Commit Graph

2228 Commits

Author SHA1 Message Date
obrien
ea5b5bab77 * Create entire directory path for modules.
* Don't ignore error returns.
2000-08-03 09:06:53 +00:00
sheldonh
14d2d4059b Don't bitch when trying to create a ${DESTDIR}/modules which already
exists.
2000-08-03 08:24:42 +00:00
peter
36bd627297 Make the pfil.c code conditional on either option PFIL_HOOKS or IPFILTER.
The previous line was an AND.  This change means you can compile in the
pfil_hook stuff and make it available for other users besides ipfilter.
2000-08-03 02:03:30 +00:00
nsayer
01076940c6 Hook up the ESS solo driver in the correct branch this time. 2000-08-01 22:44:18 +00:00
green
a92ef5a71e -mkdir the ${DESTDIR}/modules directory upon modules-install in case it
doesn't exist.  This could bite you by allowing you merrily install your
modules one on top of the other as the regular file ${DESTDIR}/modules
and think it completed properly...
2000-07-27 03:50:25 +00:00
jhb
19b5ca0da4 Remove the SHM_PHYS_BACKED option.
Approved by:	peter (in principle)
2000-07-26 19:40:42 +00:00
jhb
c4b5226c5f Document the SYSV IPC kernel options. Also, remove the SHM_PHYS_BACKED
option as it is no longer used.

PR:		docs/20080
Submitted by:	Michael Robinson <robinson@netrinsics.com>
2000-07-26 19:39:46 +00:00
asmodai
7cb47a1160 Document IPFILTER_DEFAULT_BLOCK.
PR:		20075
Submitted by:	Arjan de Vet <Arjan.deVet@adv.iae.nl>
2000-07-25 15:40:19 +00:00
ps
26c8aa22cd kern_accf.c is now uipc_accf.c after repo copy. 2000-07-25 07:32:15 +00:00
ken
37687cde6a Allocate major number 153 for the character device interface for the ti(4)
driver.
2000-07-24 21:21:03 +00:00
phk
73b9f713c6 Allocate major 152 to ACPI.
Requested by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
2000-07-24 19:00:18 +00:00
asmodai
59635bcf3c Document device tdfx and options TDFX_LINUX. 2000-07-24 11:16:56 +00:00
nsayer
14503a8247 Add the tap driver.
The tap driver is used to present a virtual Ethernet interface to the
system. Packets presented by the network stack to the interface are
made available to a character device in /dev. With tap and the bridge
code, you can make remote bridge configurations where both sides of
the bridge are separated by userland daemons.

This driver also has a special naming hack to allow it to serve a similar
purpose to the vmware port.

Submitted by:	myevmenkin@att.com, vsilyaev@mindspring.com
2000-07-20 17:01:10 +00:00
msmith
dcabcfeaa1 Add major numbers for the Adaptec FSA RAID controller. 2000-07-20 01:12:02 +00:00
kris
c2e76f6679 Temporary hack for the benefit of the X-Bone project
(http://www.isi.edu/xbone). I expect this to go away in due course.

Submitted by:	Lars Eggert <larse@ISI.EDU>
2000-07-20 00:35:37 +00:00
phk
3224acf9b2 Driver for LMC1504 card: four port E1 or fractional E1.
T1 support is possible but I have no T1 hardware to test with.

The vendor can be found at: www.lanmedia.com
2000-07-18 11:17:25 +00:00
n_hibma
5d39f96c2d Add the umodem driver. 2000-07-18 10:49:45 +00:00
sheldonh
263ffe32d1 Rename MDNSECT to MD_NSECT and declare it as something that isn't
default in NOTES.

Requested by:	bde
Approved by:	phk
2000-07-17 13:13:04 +00:00
itojun
538d8deb71 s/IPSEC_IPV6FWD/IPSEC/. this avoids unexpected behavior on ipv6 fowarding.
(even if you ask for tunnel-mode encryption packets will go out in clear)
sync with kame.
2000-07-16 07:56:54 +00:00
ken
f96551d2a7 Get rid of non-existent CAM 'scan' device.
PR:		19961
Submitted by:	Cyrille Lefevre <clefevre@citeweb.net>
2000-07-16 02:49:23 +00:00
sheldonh
8d94fa095e Add options<sp><tab>MDNSECT=2000 . 2000-07-14 12:21:14 +00:00
sheldonh
62dee1d507 Actually allow ``options MDNSECT=<numsects>'' in kernel configs to
specify the default maximum size of malloc(9)-backed md(4) devices
and complete the documentation of this option.
2000-07-14 12:14:13 +00:00
dfr
6ab55f9709 Add support for Intel's i810 chipset with integrated graphics. An
associated patch to XFree86 allows the X server to work with this chipset
on FreeBSD. Additional work will include porting the Linux 3D driver.

