Note: there was a merge conflict resolved by me.
illumos/illumos-gate@43297f973a43297f973ahttps://www.illumos.org/issues/3821
We recently had nodes with some of the latest zfs bits panic on us in a
rollback-heavy environment. The following is from my preliminary analysis:
Let's look at where we died:
> $C
ffffff01ea6b9a10 taskq_dispatch+0x3a(0, fffffffff7d20450, ffffff5551dea920, 1)
ffffff01ea6b9a60 zil_clean+0xce(ffffff4b7106c080, 7e0f1)
ffffff01ea6b9aa0 dsl_pool_sync_done+0x47(ffffff4313065680, 7e0f1)
ffffff01ea6b9b70 spa_sync+0x55f(ffffff4310c1d040, 7e0f1)
ffffff01ea6b9c20 txg_sync_thread+0x20f(ffffff4313065680)
ffffff01ea6b9c30 thread_start+8()
If we dig in we can find that this dataset corresponds to a zone:
> ffffff4b7106c080::print zilog_t zl_os->os_dsl_dataset->ds_dir->dd_myname
zl_os->os_dsl_dataset->ds_dir->dd_myname = [ "8ffce16a-13c2-4efa-a233-
9e378e89877b" ]
Okay so we have a null taskq pointer. That only happens during the calls to
zil_open and zil_close. If we poke around we can see that we're actually in
midst of a rollback:
> ::pgrep zfs | ::printf "0x%x %s\\n" proc_t . p_user.u_psargs
0xffffff43262800a0 zfs rollback zones/15714eb6-f5ea-469f-ac6d-
4b8ab06213c2@marlin_init
0xffffff54e22a1028 zfs rollback zones/8ffce16a-13c2-4efa-a233-
9e378e89877b@marlin_init
0xffffff4362f3a058 zfs rollback zones/0ddb8e49-ca7e-42e1-8fdc-
4ac4ba8fe9f8@marlin_init
0xffffff5748e8d020 zfs rollback zones/426357b5-832d-4430-953e-
10cd45ff8e9f@marlin_init
0xffffff436b867008 zfs rollback zones/8f36bf37-8a9c-4a44-995c-
6d1b2751e6f5@marlin_init
0xffffff4381ad4090 zfs rollback zones/6c8eca18-fbd6-46dd-ac24-
2ed45cd0da70@marlin_init
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@90f2c094b390f2c094b3https://www.illumos.org/issues/7181
zfsvfs_setup() is called in both zfs_mount and zfs_resume_fs paths.
dmu_objset_set_user(zfsvfs->z_os, zfsvfs) is called early in zfsvfs_setup()
before the setup is actually completed,
thus an under-constructed zfsvfs becomes visible.
Additionally, there is nothing to serialize the two call paths. As a result two
threads can step on each other's toes.
assertion failed: zilog->zl_clean_taskq == NULL, file:
../../common/fs/zfs/zil.c, line: 1772
> $c
vpanic()
0xfffffffffbdf6928()
zil_open+0x45(ffffff1bbc5dd000, fffffffff7993880)
zfsvfs_setup+0x84(ffffffb378d77000, 0)
zfs_resume_fs+0x132(ffffffb378d77000, ffffffb37ddcf000)
zfs_ioc_rollback+0x96(ffffffb37ddcf000, ffffff01dcdc4cd0, ffffff01aa091000)
zfsdev_ioctl+0x215(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
cdev_ioctl+0x39(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
spec_ioctl+0x60(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
fop_ioctl+0x55(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
ioctl+0x9b(7, 5a19, 80465f8)
sys_syscall32+0x1f7()
> ffffff1bbc5dd000::print objset_t os_zil
os_zil = 0xffffff1c053cf7c0
> 0xffffff1c053cf7c0::print zilog_t zl_clean_taskq
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 2 weeks
already free blocks
7199 dsl_dataset_rollback_sync may try to free already free blocks
7200 no blocks must be born in a txg after a snaphot is created
illumos/illumos-gate@bfaed0b91ebfaed0b91ehttps://www.illumos.org/issues/7199
dsl_dataset_rollback_sync may try to free already freed blocks when it calls
dsl_destroy_head_sync_impl to destroy a temporary clone.
That happens if a snapshot to which we are rolling back and from which the
clone is created has some ZIL records.
https://www.illumos.org/issues/7200
No new blocks must be born in a dataset in the same TXG after a snapshot of the
dataset is taken.
