a prerequisite, since it isn't required for the prototypes
and isn't always needed to call the functions (the address family
might be a variable).
and the pre-Lite2 vfsconf interfaces.
For getvfsent.c, just define _OLD_VFSCONF. This will give the
current default macro hacks in <sys/mount.h> when the default is
reversed. This is an intermediate step.
makefile doesn't install them, and they couldn't be used without
lots of undocumented -I's in CFLAGS. tcl.h is still installed in
/usr/include/tcl/. Note that rev.1.24 of tcl_bmake/mkMakefile.sh
broke all the section 3 tcl man pages by putting it there instead
of in /usr/include.
are in kvm_uread():
- the setting of errno before checking it in the lseek() was lost.
- EOF handling was lost. kvm_uread() retried forever on EOF. EOF is
not really an error, but report it one as in rev.1.2.
- reporting of errno after a read error was lost.
Fixed style bugs in rev.1.3 and rev.1.12.
Not fixed: errno is not reported after lseek() failures.
overwrites it. This actually showed up when running under an old
kernel when free() called the madvise() stub which set errno, causing
getcwd() to return EOPNOTSUPP instead of ERANGE.