Submitted by: Ruslan Ermilov <ru@FreeBSD.org>
2000-07-12 10:13:07 +00:00
mckusick
a3d0c189ea Add snapshots to the fast filesystem. Most of the changes support
the gating of system calls that cause modifications to the underlying
filesystem. The gating can be enabled by any filesystem that needs
to consistently suspend operations by adding the vop_stdgetwritemount
to their set of vnops. Once gating is enabled, the function
vfs_write_suspend stops all new write operations to a filesystem,
allows any filesystem modifying system calls already in progress
to complete, then sync's the filesystem to disk and returns. The
function vfs_write_resume allows the suspended write operations to
begin again. Gating is not added by default for all filesystems as
for SMP systems it adds two extra locks to such critical kernel
paths as the write system call. Thus, gating should only be added
as needed.

Details on the use and current status of snapshots in FFS can be
found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness
is not included here. Unless and until you create a snapshot file,
these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
nsayer
dc89f21663 Reserve 149 for the TAP device. Look for it in a source tree near you
soon.
2000-07-11 15:13:49 +00:00
nyan
b5738d479e Merge from the following changes.
sys/conf/files.i386		1.321
sys/dev/syscons/syscons.c	1.343
sys/i386/isa/spkr.c		1.46
sys/isa/fd.c			1.183 and 1.185
sys/isa/syscons_isa.c		1.14
sys/isa/vga_isa.c		1.18
2000-07-11 12:50:34 +00:00
tanimura
7716c5370a Finally merge newmidi.
(I had been busy for my own research activity until the last weekend)

Supported devices:

SB Midi Port			(sbc + midi)
SB OPL3				(sbc + midi)
16550 UART			(midi, needs a trick in your hint)
CS461x Midi Port		(csa + midi)

OSS-compatible sequencer	(seq)

Supported playing software:

playmidi			(We definitely need more)

Notes:

/dev/midistat now reports installed midi drivers. /dev/sndstat reports
only pcm drivers. We need the new name(pcmstat?).

EMU8000(SB AWE) does not sound yet but does get probed so that the OPL3
synth on an AWE card works.

TODO:

MSS/PCI bridge drivers
Midi-tty interface to support general serial devices
Modules
2000-07-11 11:49:33 +00:00
mjacob
f5a6b75d84 Beef up a bit descriptions of SCSI devices and what the drive. 2000-07-10 15:37:03 +00:00
phk
9241ff9fc6 Finish repo-copy:
Move ufs/ufs/ufs_disksubr.c to kern/subr_disklabel.c.

These functions are not UFS specific and are in fact used all over the place.
2000-07-10 13:48:06 +00:00
alex
9474a996bc Add missing "a" in "Soft updates is technique".
PR:		19770
Submitted by:	Udo Erdelhoff <ue@nathan.ruhr.de>
2000-07-09 15:44:02 +00:00
alex
2cdcc841c4 Since this file is doc now, reorganize its structure.
Currently, many drivers support more than one bus of ISA, EISA, MCA,
PCI.

Before this commit, we had, for example, some SCSI devices listed more
than once, iirc, some up to three times (ISA/EISA, MCA, PCI).

Since now the "device" line is common for all of them and they only
differ for the hints stuff, I did the following:

First, list Busses: (E)ISA, MCA, PCI and explain, that only ISA
needs the hints stuff.

Move NIC/SCSI stuff, which were the only split sections, behind these
stuff.  Describe all drivers only one time and list all supported
chips.

List all device (+ hints for ISA, if possible).

I've also added few additional supported chips to some drivers, xl for
example and some SCSI drivers.

Also, softupdates is no longer disabled by default, so the comment should
not say, it's not enabled by default due to license issues.