Those blocks would have the same blk_birth as the dataset's ds_prev_snap_txg
and as such they would be presumed to belong o the snapshot while in fact they
do not.
All the datasets must be clean before sync tasks are run, so the described
scenario may happen only if one of the sync tasks dirties the dataset and
another sync task takes its snapshot.
Then, there will be another sync pass because of the dirty data and the new
blocks will be born in the same TXG when the data is written out.
It seems that almost all of the existing sync tasks modify only MOS and do not
dirty any objsets.
The only exception that I've been able to identify so far is the rollback which
can modify an objset when it zeroes out the objset's ZIL.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 3 weeks
and zfs_ioc_rename
illumos/illumos-gate@690041b9ca690041b9cahttps://www.illumos.org/issues/7180
If a filesystem is not unmounted while the rename is being performed, then, for
example, a concurrect zfs rollback may call zfs_suspend_fs followed by
zfs_resume_fs on the same filesystem.
The latter takes the filesystem's name as an argument. If the filesystem name
changes as a result of the rename, then dmu_objset_hold(osname, zfsvfs, &os)
call in zfs_resume_fs would fail resulting in a kernel panic.
So far I have been able to reproduce this problem on FreeBSD where zfs rename
has -u option that skips the unmounting before doing the renaming.
But I think that in theory the same problem can occur on illumos as well,
because the unmounting is done in userland before invoking the rename ioctl and
there could be a race with, e.g., zfs mount.
panic: solaris assert: dmu_objset_hold(osname, zfsvfs, &zfsvfs->z_os) == 0 (0x2
== 0x0), file: /usr/devel/svn/head/sys/cddl/contrib/opensolaris/uts/common/fs/
zfs/zfs_vfsops.c, line: 2210
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe004df30710
vpanic() at vpanic+0x182/frame 0xfffffe004df30790
panic() at panic+0x43/frame 0xfffffe004df307f0
assfail3() at assfail3+0x2c/frame 0xfffffe004df30810
zfs_resume_fs() at zfs_resume_fs+0xb9/frame 0xfffffe004df30860
zfs_ioc_rollback() at zfs_ioc_rollback+0x61/frame 0xfffffe004df308a0
zfsdev_ioctl() at zfsdev_ioctl+0x65c/frame 0xfffffe004df30940
devfs_ioctl_f() at devfs_ioctl_f+0x156/frame 0xfffffe004df309a0
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe004df30a00
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe004df30ae0
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe004df30bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe004df30bf0
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
MFC after: 2 weeks
It was very wrong to look at the vnode and znode internals without
having locked the vnode first.
Reported by: pho
Tested by: pho
MFC after: 1 week
X-MFC with: r308887
longer used. More precisely, they are always zero because the code that
decremented and incremented them no longer exists.
Bump __FreeBSD_version to mark this change.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8583
The idea was to avoid a false assertion in zfs_lock, but it was
implemented very dangerously and incorrectly.
Reported by: pho
Tested by: pho
MFC after: 1 week
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
These are FreeBSD-specific and were added in r178576 to provide the ability
to pretty-print instances of compound types. However, the print action has
long since been augmented to provide this functionality with a simpler
interface.
Discussed with: gnn
Differential Revision: https://reviews.freebsd.org/D8478
Before this an earlier writes to a ZVOL opened without FSYNC could get to
ZIL after later writes to the same ZVOL opened with FSYNC. Fix this by
replicating functionality of ZPL (zv_sync_cnt equivalent to z_sync_cnt),
marking all log records sync if anybody opened the ZVOL with FSYNC.
MFC after: 2 weeks
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
It allows to avoid extra GEOM providers flapping without significant need.
Since GEOM got resize support, we don't need to reopen provider to get new
size. If provider was orphaned and no longer valid, ZFS should already
know that, and in such case reopen should be done in full as expected.
MFC after: 2 weeks
In case of vdev detach, causing top level mirror vdev destruction, leaf
vdev changes its GUID to one of the destroyed mirror, that creates race
condition when GUID in vdev label may not match one in the pool config.
This change replicates logic nuance of vdev_validate() by adding special
exception, matching the vdev GUID against the top level vdev GUID.
Since this exception is not completely reliable (may give false positives
if we fail to erase label on detached vdev), use it only as last resort.
Quick way to reproduce this scenario now is detach vdev from a pool with
enabled autoextend. During vdev detach autoextend logic tries to reopen
remaining vdev, that always fails now since in-memory configuration is
already updated, while on-disk labels are not yet.
