Avoid using DELAY() since it can try to use spin locks on CPUs without
a P-state invariant TSC. For cpu_lock_delay(), always use the TSC if
it exists (even if it is not P-state invariant) to delay for a
microsecond. If the TSC does not exist, read from I/O port 0x84 to
delay instead.
PR: 228768
Reported by: Roger Hammerstein <cheeky.m@live.com>
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17851
This uses slightly simpler logic than the existing code by using the
full 64-bit counter and thus not having to worry about counter
overflow.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17850
I missed this case when testing r340157. For now just keep
$PATH when we aren't bootstrapping a compiler so that the build
can find cc/c++/ld without an absolute path.
Reported by: yuripv
More time is still needed for ports to accommodate the migration to
capsicum.h.
The header was renamed in 2014 due to concerns about conflicts with with
a draft POSIX.1e capability.h header on other systems and there is (now)
no need for complex autoconf tests for both capability.h and capsicum.h.
Any supported Capsicum-capable system has capsicum.h.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
Rather than unconditionally setting PTE_D for all writeable kernel
mappings, set PTE_D for writable mappings of unmanaged pages (whether
user or kernel). This matches what amd64 does and also matches what
the RISC-V spec suggests (preset the A and D bits on mappings where
the OS doesn't care about the state).
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: DARPA
It is not necessary to build libelf and libdwarf this early. Furthermore,
when building on Linux/MacOS, m4 will only be built during the bootstrap
tools phase and not be available in $PATH before.
Reviewed By: emaste
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D17800
Inheriting $PATH during the build phase can cause the build to fail when
compiling on a different system due to missing build tools or incompatible
versions somewhere in $PATH. This has cause build failures for us before
due to the jenkins slaves still running FreeBSD 10.
Listing the tools we depend on explicitly instead of just using whatever
happens to be in $PATH allows us to check that we don't accidentally add a
new build dependency.
All tools that do no need to be bootstrapped will now be symlinked to
${WORLDTMP}/legacy/bin and during the build phase $PATH will only contain
${WORLDTMP}. There is also a new variable "BOOTSTRAP_ALL_TOOLS" which can
be set to force compiling almost all bootstrap tools instead of symlinking
them. This will not bootstrap tools such as cp,mv, etc. since they may be
used during the build and for those we should really only be using POSIX
compatible options.
Furthermore, this change is required in order to be able to build on
non-FreeBSD hosts. While the same binaries may exist on Linux/MacOS they
often accept different flags or produce incompatible output.
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D16815
In r263232 sys/capability.h was renamed to sys/capsicum.h, to avoid
conflicts with a capability.h header found on other operating systems.
Sufficient time has now passed, so remove the old header at the
beginning of FreeBSD 13.
Discussed with: oshogbo
Sponsored by: The FreeBSD Foundation
Many async events that we see are called for this specific path. When
calling an async callback for a targetted device, XTP will lock that
specific device's path lock (same as what cam_periph_lock does). For
those AC_ events, assert we have the lock rather than trying to
recusrively take it (which causes panics since it's not recursive).
Add annotations about this and about the fact that AC_SCSI_AEN events
are generated now only in the ata stack (which cannot have a scsi_da
attachment). Leave it in place in case I've overlooked something as
the code is harmless.
This is fallout from my attempts to "fix" locking for softc->flags in
r330796 that's not been triggered often enough to get my attention
until now.
Sponsored by: Netflix
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D17837
The hwpmc pcpu sample buffer is prone to head of line blocking
when waiting for user process to return to user space and
collect a pending callchain. If more than one tick has elapsed
between the time the sample entry was marked for collection and
the time that the hardclock pmc handler runs to copy the records
to a larger temporary buffer, mark the sample entry as not in
use.
This changes reduces the number of samples marked as not valid
when collecting under load from ~99.5% to 5-20%.
Reported by: mjg@
MFC after: 3 days
Especially on new POWER9 systems, the console can be filled with
SMP: AP CPU #XX launched
messages. This can also slow down the console printing. Instead, do what
x86 now does, as of r333335, and print it all on one line, unless
bootverbose is set.
that it uses the same ctype maps and functions as other UTF-8 locales.
Reviewed by: bapt, cem, eadler
Approved by: kib (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17833
There is no need to check if capdns is NULL.
If we will build the system without casper all cap_gethostaddr will be
replaced by the standard functions.
Please notice that we still don't clean information in nvlist structures.
Submitted by: David CARLIER <devnexen@gmail.com>
Differential Revision: https://reviews.freebsd.org/D16777
The getaddrinfo(3) and gethostbyname(3) are used to return the address for a
given hostname. The getnameinfo(3) and gethostbyaddr(3) are used to return
hostname for a given address. Right now in casper, we have two limitations:
- NAME which allows resolving DNS names.
- ADDR which allows to do revert DNS lookups.
Before this change the rights was mixed up:
NAME - getnameinfo(3) and gethostbyname(3)
ADDR - gethostbyaddr(3) and getaddrinfo(3)
Which no matters on limitation allowed us to resolve DNS names and do DNS
lookups basically by using a different set of functions.
