- Specify BUS_DMA_NOWAIT for bus_dmamap_load() on rx refill, since
callbacks are not supposed to be used.
- Match tso/non-tso tags to corresponding tx map operations. Create
separate tso maps for tx descriptors. In particular, do not use
non-tso tag to load, unload, or destroy a map created with tso tag.
- Add missed bus_dmamap_sync() calls.
Submitted by: marius.
Reported and tested by: pho
Reviewed by: marius
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Based on the description in Linux man page.
Reviewed by: markj, ngie (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18837
If fsqrts is emulated with +INF as its argument, the 0 return value causes a
NULL pointer dereference, panicking the system. Follow the PowerISA and
return +INF with no FP exception.
MFC after: 1 week
vmm's CPUID emulation presented Intel topology information to the guest, but
disabled AMD topology information and in some cases passed through garbage.
I.e., CPUID leaves 0x8000_001[de] were passed through to the guest, but
guest CPUs can migrate between host threads, so the information presented
was not consistent. This could easily be observed with 'cpucontrol -i 0xfoo
/dev/cpuctl0'.
Slightly improve this situation by enabling the AMD topology feature flag
and presenting at least the CPUID fields used by FreeBSD itself to probe
topology on more modern AMD64 hardware (Family 15h+). Older stuff is
probably less interesting. I have not been able to empirically confirm it
is sufficient, but it should not regress anything either.
Reviewed by: araujo (previous version)
Relnotes: sure
In FreeBSD, this is normal situation that the Tx ring is being full. In
hat case, the packet is put back into drbr and the next attempt to send
it is taken after the cleanup.
Too much logs like this can cause system instability and even cause the
device reset (because keep alive or cleanup could be missed).
To fix that, the log level of this message is changed to debug.
Upon this change upgrade the driver version to v0.8.2.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
- Remove CS=2 entry from spigen-rpi2 since it didn't work
- Add spigen-rpi3 overlay for Raspberry Pi 3
- Enable rpi overlay modules for GENERIC kernel on aarch64
PR: 233489
Submitted by: bobf@mrp3.com
Reviewed by: db
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16088
will return success when the kernel is built without support of
the capability mode.
It is important to note, that I'm taking a more conservative approach
with these changes and it will be done in small steps.
Reviewed by: jhb
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D18744
bsd.{files,conf}.mk recently changed to allow *DIR to name a variable
rather than a path.
STAGE_DIR.* need to adapt.
Reviewed by: bdrewery
Differential Revision: D18847
upstream it seems).
The tlv variable was changed to a pointer but the advancement of the data pointer
was left as sizeof(tlv). While the sizeof the (now) pointer equals the
sizeof 2 x uint32_t (size of the struct) on 64bit platforms, on 32bit platforms
the size of the advancement of the data pointer was wrong leading to
firmware load issues.
Correctly advance the data pointer by the size of the structure and not by
the size of a pointer.
PR: 219683
Submitted by: waddlesplash gamil.com (Haiku) on irc
MFC after: 1 week
ccr reuses the control queue and first rx queue from the first port on
each adapter. The driver cannot send requests until those queues are
initialized. Refuse to create sessions for now if the queues aren't
ready. This is a workaround until cxgbe allocates one or more
dedicated queues for ccr.
PR: 233851
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18478
This reduces amount of locking required for these zones.
Also, for cache only zones (UMA_ZFLAG_CACHE) accounting uz_items wasn't
correct at all, since they may allocate items directly from their backing
store and then free them via UMA underflowing uz_items.
Tested by: pho
atomic updates and reduces amount of data protected by zone lock.
During startup point these fields to EARLY_COUNTER. After startup
allocate them for all early zones.
Tested by: pho
Rather than mentioning the requirement for 4.x binaries but not
explaining why (it was assuming an upgrade from 4.x to 5.0-current),
explain when compat options are needed (for running existing host
binaries) in a more general way while using a more modern example
(COMPAT_FREEBSD11 for 11.x binaries). While here, explicitly mention
that a GENERIC kernel should always work.
Reported by: Robert Huff <roberthuff@rcn.com>
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18740
When the TCP window scale option is not used, and the window
opens up enough in one soreceive, a window update will not be sent.
For example, if recwin == 65535, so->so_rcv.sb_hiwat >= 262144, and
so->so_rcv.sb_hiwat <= 524272, the window update will never be sent.
This is because recwin and adv are clamped to TCP_MAXWIN << tp->rcv_scale,
and so will never be >= so->so_rcv.sb_hiwat / 4
or <= so->so_rcv.sb_hiwat / 8.
This patch ensures a window update is sent if the window opens by
TCP_MAXWIN << tp->rcv_scale, which should only happen when the window
size goes from zero to the max expressible.
This issue looks like it was introduced in r306769 when recwin was clamped
to TCP_MAXWIN << tp->rcv_scale.
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D18821
The cache_handle_range macro to handle the arm64 instruction and data
cache operations would return when it was complete. This causes problems
for arm64_icache_sync_range and arm64_icache_sync_range_checked as they
assume they can execute the i-cache handling instruction after it has been
called.