Approved by:	asmodai

To come:	include PAO devices (imp volunteered for help)
2000-07-09 12:34:53 +00:00
mjacob
6301565880 Update SCSI device section, per Peter Wemm. I still
think the commented entries in GENERIC are the
right thing to do.
2000-07-08 07:44:01 +00:00
markm
3d0396c734 Add entropy gathering code. This will work whether the module is
compiled in or loaded.
2000-07-07 09:03:59 +00:00
rwatson
6fb1a7674a o Update e-mail address associated with /dev/audit to reflect
FreeBSD.org e-mail.
o Notice also that it's listed as "aud" not "audit" which will
  probably change in the near future with updates to the auditing
  implementation.
2000-07-04 20:40:20 +00:00
sumikawa
4fb63a4ede Add 'device stf', 6to4(one of IPv6 over IPv4 encapsulations) interface. 2000-07-04 17:37:21 +00:00
itojun
5f4e854de1 sync with kame tree as of july00. tons of bug fixes/improvements.
API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
  (also syntax change)
2000-07-04 16:35:15 +00:00
jhb
183fce400a Replace the PQ_*CACHE options with a single PQ_CACHESIZE option that you
set equal to the number of kilobytes in your cache.  The old options are
still supported for backwards compatibility.

Submitted by:	Kelly Yancey <kbyanc@posi.net>
2000-07-04 08:55:18 +00:00
phk
a02f6b8e45 Include SOFTUPDATES in NOTES/LINT by default. 2000-07-03 13:24:25 +00:00
alex
b878e64d53 - MSDOSFS can do both FAT _and_ FAT32. Since the name "MSDOS" might be
confusing, explecitely mention this.
- softupdates' README is no longer in contrib/softupdates. Fix new location.
2000-06-29 10:45:55 +00:00
archie
9af816e946 Make the ng_ether(4) node type dynamically loadable like the rest.
This means 'options NETGRAPH' is no longer necessary in order to get
netgraph-enabled Ethernet interfaces. This supports loading/unloading
the ng_ether.ko and attaching/detaching the Ethernet interface in any
order.

Add two new hooks 'upper' and 'lower' to allow access to the protocol
demux engine and the raw device, respectively. This enables bridging
to be defined as a netgraph node, if so desired.

Reviewed by:	freebsd-net@freebsd.org
2000-06-26 23:34:54 +00:00
peter
d8cc9ef001 Fix some fat-fingering of the isic lines. (argh!)
Fix some negative options that got turned on.

Submitted by:	bde (mostly)
2000-06-26 10:04:00 +00:00
markm
c740c026d9 Get the build bits right for the new Architecture Independant null- and
entropy drivers.
Reviewed by:	dfr(mostly)
2000-06-25 09:18:13 +00:00
peter
f7710446df Make the generated set headers depend on Makefile as well (that is where
the list of .o files comes from - if we change the list of files that
are built, we need to rescan the files)

Obtained from:	bde (indirectly)
2000-06-22 19:44:25 +00:00
cokane
e21ebed844 Add my name next to the majro for 3dfx (107), to reflect new info contact,
due to recent commit.
2000-06-22 06:12:30 +00:00
cokane
4b0a500c6d Converted all TDFX_VERBOSE ifdefs to DEBUG, now it gets debugged with the
rest of the kernel. Added new option TDFX_LINUX for optional
LINUX_EMULATION, so that perhaps some people don't have to use linux emu to
run the driver if they don't want to.
2000-06-22 05:41:21 +00:00
cokane
57e827a96d Stick the tdfx entry in here, after some cleaning. 2000-06-22 04:41:30 +00:00
cokane
fa386ea6a3 Fix the 'file not found' in the load target, someone
forgot to add the '.ko' to the end of the module filename.
2000-06-22 02:07:18 +00:00
kato
b3523df6cb PC-98 version of ed driver is a statically limited driver.
Pointed out by:	haro@tk.kubota.co.jp (Munehiro Matsuda)
2000-06-21 14:54:19 +00:00
alfred
e3e72a583b return of the accept filter part II
accept filters are now loadable as well as able to be compiled into
the kernel.

two accept filters are provided, one that returns sockets when data
arrives the other when an http request is completed (doesn't work
with 0.9 requests)

Reviewed by: jmg
2000-06-20 01:09:23 +00:00
gallatin
293ce673c8 Add support for the Alpha Processor, Inc. UP1000 system.
Reviewed by: dfr
Thanks to:  Alpha Processor Inc. for supplying the hardware.
2000-06-19 21:15:45 +00:00