Now the NAME type allows getaddrinfo(3) and gethostbyname (3)functions,
and the ADDR names allow to use gethostbyaddr(3) and getnameinfo(3) functions.
Reviewed by: pjd, bcr
MFC after: 3 weeks
Discussed with: hrs
Differential Revision: https://reviews.freebsd.org/D16930
Previously the combination of relro (implicit), -z now and ifunc use
resulted in a segfault when applying ifuncs after relro (test binary
here just calls amd64_get_fsbase()):
| % env LD_DEBUG=1 libexec/rtld-elf/obj/ld-elf.so.1 a.out
| ...
| enforcing main obj relro
| ...
| resolving ifuncs
| reloc_jmpslot: *0x203198 = 0x189368ea4570
| zsh: bus error (core dumped) LD_DEBUG=1 obj/ld-elf.so.1 ~/a.out
Reported by: Shawn Webb
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Existing base causes conflicts for direct execution of ld-elf.so.1
because default linking base for non-PIE binaries is 0x10000.
Reported and tested by: Mark Millard <marklmi26-fbsd@yahoo.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.
A set of new sysctl(8) added to control this ability or disable it:
net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.
net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.
MFC after: 1 month
The writeRandomBytes_arc4random is not used if the arc4random_buf
is available. This caused compiler to throw warnings which are treated as
an error in libexpact.
Approved by: vangyzen
You should not be using DES. You should not have been using DES for the
past 30 years.
The ed DES-CBC scheme lacked several desirable properties of a sealed
document system, even ignoring DES itself. In particular, it did not
provide the "integrity" cryptographic property (detection of tampering), and
it treated ASCII passwords as 64-bit keys (instead of using a KDF like
scrypt or PBKDF2).
Some general approaches ed(1) users might consider to replace the removed
DES mode:
1. Full disk encryption with something like AES-XTS. This is easy to
conceptualize, design, and implement, and it provides confidentiality for
data at rest. Like CBC, it lacks tampering protection. Examples include
GELI, LUKS, FileVault2.
2. Encrypted overlay ("stackable") filesystems (EncFS, PEFS?, CryptoFS,
others).
3. Native encryption at the filesystem layer. Ext4/F2FS, ZFS, APFS, and
NTFS all have some flavor of this.
4. Storing your files unencrypted. It's not like DES was doing you much
good.
If you have DES-CBC scrambled files produced by ed(1) prior to this change,
you may decrypt them with:
openssl des-cbc -d -iv 0 -K <key in hex> -in <inputfile> -out <plaintext>
Reviewed by: allanjude, bapt, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17829
The idea behind those functions is not to force consumers to remember that there
is a need to check errno on failure. We already have a caph_enter(3) function
which does the same for cap_enter(2).
MFC after: 2 weeks
We already allow to use poll(2). There is no reason to disallow ppoll(2).
PR: 232495
Submitted by: Stefan Grundmann <sg2342@googlemail.com>
Reviewed by: cem, oshogbo
MFC after: 2 weeks
While here, use LANG as the proper source to select man pages language/encoding,
falling back to LC_CTYPE.
Reviewed by: bapt
Approved by: kib (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17835
Update contrib/expat by merging from the vendor branch.
Update expat_config.h manually, using
make -C /usr/ports/textproc/expat2 configure
as a baseline.
MFC after: 1 month
Relnotes: yes
Security: yes; see contrib/expat/Changes since 2.2.0
Sponsored by: Dell EMC Isilon
Factorize code by using struct sockaddr_storage to handle both ipv6 and ipv4
Discussed with: rmacklem
Reviewed by: manu
MFC after: 1 month
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D13223
Make it clear that ipfw action set for layer2 frames it a bit limited.
PR: 59835
Reviewed by: yuripv
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17719
It is unused after r340102, and more important, I do not see how to
define textsize in both practically useful and correct way, for binaries
with more that one executable segments.
Sponsored by: The FreeBSD Foundation
Do not use textsize and do not flush everything between map base and
base + textsize, because unmapped areas cannot be flushed.
This makes Obj_Entry textsize only use go away, and I will remove it
later.
Reported by: tuexen
Tested by: Mark Millard <marklmi26-fbsd@yahoo.com>
Sponsored by: The FreeBSD Foundation
The buffer is already zeroed in compile_rule() function, and also it
may contain configured F_NOT flag in o.len field. This fixes the filling
for "not icmp6types" opcode.
PR: 232939
MFC after: 3 days
These are built with the host toolchain which may not support retpoline.
While here, move the MK_ overrides to a separate line and sort them
alphabetically to support future changes.
MFC with: r339511
Sponsored by: The FreeBSD Foundation
Having the flag named "6" can possibly be a problem for configurations
where parsing strings and numbers can produce ambivalent results.
Rename the "6" flag to the "S"ix (or Silence-IPv4) flag.