Fix this by making this assumption correct.
While here add missing instruction barriers and adjust the style to
match the rest of the assembly.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18838
Sometimes, for negated tables, pf can log 'pfr_update_stats: assertion failed'.
This warning does not clarify anything for users, so silence it, just as
OpenBSD has.
PR: 234874
MFC after: 1 week
o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
Do not lose error condition by always returning 0 from set_led.
None of the calls to set_led checks for return value at the moment so
none of API consumers in base is affected.
PR: 231567
Submitted by: Bertrand Petit <bsdpr@phoe.frmug.org>
MFC after: 1 week
mv_pci driver reads PCI memory window layout from DTB data and if the
data is incomplete falls back to default value. The value is too small
to fit two PCI spaces for mwlwifi devices on WRT3200ACM so the resource
allocation for them fails. Increase the default to 4Mb from 1Mb so
the devices can be properly attached.
MFC after: 1 week
two zones sharing a keg may have different limits. Now this is going
to work:
zone = uma_zcreate();
uma_zone_set_max(zone, limit);
zone2 = uma_zsecond_create(zone);
uma_zone_set_max(zone2, limit2);
Kegs no longer have uk_maxpages field, but zones have uz_items. When
set, it may be rounded up to minimum possible CPU bucket cache size.
For small limits bucket cache can also be reconfigured to be smaller.
Counter uz_items is updated whenever items transition from keg to a
bucket cache or directly to a consumer. If zone has uz_maxitems set and
it is reached, then we are going to sleep.
o Since new limits don't play well with multi-keg zones, remove them. The
idea of multi-keg zones was introduced exactly 10 years ago, and never
have had a practical usage. In discussion with Jeff we came to a wild
agreement that if we ever want to reintroduce the idea of a smart allocator
that would be able to choose between two (or more) totally different
backing stores, that choice should be made one level higher than UMA,
e.g. in malloc(9) or in mget(), or whatever and choice should be controlled
by the caller.
o Sleeping code is improved to account number of sleepers and wake them one
by one, to avoid thundering herd problem.
o Flag UMA_ZONE_NOBUCKETCACHE removed, instead uma_zone_set_maxcache()
KPI added. Having no bucket cache basically means setting maxcache to 0.
o Now with many fields added and many removed (no multi-keg zones!) make
sure that struct uma_zone is perfectly aligned.
Reviewed by: markj, jeff
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D17773
shell scripts in base, removes the bogus "copyleft", adds the BeerWare license
header and uses rc.subr(8) new 'enable' keyword for adding entries in
rc.conf(5).
Submitted by: erdgeist <erdgeist@erdgeist.org>
Approved by: bapt
MFC after: 2 weeks
vm_kmem_size is u_long, and it might be not capable of holding page
count times PAGE_SIZE, even when scaled down by VM_KMEM_SIZE_SCALE. As
bde reported, 12G PAE config ends up with zero for kmem size.
Explicitly check for overflow and clamp kmem size at vm_kmem_size_max.
If we end up at zero size because VM_KMEM_SIZE_MAX is not defined,
panic with clear explanation rather then failing in a way which is
hard to relate.
Reported by: bde, pho
Tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18767
Add asn1_compile, make-roken, kcc, and slc to the OptionalObsoleteFiles.inc
so they would be removed during delete-old stage if the new world is built
without Kerberos support.
PR: 230725
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru>
MFC after: 1 week
Just like for Acer C270 chromebook the E820 extmem workaround is required for
FreeBSD to boot on Dell chromebook.
PR: 204916
Submitted by: Keith White <kwhite@site.uottawa.ca>
MFC after: 1 week
cpu_icache_sync_range(), except that it sets pcb_onfault to catch any page
fault, as doing cache maintenance operations for non-mapped generates a
data abort, and use it in freebsd32_sysarch(), so that a userland program
attempting to sync the icache with unmapped addresses doesn't crash the
kernel.
Spotted out by: andrew
r319722 separated struct socket and parts of the socket I/O path into
listening-socket-specific and dataflow-socket-specific pieces. Listening
socket connection notifications are now handled by solisten_wakeup() instead
of sowakeup(), but solisten_wakeup() does not currently post SIGIO to the
owning process.
PR: 234258
Reported by: Kenneth Adelman
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18664
There may be various side effects (device timeout, firmware and / or
kernel panic) when an invalid (or inapplicable - e.g., an MCS rate
for 11g-only device) is set; check rates before sending the frame to
the driver.
How-to-reproduce:
Set an MCS (real or bogus - with 0x80 bit set) rate in ibp_rate0 field
for any device that uses ieee80211_isratevalid() for rate checks -
rum(4), run(4), ural(4), bwi(4) or ral(4); if kernel is compiled
with INVARIANTS the check will result in "rate %d is basic/mcs?" panic.
Tested with WUSB54GC (rum(4)), AP mode.
MFC after: 1 week