MFC after: 2 weeks
illumos/illumos-gate@260af64db7260af64db7https://www.illumos.org/issues/3746
From the original change log:
It was possible for a reference to be added even with the lock held, and
for references added just after a lock release to be lost.
This bug was also independently found and reported in wesunsolve.net
issues 6985013 6995524.
In zrl_add(), always use an atomic operation to update the refcount.
The mutex in the ZRL only guarantees that wakeups occur for waiters on the
lock. It offers no protection against concurrent updates of the refcount.
The only refcount transition that is safe to perform without an atomic
operation is from ZRL_LOCKED back to 0, since this can only be performed
by the thread which has the ZRL locked.
Authored by: Will Andrews <will@freebsd.org>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Pavel Zakharov <pavel.zakha@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Youzhong Yang <yyang@mathworks.com>
PR: 204037
MFC after: 1 week
These allocations can reach up to 128KB, while FreeBSD kernel allocator
can cache allocations only up to 64KB. To avoid expensive allocations
for each large ZIL write use caching zio_buf_alloc() allocator instead.
To make it possible de-inline few instances of zil_itx_destroy().
6988 spa_sync() spends half its time in dmu_objset_do_userquota_updates
Using a benchmark which creates 2 million files in one TXG, I observe
that the thread running spa_sync() is on CPU almost the entire time we
are syncing, and therefore can be a performance bottleneck. About 50% of
the time in spa_sync() is in dmu_objset_do_userquota_updates().
The problem is that dmu_objset_do_userquota_updates() calls
zap_increment_int(DMU_USERUSED_OBJECT) once for every file that was
modified (or created). In this benchmark, all the files are owned by the
same user/group, so all 2 million calls to zap_increment_int() are
modifying the same entry in the zap. The same issue exists for the
DMU_GROUPUSED_OBJECT.
We should keep an in-memory map from user to space delta while we are
syncing, and when we finish, iterate over the in-memory map and modify
the ZAP once per entry. This reduces the number of calls to
zap_increment_int() from "number of objects modified" to "number of
owners/groups of modified files".
This reduced the time spent in spa_sync() in the file create benchmark
by ~33%, from 11 seconds to 7 seconds.
Closes#107
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Jinshan Xiong <jinshan.xiong@intel.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@5fc46359c5
5120 zfs should allow large block/gzip/raidz boot pool (loader project)
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Toomas Soome <tsoome@me.com>
openzfs/openzfs@c8811bd3e2
FreeBSD still does not support booting from gzip-compressed datasets,
so keep one chunk of this commit out.
Suppose that we have an exclusively busy page, and a thread which can
accept shared-busy page. In this case, typical code waiting for the
page xbusy state to pass is
again:
VM_OBJECT_WLOCK(object);
...
if (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(object); <---1
vm_page_busy_sleep(p, "vmopax");
goto again;
}
Suppose that the xbusy state owner locked the object, unbusied the
page and unlocked the object after we are at the line [1], but before we
executed the load of the busy_lock word in vm_page_busy_sleep(). If it
happens that there is still no waiters recorded for the busy state,
the xbusy owner did not acquired the page lock, so it proceeded.
More, suppose that some other thread happen to share-busy the page
after xbusy state was relinquished but before the m->busy_lock is read
in vm_page_busy_sleep(). Again, that thread only needs vm_object lock
to proceed. Then, vm_page_busy_sleep() reads busy_lock value equal to
the VPB_SHARERS_WORD(1).
In this case, all tests in vm_page_busy_sleep(9) pass and we are going
to sleep, despite the page being share-busied.
Update check for m->busy_lock == VPB_UNBUSIED in vm_page_busy_sleep(9)
to also accept shared-busy state if we only wait for the xbusy state to
pass.
Merge sequential if()s with the same 'then' clause in
vm_page_busy_sleep().
Note that the current code does not share-busy pages from parallel
threads, the only way to have more that one sbusy owner is right now
is to recurse.
Reported and tested by: pho (previous version)
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8196
Other uses of cache_purgevfs() do rely on the cache purge for correct
operations, when paths are invalidated without unmount.
Reported and tested by: jkim
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
This should allow vn_fullpath() to work even when vfs name cache is
disabled for zfs, which is the case when zfs properties like
casesensitivity and normalization are set non-default values.
The new code should be 100% reliable for directories and "mostly"
reliable for files, that is, when hardlinks across directories are
not used.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Reviewed by: kib (vfs contract)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8146
For the extended attributes the order between z_teardown_lock and the
vnode lock is different.
The bug was triggered only with DIAGNOSTIC turned on.
This fix is developed in cooperation with avos.
PR: 213112
Reported by: avos
Tested by: avos
MFC after: 1 week
This restriction was inherited from upstream but is not relevant on FreeBSD.
Furthermore, it hindered the tracing of locking primitive subroutines.
MFC after: 1 week
Until we can resolve the numerous hole_birth bugs that have cropped up
recently, and come up with a way going forwards to protect users from
corruption, we should disable the hole_birth feature. Using a tunable
allows those who are confident that their data is correct to continue to
take advantage of the feature.
Closes#188
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
dsl_dataset_space is looking at the ds_bp's fill count while
dmu_objset_write_ready() is concurrently modifying it. This fix adds an
rrwlock to protect the ds_bp.
Closes#180
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
Background. In ZFS a file with extended attributes has a special
directory associated with it where each extended attribute is a file.
The attribute's name is a file name and its value is a file content.
When the ownership of a file with extended attributes is changed, ZFS
also changes ownership of the special directory. This is where the bug
was hit.
The bug was introduced in r209158.
Nota bene. ZFS vnode locks are typically acquired before
z_teardown_lock (i.e., before ZFS_ENTER). But this is not the case for
the vnodes that represent the extended attribute directory and files.
Those are always locked after ZFS_ENTER. This is confusing and fragile.
PR: 212702
Reported by: Christian Fuss to FreeNAS
Tested by: mav
MFC after: 1 week
Otherwise there exists a narrow window during which a syscall probe can be
disabled and cause a concurrently-running thread to call dtrace_probe()
with an invalid probe ID.
Reported by: ngie
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Our shim for Solaris random_get_bytes() uses read_random(), that looks
reasonable, since it guaranties reliably seeded random data. On the other
side Solaris random_get_pseudo_bytes() does not provide this guarantie,
and its original Solaris implementation is equivalent to our arc4rand(),
using software crypto without stressing slower hardware RNG.
The DS_FIELD_LARGE_BLOCKS macro has been unused since the integration of
this patch:
commit ca0cc3918a1789fa839194af2a9245f801a06b1a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Fri Jul 24 09:53:55 2015 -0700
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@608764bead
The upstream change introduced a new load state, SPA_LOAD_CREATE,
and vdev_geom code needs to be aware of it.
Tested by: cy
MFC after: 1 week
X-MFC with: r305331
Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).
dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:
dmu_buf_hold_noread()
dmu_buf_hold()
zap_lookup()
zap_lookup_norm()
zap_count_write()
zap_lockdir()
zap_count_write()
This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.
Sponsored by: Intel Corp.
Closes#109
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@d3e523d489
This resolves two 'zfs recv' issues. First, when receiving into an
existing filesystem, a snapshot created during the receive process is
not added to the guid->dataset map for the stream, resulting in failed
lookups for deduped streams when a WRITE_BYREF record refers to a
snapshot received earlier in the stream. Second, the newly created
snapshot was also not set properly, referencing the snapshot before the
new receiving dataset rather than the existing filesystem.
Closes#159
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Author: Chris Williamson <chris.williamson@delphix.com>
openzfs/openzfs@b09697c8c1
zap_lockdir() / zap_unlockdir() should take a "void *tag" argument which
tags the hold on the zap. This will help diagnose programming errors
which misuse the hold on the ZAP.
Sponsored by: Intel Corp.
Closes#108
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@0780b3eab5
7230 add assertions to dmu_send_impl() to verify that stream includes BEGIN and END records
illumos/illumos-gate@12b90ee2d3https://github.com/illumos/illumos-gate/commit/12b90ee2d3b10689fc45f4930d2392f5f
e1d9cfa
https://www.illumos.org/issues/7230
A test failure occurred where a send stream had only a BEGIN record. This
should not be possible if the send returns without error. Prevented this from
happening in the future by adding an assertion to dmu_send_impl() to verify
that if the function returns 0 (success) both a BEGIN and END record are
present. Did this by adding flags to dmu_sendarg_t (indicating whether BEGIN o
r
END records sent), having dump_record() set flags appropriately, adding VERIFY
statement to dmu_send_impl().
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matt Krantz <matt.krantz@delphix.com>
